• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.21-48
• /
• 1974

The studies were carried out to disclose the physical and chemical properties of sericin fraction obtained from silk cocoon shells and its characteristics of swelling and solubility. The following results were obtained. 1. The physical and chemical properties of sericin fraction. 1) In contrast to the easy water soluble sericin, the hard soluble sericin contains fewer amino acids include of polar side radical while the hard soluble amino acid sach as alanine and leucine were detected. 2) The easy soluble amino acids were found mainly on the outer part of the fibroin, but the hard soluble amino acids were located in the near parts to the fibroin. 3) The swelling and solubility of the sericin could be hardly assayed by the analysis of the amino acid composition, and could be considered to tee closely related to the compound of the sericin crystal and secondary structure. 4) The X-ray patterns of the cocoon filament were ring shape, but they disappeared by the degumming treatment. 5) The sericin of tussah silkworm (A. pernyi), showed stronger circular patterns in the meridian than the regular silkworm (Bombyx mori). 6) There was no pattern difference between Fraction A and B. 7) X-ray diffraction patterns of the Sericin 1, ll and 111 were similar except interference of 8.85A (side chain spacing). 8) The amino acids above 150 in molecular weight such as Cys. Tyr. Phe. His. and Arg. were not found quantitatively by the 60 minutes-hydrolysis (6N-HCI). 9) The X-ray Pattern of 4.6A had a tendency to disappear with hot-water, ether, and alcohol treatment. 10) The partial hydrolysis of sericin showed a cirucular interference (2A) on the meridian. 11) The sericin pellet after hydrolysis was considered to be peptides composed with specific amino acids. 12) The decomposing temperature of Sericin 111 was higher than that of Sericin I and II. 13) Thermogram of the inner portioned sericin of the cocoon shell had double endothermic peaks at 165$^{\circ}C$, and 245$^{\circ}C$, and its decomposing temperature was higher than that of other portioned sericin. 14) The infrared spectroscopic properties among sericin I, II, III and sericin extracted from each layer portion of the cocoon shell were similar. II. The characteristics of seriein swelling and solubility related with silk processing. 1) Fifteen minutes was required to dehydrate the free moisture of cocoon shells with centrifugal force controlled at 13${\times}$10$^4$ dyne/g at 3,000 R.P.M. B) It took 30 minutes for the sericin to show positive reaction with the Folin-Ciocaltue reagent at room temperature. 3) The measurable wave length of the visible radiation was 500-750m${\mu}$, and the highest absorbance was observed at the wave length of 650m${\mu}$. 4) The colorimetric analysis should be conducted at 650mu for low concentration (10$\mu\textrm{g}$/$m\ell$), and at 500m${\mu}$ for the higher concentration to obtain an exact analysis. 5) The absorbing curves of sericin and egg albumin at different wave lengths were similar, but the absorbance of the former was slightly higher than that of the latter. 6) The quantity of the sericin measured by the colorimetric analysis, turned out to be less than by the Kjeldahl method. 7) Both temperature and duration in the cocoon cooking process has much effect on the swelling and solubility of the cocoon shells, but the temperature was more influential than the duration of the treatment. 8) The factorial relation between the temperature and the duration of treatment of the cocoon cooking to check for siricin swelling and solubility showed that the treatment duration should be gradually increased to reach optimum swelling and solubility of sericin with low temperature(70$^{\circ}C$) . High temperature, however, showed more sharp increase. 9) The more increased temperature in the drying of fresh cocoons, the less the sericin swelling and solubility were obtained. 10) In a specific cooking duration, the heavier the cocoon shell is, the less the swelling and solubility were obtained. 11) It was considered that there are differences in swelling or solubility between the filaments of each cocoon layer. 12) Sericin swelling or solubility in the cocoon filament was decreased by the wax extraction.. 13) The ionic surface active agent accelerated the swelling and solubility of the sericin at the range of pH 6-7. 14) In the same conditions as above, the cation agent was absorbed into the sericin. 15) In case of the increase of Ca ang Mg in the reeling water, its pH value drifted toward the acidity. 16) A buffering action was observed between the sericin and the water hardness constituents in the reeling water. 17) The effect of calcium on the swelling and solubility of the sericin was more moderate than that of magnecium. 18) The solute of the water hardness constituents increased the electric conductivity in the reeling water.

• The Korean Journal of Ecology
• /
• v.23 no.5
• /
• pp.397-406
• /
• 2000

In order to clarify the ecophysiological characteristics of Chenopodiaceae which widely distribute on saline and arid habitats, we collected 10 chenopodiaceous plant species, examined their inorganic and organic solute patterns, and confirmed several common physiological characteristics. In spite of high soil Ca/sup 2＋/ contents, chenopodiaceous plants had a little water-soluble Ca within cells, but contained high contents of acid-soluble Ca particularly as a result of Ca-oxalate formation. These plant species also showed accumulation of inorganic ions such as K/sup ＋/, NO₃/sup －/ and Cl/sup －/, and Na/sup ＋/especially in saline habitats instead of K/sup ＋/ Meanwhile, with respect to nitrogen metabolism they retained high N contents in leaves, but showed very low amino acid contents. Additionally, they contained very little proline known to act as a cytoplasmic osmolyte. To ascertain whether this physiological characteristics in the field also can be found under controlled conditions, 7 chenopodiaceous plants (Atriplex gmelini, Corispermum stauntonii, Salicornia herbacea, Suaeda aspayagoides, Suaeda japonica, Chenopodium album var. centrorubrum, C. serotinum) were selected and cultivated under salt treatments. As well as field-grown plants, selected plant species showed similar solute pattern in growth experiment. In summary, the family of Chenopodiaceae represents the following physiological properties; high storage capacity for inorganic ions (especially alkali cations, nitrate and chloride), oxalate synthesis to maintain lower soluble Ca contents within cytoplasm, and low contents of amino acids. In addition to some characteristics mentioned above, the physiological plasticities of Chenopodiaceae which can properly regulate their ion and solute pattern according to soil conditions may enable its representative to grow in dry sand dune and salt marsh habitats.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.578-583
• /
• 2010

Acid rain and its problem to environment such as acid precipitation and environmental problems related to the air pollution in East Asia has been emerging. To evaluate the acidity and chemical characteristics of rainwater precipitated in western Korea, Suwon and Taean, its pH and ion concentrations were investigated during farming season (April to November) in 2009. Also, ion composition and cation-affected neutralization were determined to evaluate the contribution of cations on the acidity of rainwater. Ion and electrical conductivity between the measured and the estimated showed high correlation. The $Na^+$ in rainwater was the main cation followed by ${NH_4}^+>Ca^{2+}>H^+>Mg^{2+}>K^+$. Sum of $Na^+$ and ${NH_4}^+$ contents was over 65% of total cations contents. In the case of anions, the concentration was in order of ${SO_4}^{2-}>{NO_3}^->Cl^-$. The ${SO_4}^{2-}$ among anions in rainwater composed about 61%, which showed on average 130.2 ${\mu}eq\;L^{-1}$ and 121.3 ${\mu}eq\;L^{-1}$ during monitoring at Suwon and Taean, respectively. Also, 89.6 and 88.6% of soluble sulfate in rainwater at Suwon and Taean area was NSS-${SO_4}^{2-}$ (Non-Sea Salt sulfate). Especially, ${NH_4}^+$ and $Ca^{2+}$ contributed greatly in neutralizing the acid rain in dry season. Total nitrogen content flowed into soil from rain was around 1~2 kg $ha^{-1}$ in each month, but in July at Suwon, it reached 6 kg $ha^{-1}$ due to heavy rain (over 7.3 mm).

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.113-125
• /
• 2007

To know the differences in ionic compositions in rain and snow as well as snow influence on the chemical characteristics of winter precipitation, precipitation samples were collected by the wet-only automatic precipitation sample, in winter(November-February) in the Iksan located in the northwest of Chonbuk from 1995 to 2000. The samples were analyzed for concentrations of water-soluble ion species, in addition to pH and electrical conductivity. The mean pH of winter precipitation was 4.72. According to the type of winter precipitation, the mean pH of rain was 4.67 and lower than 5.05 in snow. The frequencies of pH below 5.0 in rain were about 73%, while those in snow were about 30%. Snow contained 3 times higher concentrations of sea salt ion components originated from seawater than did rain in winter, mainly $Cl^-,\;Na^+$, and $Mg^{2+}$. Neglecting sea salt ion components, $nss-SO_4^{2-}$ and $NO_3^-$ were important anions and $NH_4^+$ and $nss-Ca^{2+}$ were important cations in both of rain and snow. Concentrations of $nss-SO_4^{2-}$ was 1.3 times higher in rain than in snow, while those of $nss-Ca^{2+}$ and $NO_3^-$ were 1.5 and 1.3 times higher in snow, respectively. The mean equivalent concentration ratio of $nss-SO_4^{2-}/NO_3^-$ in winter precipitation were 2.4, which implied that the relative contribution of sulfuric and nitric acids to the precipitation acidity was 71% and 29%, respectively. The ratio in rain was 2.7 and higher than 1.5 in snow. These results suggest that the difference of $NO_3^-$ in rain and snow could be due to the more effective scavenging of $HNO_3$ vapor than particulate sulfate or nitrate by snow. The lower ratio in snow than rain is consistent with the measurement results of foreign other investigators and with scavenging theory of atmospheric aerosols. Although substantial $nss-SO_4^{2-}$ and $NO_3^-$ were observed in both of rain and snow, the corresponding presence of $NH_4^+,\;nss-Ca^{2+},\;nss-K^+$ suggested the significant neutralization of rain and snow. Differences in chemical composition of non-sea salt ions and neutralizing rapacity of $NH_4^+,\;nss-Ca^{2+}$, and $nss-K^+$ between rain and snow could explain the acidity difference of rain and snow. Snow affected that winter precipitation could be less acidic due to its higher neutralizing rapacity.

• Applied Biological Chemistry
• /
• v.15 no.2
• /
• pp.93-109
• /
• 1972

Three lots of Chung-Kook-Jang were prepared by the use of 2 strains of Bacillus subtilis and Bacillus natto. For four samples taken from each lot in 12 hrs interval changes of nitrogenous compounds, insoluble protein, water soluble protein, peptides, free amino acids, amino and ammonia nitrogens during Chung-Kook-Jang fermentation, were studied together with the changes of moisture, pH, proteolytic enzyme activity. In addition the average peptide length of the peptides of a Bacillus subtilis lot was determined by the method of molecular sieving using ion exchange resin. The results were as follows: 1. The contents of moisture and total-nitrogen changed little in all samples throughout the fermentation as it would be expected. 2. In all three experimental lots the pH became higher gradually from the initial value of 6.65 to the final $7.5{\sim}7.85$ during the fermentation. Proteolytic enzyme activities, in accordance with this pH change, steadily increased up to $48{\sim}60$ hrs. of fermentation and then slightly decreased, probably affected by the high pH. The most strong proteolytic activity was observed in the experimental Chung-Kook-Jang fermentation lot using the Bacillus subtilis K-27 isolated by the author. 3. The contents of insoluble protein nitrogen in soybeans increased markedly (5%) by the cooking, after steeping 12 hrs in water. During the Chung-Kook-Jang fermentation, however, it decreased from 1/2 to 1/10 of that of the cooked soybeans. 4. The contents of water soluble protein nitrogen (5%) whereas, greatly decreased to the value of 1.0% by the cooking; but little changed further during the fermentation, 5. The total contents (0.25%) of peptides, amino, and ammonia-nitrogens, PAA-N., increased almost double by the cooking and steadily became higher as the fermentation proceeded, reaching finally up to$4{\sim}7%$ in 72 hrs fermentation. 6. The amounts of free amino acids of soybean generally decreased during the processing of cooking, even some of them like glutamic acid were destroyed completely, However in the subsequent Chung-Kook-Jang fermentation for 72 hrs., they showed from several to a few hundreds folds increases depending upon the kinds of amino acids. Valine which was contained in HCl-hydrolyzed steeped or cooked soybeans in amounts $220{\sim}267mg%$ was not detected at all as the free amino acid in all fermented samples. 7. Average peptide length (APL) of all fractions, eluted and fractionated by using the Dowex-50 ion exchange resin column, and fraction collector showed the highest value for the cooked soybean and then decreased as the fermentation proceeded. The APL value of effluent showed the highest in 12 hrs fermented sample, The value decreased thereafter by fermentation.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.57-64
• /
• 2006

The crack presented in concrete structures causes a structural defect, the durability decrease, and external damages etc. Therefore, it is necessary to improve durability through the effort to control the crack. Fluosilicic acid($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicates prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.0{\sim}2.0%$ of adding ratio of fluosilicate salt based inorganic compound. To evaluate correlation of concrete strength and adding ratio of fluosilicate salt based inorganic compound, the tests were performed about design strength(21, 24, 27 MPa) with 0.5% of adding ratio of fluosilicate salt based inorganic compound. Applications of fluosilicate salt based inorganic compound to reduce cracks resulted from plastic and drying shrinkage, to improve durability are presented in this paper. Durability was evaluated as neutralization, chloride ion penetration depth, freezing thawing resistant tests and weight loss according reinforcement corrosion. It is ascertained that the concrete added fluosilicate salt based inorganic compound showed m ability to reduce the total area and maximum crack width significantly as compared non-added concrete. In addition, the durability of concrete improved because of resistance to crack and watertightness by packing role of fluosilicate salt based inorganic compound obtained and pozzolanic reaction of soluble $SiO_2$ than non-added concrete.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.183-187
• /
• 1997

The analytical conditions of 1,3-dichloro-2-propanol (DCP) and 3-chloro-1,2-propanediol (MCPD) by solid phase extraction were optimized to improve recovery. Selected-ion monitoring technique which was used for GC-MS analysis of both compounds gave substantially higher sensitivity. The detection limits of DCP and MCPD were 25 and 50 ppb, respectively. The effects of extraction column type, elution solvent and salt concentration on recovery were examined. A normal phase column was better than a reverse phase column in solid phase extraction of DCP and MCPD. It was explained in terms of polarity relationship of solvent-solute-solid phase. A maximum recovery was obtained at the salt concentration of 20% (w/v). Water-immiscible and chloropropanol-soluble solvents such as chloroform, diethyl ether, hexane and ethyl acetate were tested for elution solvent. Hexane and ethyl acetate were the most suitable solvents for the extraction of DCP and MCPD, respectively. High recovery better than 95% was obtained with the selected solvents.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.152-157
• /
• 2007

In an attempt to develop functional salts having beneficial health effects, we experimentally prepared three functional salts by fortification with soluble seaweed minerals (Hizikia mineral salt, HMS), fucoidan (fucoidan salt, FS) and laver extracts (laver salt, LS). To characterize the functional salts, their physicochemical properties and in vitro functionalities, such as pH, color, mineral composition, solubility, oxidation-reduction potential, sensory properties, angiotesin converting enzyme (ACE) inhibitory activity, and bile acid binding capacity were investigated. The functional salts revealed slightly lower NaCl concentrations, but showed a variety of pH values compared with conventional table salt. The pH values of HMS, FS, and LS were 11.3, 6.8, and 6.5, respectively. The oxidation-reduction potentials (ORP) of the functional salts varied from -229 mV to 38 mV, significantly lower than refined salt. The functional salts were significantly darker in color than refined salt, and the mineral composition of HMS was considerably enriched compared to refined salt, particularly in potassium ion. As a result of the sensory evaluation, FS and LS were comparatively palatable in saltiness, pungency, bitterness, and overall acceptance compared with refined salt. It was also found that one functional salt had ACE inhibitory activity (54.8% in LS) and another had bile acid binding capacity (80.7% in FS).

• The Korean Journal of Mycology
• /
• v.27 no.2 s.89
• /
• pp.170-174
• /
• 1999

Water-soluble polysaccharides from the fruiting bodies of Agaricus blazei Murill were extracted with 0.9% sodium chloride and hot water, successively. The purified polysaccharides showed a potent immunostimulating activity. Eight major polysaccharides, which were named from AG-l to AG-8, were fractionated and purified by ethanol precipitation, ion exchange chromatography on DEAE-cellulose and gel filtration on Toyopearl HW 65F. These polysaccharides were identified to be homogeneous by analysis of HPLC. Three major active polysaccharides (AG-2, -3, and -6) showed relatively strong immunostimulating activity. AG-2 and -3 were composed of glucose, galactose and mannose in the molar ratios of 74.0:15.3:10.7 and 63.6:17.6:12.7, respectively. AG-6 was composed of glucose and ribose in the molar ratios of 81.4:12.6.

• The Korean Journal of Mycology
• /
• v.18 no.2
• /
• pp.58-69
• /
• 1990

ABSTRACT: In order to find physiologically active components from higher fungi, hot-water soluble components were extracted from the basidiocarps of Ganoderma lucidum. The extract was purified and separated by DEAE cellulose ion exchange chromatography and Sepharose CL-4B gel filtration method. The separated fractions were designated CR, IN, IA, GL and GH. Fraction GL showed the highest antitumor activity among the fractions and its molecular weight was found to be 47 KD. The tumor inhibition ratio of Fr. GL was 81 % at the dose of peritoneal administration of 20 mg/kg/day for 10 days in mice. Chemical analysis of this fraction showed 82% polysaccharide, 8% protein and 0.9% hexosamine. The polysaccharide moiety consisted of 63% glucose, 27% galactose, 7% mannose and 3% fucose. Fraction IN was found to increase the amount of superoxide anion in activated macrophages to 1.6-fold and the number of plaques in hemolytic plaque assay to 6-fold, respectively. These results indicate that the antitumor activity was exerted through immunopotentiation, but not through direct cytotoxicity against the tumor.