• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1080-1084
• /
• 2009

Methyl 2,4-di-(2'-hydroxyethoxy)benzylidenecyanoacetate (3) was prepared and polymerized with terephthaloyl chloride to yield a novel Y-type polyester 4 containing 2,4-dioxybenzylidenecyanoacetate groups as NLOchromophores, which constituted parts of the polymer backbone. The resulting polymer 4 is soluble in common organic solvents such as acetone and N,N-dimethylformamide. Polymer 4 showed thermal stability up to 280 ${^{\circ}C}$ in thermogravimetric analysis with glass-transition temperature obtained from differential scanning calorimetry near 108 ${^{\circ}C}$. The second harmonic generation (SHG) coefficient ($d_{33}$) of poled polymer films at the 1064 nm fundamental wavelength was around $3.54\;{\time}\;10^{-9}$ esu. The dipole alignment exhibited a thermal stability up to near $T_g$ and no significant SHG decay was observed below 100 ${^{\circ}C}$ due to the partial main-chain character of polymer structure, which is acceptable for NLO device applications.

• Macromolecular Research
• /
• v.15 no.3
• /
• pp.234-237
• /
• 2007

3,4-Bis-(3,4-dicarboxyphenylcarboxyethoxy)-4'-nitrostilbene dianhydride was prepared and reacted with 4,4'-(hexafluoroisopropylidene)dianiline to yield a novel Y-type polyimide containing the 3,4-dioxynitrostilbenyl group as an NLO-chromophore, which constituted part of the polymer backbone. The resulting polyimide was soluble in polar solvents such as acetone and N,N-dimethylformamide. The polymer exhibited good thermal stability up to $370^{\circ}C$ in the thermogravimetric analysis. The glass-transition temperature ($T_g$) obtained from the differential scanning calorimetry thermogram was near to $153^{\circ}C$. The second harmonic generation (SHG) coefficient ($d_{33}$) of the poled polymer film at the fundamental wavelength of $1064\;cm^{-1}$ was around $2.15\;{\times}\;10^{-8}\;esu$ (9.01 pm/V). The dipole alignment exhibited exceptionally high thermal stability even at a temperature $30^{\circ}C$ above the $T_g$, and there was no SHG decay below $180^{\circ}C$ because of the partial main chain character of the polymer structure.

• Journal of Powder Materials
• /
• v.31 no.3
• /
• pp.263-271
• /
• 2024

This study focused on improving the solubility of silodosin, a drug poorly soluble in water, by utilizing solid dispersions. Three types of dispersions were examined and compared against the drug powder: surface-attached (SA), solvent-wetted (SW), and solvent-evaporated (SE). Polyvinyl alcohol (PVA) was identified as the most effective polymer in enhancing solubility. These dispersions were prepared using spray-drying techniques with silodosin and PVA as the polymer, employing solvents such as water, ethanol, and a water-acetone mix. The physicochemical properties and solubility of the dispersions were evaluated. The surface-attached dispersions featured the polymer on a crystalline drug surface, the solvent-wetted dispersions had the amorphous drug on the polymer, and the solvent-evaporated dispersions produced nearly round particles with both components amorphous. Testing revealed that the order of improved solubility was: solvent-evaporated, solvent-wetted, and surface-attached. The results demonstrated that the preparation method of the solid dispersions significantly impacted their physicochemical properties and solubility enhancement.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.389-395
• /
• 2009

To develop the carrier of hydrophobic antifungal agents based on low molecular weight water-soluble chitosan (LMWSC), LMWSC was chemically modified with deoxycholic acid (DA) which is one of the bile acid as a hydrophobic group. The nanoparticles (WSCDA) using DA conjugated LMWSC were characterized using dynamic light scattering (DLS) and transmittance electron microscope (TEM). The particle size of WSCDA ranged from 250 to 350 nm and increased with the number of DA substitution. The loaded itraconazole as an antifungal agent WSCDA nanoparticles (WSCDA-ITCN) were prepared by solvent evaporation method. The drug content and the loading efficiency were investigated approximately $9{\sim}10%$ and $61{\sim}68%$ by UV spectrophotometer, respectively. The release of drug from nanoparticles was slow and showed sustained release characteristics. Based on the results of release study that the higher DA contents in WSCDA, the slower the releasing rate, the WSCDA-ITCN could be used as an excellent antifungal agent.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2004

Acyclovir(ACV) is an important antiviral drug used extensively against infections caused by herpes viruses, especially herpes simplex and varicella zoster. Because of high crystallinity and large particle size, solubility of intact ACV is very low in water(1.3 mg/ml). The goal of this work is to enhance the solubility of ACV. To make solid dispersion, Polyethyleneglycol, Hydroxyprophylmethylcelluose and Polyvinylpyrrolidone were used as polymer carriers in this work. Polymer carriers and drug were dissolved in acetic acid. And then spray drying method and freeze drying method were used as solvent extraction. Morphology, crystallization and functional group were characterized using SEM, XRD and FT-IR. The result of in vitro test showed the sample using PVP as polymer carrier had higher dissolution rate(up to 466%) than intact ACV.

• Polymer(Korea)
• /
• v.37 no.4
• /
• pp.442-448
• /
• 2013

In this study, we developed and optimized hydrophilic polymer-based solid dispersion formulations (SDs) using a spray drying method for improving the aqueous solubility of eprosartan, one of poorly soluble drugs that has been broadly used for the treatment of high blood pressure. Hydroxylpropylcellulose (HPC) and poly(vinyl pyrrolidone) (PVP) were used as hydrophilic polymer matrices and poloxamer 407 (P407) added as a polymeric surfactant. Various kinds of solid dispersions with different drug/polymer compositions were prepared and their physico-chemical properties were compared. As the polymer content increased, the drug crystallinity in the SDs significantly decreased and the dissolution properties were enhanced. The PVP based SDs were observed to have relatively reduced crystallinity and an enhanced dissolution rate than HPC-based SDs, due to better miscibility between drug and polymer matrix. For PVP based SDs, the drug crystallinity almost disappeared and the dissolution properties significantly increased by more than 3~7 times.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.217-222
• /
• 2006

Polyimides have been investigated extensively and used widely over the past three decades because of their high performance properties such as excellent thermal, mechanical, and electrical properties. Polyimides are difficult to be processed because of the aromatic moieties, imide group, and insoluble nature in most organic solvents. The soluble polyimides were synthesized from 2,2,-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (BAPAF) and 3,3,-diamino-4,4-dihydroxybyphenyl (HAB) as aromatic diamines and 4,4-(hexafluoroisopropylidene)diphthalic dianhydride (6FDA), pyromellitic dianhydride (PMDA), 4,4-oxydiphthalic dianhydride (OPDA), 3,3,4,4-benzophenone tetracarboxylic dianhydride (BTDA) and 3,3,4,4-diphenylsulfone tetracarboxylic dianhydride (DSDA) as aromatic dianhydrides. The polyimides were characterized by NMR, FR-IR, TGA and the dielectric constant of the obtained polyimides was calculated from storage of electro-capacity. A novel photosensitive polyimide was synthesized by the reaction of polyimide, containing hydroxyl group and methacryloyl chloride using triethylamine. The good micro-pattern was obtained with photosensitive polyimide from the photolithographic technique.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.849-862
• /
• 2017

With growing interests in using bacterial biopolymers in geotechnical practices, identifying mechanical properties of soft gel-like biopolymers is important in predicting their efficacy in soil modification and treatment. As one of the promising candidates, dextran was found to be produced by Leuconostoc mesenteroides. The model bacteria utilize sucrose as working material and synthesize both soluble and insoluble dextran which forms a complex and inhomogeneous polymer network. However, the traditional rheometer has a limitation to capture in situ properties of inherently porous and inhomogeneous biopolymers. Therefore, we used the particle tracking microrheology to characterize the material properties of the dextran polymer. TEM images revealed a range of pore size mostly less than $20{\mu}m$, showing large pores > $2{\mu}m$ and small pores within the solid matrix whose sizes are less than $1{\mu}m$. Microrheology data showed two distinct regimes in the bacterial dextran, purely viscous pore region of soluble dextran and viscoelastic region of the solid part of insoluble dextran matrix. Diffusive beads represented the soluble dextran dissolved in an aqueous phase, of which viscosity was three times higher than the growth medium viscosity. The local properties of the insoluble dextran were extracted from the results of the minimally moving beads embedded in the dextran matrix or trapped in small pores. At high frequency (${\omega}>0.2Hz$), the insoluble dextran showed the elastic behavior with the storage modulus of ~0.1 Pa. As frequency decreased, the insoluble dextran matrix exhibited the viscoelastic behavior with the decreasing storage modulus in the range of ${\sim}0.1-10^{-3}Pa$ and the increasing loss modulus in the range of ${\sim}10^{-4}-1\;Pa$. The obtained results provide a compilation of frequency-dependent rheological or viscoelastic properties of soft gel-like porous biopolymers at the particular conditions where soil bacteria produce bacterial biopolymers in subsurface.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.294-299
• /
• 2013

Solution polymerization was conducted with water-soluble methacrylic acid (MAA) as a monomer and potassium persulfate (KPS) as an initiator at a selected temperature between $70^{\circ}C$ and $90^{\circ}C$. When the ratio between MAA and water was reduced or initiator concentration increased, molecular weights decreased. Molecular weights of poly(methacrylic acid) (PMAA) showed nearly no dependence on reaction temperature. The Weissenberg effect was observed in most polymerization reactions, while its effect weakened at $90^{\circ}C$. The polydispersity index was less than 1.5 in most of the reactions. An increase in the stirring speed produced PMAAs with increasing molecular weights. When the stirring speed reached 800 rpm, we retrieved a monodisperse PMAA with both the number and weight average molecular weights of 791,000 g/mol. The glass transition temperature was found to be $162^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3118-3122
• /
• 2010

The water soluble redox polymer, poly(N-vinylimidazole) complexed with Os(4,4'-dichloro-2,2'-bipyridine)$_2Cl]^+$ (PVI-[Os(dCl-bpy)$_2Cl]^+$), was electrodeposited on the surface of a glassy carbon electrode by applying cycles of alternating square wave potentials between 0.2 V (2 s) and 0.7 V (2 s) to the electrode in a solution containing the redox polymer. The coordinating anionic ligand, $Cl^-$ of the osmium complex, became labile in the reduced state of the complex and was substituted by the imidazole of the PVI chain. The ligand substitution reactions resulted in crosslinking between the PVI chains, which made the redox polymer water insoluble and caused it to be deposited on the electrode surface. The deposited film was still electrically conducting and the continuous electrodeposition of the redox polymer was possible. When cycles of square wave potentials were applied to the electrode in a solution of bilirubin oxidase and the redox polymer, the enzyme was co-electrodeposited with the redox polymer, because the enzymes could be bound to the metal complexes through the ligand exchange reactions. The electrode with the film of the PVI-[Os(dCl-bpy)$_2Cl]^+$ redox polymer and the co-electrodeposited bilirubin oxidase was employed for the reduction of $O_2$ and a large increase of the currents was observed due to the electrocatalytic $O_2$ reduction with a half wave potential at 0.42 V vs. Ag/AgCl.