• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.165-173
• /
• 2001

This study examinated the application in construction field and the development of waterproofing material system by the spray water-soluble rubber asphalt to solve the problems of synthetic polymer sheet and gio membrane(A mat sheet of Bentonite) that had been used domestic waterproofing material in advance. As the result of study, characters of study water-soluble rudder asphalt are the follows: 1) The amount of water absorption was '0.06'g and the seepage quality was '0'g in result. 2) The tensile strength was about 30.7kgf/$\textrm{cm}^2 and the elongation was about 72.4% in result. 3) After reliance of temperature test had been ended, the tensile strength was about 72.4kgf/$\textrm{cm}^2 in low temperature and about 30.7kgf/$\textrm{cm}^2 in normal temperature. 4) After acid and alkaline treatment had been ended, the tensile strength was about 19.7kgf/$\textrm{cm}^2$ and about 21.9kgf/$\textrm{cm}^2 in result. 5) After chlorine ion treatment had been ended, the tensile strength was 28.5kgf/$\textrm{cm}^2$ and the elongation was 250% in result. 6) The impact performance was subsided at 1.5m height. 7) After promotion weathering had been ended, the tensile and elongation was about 26.0kgf/$\textrm{cm}^2, 214% in result. So, this study can propose the spray water-soluble rubber asphalt to satisfy the and durability of waste filled land.

• Journal of Pharmaceutical Investigation
• /
• 제25권1호
• /
• pp.31-36
• /
• 1995

Solid dispersions and inclusion complex were prepared for the enhancement of solubility and dissolution rate of poorly water-soluble ibuprofen(IPF) as a model drug. Polyethylene glycol 4000(PEG4000) and polyvinylpyrrolidone(PVP) were used for the preparation of solid dispersion. $2-Hydroxypropyl-{\beta}-cyclodextrin(2-HP{\beta}CD)$ was also used for the preparation of inclusion complex. The solubility of IPF increased as the concentration of PEG4000, PVP and $2-HP{\beta}CD$ increased. Solubilization capacity of $2-HP{\beta}CD$ was increased about 10 times when compared to PEG 4000 and PVP. The dissolution rate of drug from solid dispersions and inclusion complex in the simulated gastric fluid was enhanced when compared to pure IPF and commercial $BR4^{\circledR}$ tablet as a result of improvement of solubility. In case of solid dispersions, dissolution rate of drug was proportional to polymer concentration in the formulation. The marked enhancement of dissolution rate of drug by inclusion complexation with $2-HP{\beta}CD$ was noted. However, dissolution rate of drug from solid dispersions and inclusion complex in the simulated intestinal fluid was not significant because IPF was readily soluble in that condition. From these findings, water-soluble polymers and cyclodextrin were useful to improve solubility and dissolution rate of poorly water-soluble drugs. However, easiness and reliability of preparation method, scale-up and cost of raw materials must be considered for the practical application of solid dispersion and inclusion complex in pharmaceutical industry.

• 공업화학
• /
• 제9권2호
• /
• pp.306-310
• /
• 1998

용해성 PMDA/diamine/dianhydride 폴리이미드를 제조하여 특성을 고찰하고, 상용 알루미나 세라믹막내에 제조한 PMDA/diamine/dianhydride 용액을 코팅하여 기체투과특성을 알아보았다. Tg는 $337{\sim}358^{\circ}C$의 범위로 열적안정성은 우수함을 보였다. 용해성에 있어서는 NMP, DMAc, DMSO, THF, m-cresol의 극성 용매에 대해 대부분 좋은 결과를 보여 주었다. 알루미나막과 용해성 폴리이미드의 점착은 잘 이루어졌으며, 기체투과실험에 있어 6FDA를 포함한 폴리이미드의 경우 높은 투과도를 보였다. PMDA/1,3PDA/6FDA의 경우 질소투과도는 약 $7.6{\times}10^{-7}(mol/m^2{\cdot}Pa{\cdot}s)$의 값을 나타내었고, 질소에 대한 산소의 이상적 분리도, $P(O_2/N_2)$는 6.19였으며, $P(H_2/N_2)$의 경우는 약 70.0의 이상적 분리도를 보였다.

• 폴리머
• /
• 제39권2호
• /
• pp.225-234
• /
• 2015

In this study, we proposed to synthesize thermally stable, soluble and conjugated Schiff base polymer (SbP). For this reason, a specific molecule namely 4,4'-thiodiphenol which has sulfur and oxygen bridge in its structure was used to synthesize bi-functional monomers. Bi-functional amino and carbonyl monomers namely 4,4'-[thio-bis(4,1-phenyleneoxy)] dianiline (DIA) and 4,4'-[thiobis(4,1-phenyleneoxy)]dibenzaldehyde (DIB) were prepared from the elimination reaction of 4,4'-thiodiphenol with 4-iodonitrobenzene and 4-iodobenzaldehyde, respectively. The structures of products were confirmed by elemental analysis, FTIR, $^1H$ NMR and $^{13}C$ NMR techniques. The molecular weight distribution parameters of SbP were determined by size exclusion chromatography (SEC). The synthesized SbP was characterized by solubility tests, TG-DTA and DSC. Also, conductivity values of SbP and SbP-iodine complex were determined from their solid conductivity measurements. The conductivity measurements of doped and undoped SbP were carried out by Keithley 2400 electrometer at room temperature and atmospheric pressure, which were calculated via four-point probe technique. When iodine was used as a doping agent, the conductivity of SbP was observed to be increased. Optical band gap ($E_g$) of SbP was also calculated by using UV-Vis spectroscopy. It should be stressed that SbP was a semiconductor which had a potential in electronic and optoelectronic applications, with fairly low band gap. SbP was found to be thermally stable up to $300^{\circ}C$. The char of SbP was observed 29.86% at $1000^{\circ}C$.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.343-347
• /
• 2006

A novel, blue light-emitting polymer, poly(phenyl-9,9-dioctyl-9',9'dihexanenitrile)fluorene (PPFC6N), containing an alkyl and cyano group in the side chain, was synthesized by Suzuki polymerization and characterized. The polymer structure was confirmed by $^1H-NMR$. The number average molecular weight and the weight average molecular weight of the obtained polymer were 9,725 and 9,943 respectively. The resulting polymer was thermally stable with a glass transition temperature ($T_g$) of $93^{\circ}C$, and was easily soluble in common organic solvents such as THF, toluene, chlorobenzene and chloroform. The HOMO and LUMO energy levels of the polymer were revealed as 5.8 and 2.88 eV by cyclic voltammetry study, respectively. The ITO/PEDOT:PSS (40 nm)/PPFC6N (80 m)/LiF (1 nm)/Al (150 nm) device fabricated from the polymer emitted a PL spectrum at 450 nm and showed a real blue emission for pure PPFC6N in the EL spectrum. When t-butyl PBD was introduced as a hole blocking layer, the device performance was largely improved and the EL spectrum was slightly shifted toward deep blue. The device with PPFC6N containing t-butyl PBD layer showed the maximum luminance of 3,200 $cd/m^2$ at 9.5 V with a turnon voltage of 7 V.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.103-107
• /
• 2002

High purity water soluble chitosans (WsCs) were employed as a flocculant to remove heavy metal ions from wastewater of industrial plating wastewater treatment complex. Their weight average molecular weights and polydispersities were 272,000~620,000 g/mol and 1.4~1.9 range, respectively and were readily soluble in water in the pH range of 3~11. Heavy metal ions such as chromium, iron and copper were removed well by WsCs. When WsCs was blended with either sodium N, N-diethyldithiocarbamate trihydrate (SDDC$_{T}$) or sodium salicylate (SSc), the removal efficiency was further increased primarily due to the excess amount of hydrophilic sulfonic and carboxylic groups. Especially, in the case of WsCs-SSc the remaining chromium and copper concentrations were 0.1 mg/L and 9.5 mg/L, which are 1/15 and 1/3 compared with that of pure WsCs, respectively. The former is within the acceptable limit, but the latter is not. Therefore, the effective copper flocculant remains to be studied.d.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.163-168
• /
• 2001

This study examinated the application in construction field and the development of waterproofing material system by the spray water-soluble rubber asphalt to solve the problems of synthetic polymer sheet and gio membrane(A mat sheet of Bentonite) that had been used domestic waterproofing material in advance. As the result of study, characters of study water-souble rubber asphalt are the follows; 1) The amount of water absorption was '0.06'g and the seepage quantity was '0'g in result. 2) The tensile strength was about 30.7kgf/$cm^2$ and the elongation was about 72.4% in result. 3) After reliance of temperature test had been ended, the tensile strength was about 72.4kg/$cm^2$ in low temperature and about 30.7kgf/$cm^2$ in normal temperature. 4) After acid and alkaline treatment had been ended, the tensile strength was about 19.7kgf/$cm^2$ and about 21.9kgf/$cm^2$ in result. 5) After chlorine ion treatment had been ended, the tensile strength was 28.5kgf/$cm^2$ and the elongation was 250% in result. So, this study can propose the spray water-soluble rubber asphalt to satisfy the security and durability of waste filled land.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.187-190
• /
• 2002

Poly(vinyl alcohol) (PVA) is a representative hydrophilic and water-soluble polymer and widely employed in various applications such as fibers for clothes and industries, films, membranes, medicines for drug delivery system, and cancer cell-killing embolic materials. Moreover, PVA fibers, gels, and films are potentially high-performance materials because they have high tensile and impact strengths, high tensile modulus, high abrasion resistance, excellent alkali resistance, and oxygen barrier property which are superior to those of any known polymers[1,2]. (omitted)

• Journal of Pharmaceutical Investigation
• /
• 제5권4호
• /
• pp.17-23
• /
• 1975

복용량이 비교적 적고, 난용성 의약품(醫藥品)으로 antirheumatism에 사용되고 있는 phenylbutazone을 macromolecule polymer로서 water soluble carrier인 polyvinylpyrrolidone과 solvent method로 1:1, 1:5, 및 1:9(w/w)의 coprecipitate를 형성(形成)시켰으며, 이들 coprecipitate의 용출 속도를 Pure drug 및 coprecipitate 형성 용매인methanol에서 재결정한 recrystallized pure drug의 그것과 측정 비교(比較)하였다. 1:1,1:5 및 1:9(w/w)의 coprecipitate는 recrystallized pure phenylbutazone보다 약 4.5배의 용출의 증가를 보였고, 이들 1:1,1:5,1:9(w/w)에서의 그 carrier의 양(量)에 따른 용출에의 영향은 거의 없었다. 시간(時間)에 대(對)한 log probit를 plot하여 구(求)한 dissolution half life, $T_{50%}$는 coprecipitate ratio 1:1(w/w)에서는 5.5분, 1:5에서는 10분, 1:9에서는 12.5분이었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.14.1-14.1
• /
• 2009

We found a high yield synthetic route to organic-soluble metal nanoparticles in the concentrated organic phase. The organic phase contains metal salt, amines, fatty acids, nonpolar solvent, and reducing agent. Even using only generic chemicals, organic-soluble silver and copper nanoparticles could be easily obtained by this simple and rapid reaction scheme at large scale. The hydrocarbon-protected metal nanoparticles showed excellent dispersion properties and were successfully printed onto polymer substrates. The printed pattern was heated at $200^{\circ}C$, which showed very low specific electrical resistance (< 10 uOhm$\cdot$cm), sufficient for conducting line of various printable devices.