• Journal of Pharmaceutical Investigation
• /
• v.32 no.4
• /
• pp.267-275
• /
• 2002

A self-microemulsifying drug delivery system (SMEDDS) was developed to increase the dissolution rate, solubility, and ultimately bioavailability of a poorly water soluble drug, lovastatin. SMEDDS was thε mixtures of oils, surfactants, and cosurfactants, which emulsify under conditions of gentle agitation, similar to those which would be encountered in the gastro-intestinal (GI) tract. Various types of self-emulsifying formulations were prepared using four types of oil (Capryol 90, Lauroglycol 90, Labrafil M 1944 CS and Labrafil M 2125), two surfactants (Cremophor EL and Tween 80), and three cosurfactants (Carbitol, PEG 400 and propylene glycol). Thε efficiency of emulsification was studied using a laser diffraction size analyzer to determine particle size distributions of the resultant emulsions. Optimized formulations selected for bioavailability assessment were Carpryol 90 (40%), Cremophor EL (30%) and Carbitol (30%). SMEDDS containing lovastatin (20 mg and 5 mg) were compared to a conventional lovastatin tablet $(Mevacor^{\circledR},\;20\;mg/tab)$ by the oral administration as prefilled hard gelatin capsules to fasted beagle dogs for in vivo study. The arεa under the serum concentration-time curve from time zero to the last measured time in serum, $AUC_{0{\rightarrow}24h}$, was significantly greater in SMEDDS, suggesting that bioavailability increase 130% and 192% by the SMEDDS, respectively. The self-emulsifying formulations of lovastatin afforded the improvement in absolute oral bioavailability relative to previous data of lovastatin tablet formulation. These data indicate the utility of dispersed self-emulsifying formulations for the oral delivery of lovastatin and potentially other poorly absorbed drugs.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.3
• /
• pp.159-163
• /
• 2007

The relationship between texture and rheological properties of mascara(oil-in-water emulsion) was analyzed in this study. The final mascara product and gelling agents(2.0 wt%) used therein, such as hydroxyethylcellulose(HC), carboxymethylcellulose(CMC), hectorite, sodium magnesium silicate (SMS), hydroxyethyl acrylate/sodium acryloyldimethyl taurate copolymer(HS), and polyacrylate 13/polyisobutene/polysorbate 20 (PPP), were measured for rheological properties. As a result, HS and PPP showed the highest adhesiveness which were related to the volumizing effect of mascara. The viscosities of HC, SMS, and HS were measured at the stress range of $1{\sim}1,000s^{-1}$. SMS, with the lowest storage modulus range of $100{\sim}1,000s^{-1}$, affected the mascara in terms of smooth texture. The results of this study suggest that the rheology of gelling agents used influences the final texture of the mascara.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.35-44
• /
• 2006

Recently, encapsulation studies have been tarried out to protect active agents using shell materials such as polymers, lipids, inorganic materials and the other protective materials. We have prepared copolymers of methylmethacrylate (MMA) and trimethoxysilylpropylmethacrylate (TMPMA), and the copolymers as shell materials were used for encapsulating active agents. Poly(MMA-co-TMPMA) spheres were very efficient for encapsulating active agents such as vitamin derivatives (such as retinol, retinyl palmitate, tocopheryl acetate and ascorbyl tetraisopalmitate) and oil soluble licorice extract etc. Mean diameters of poly(MMA-co-TMPMA) core-shell spheres containing active agents varied between about 0.1 to $10{\mu}m$ according to the experimental conditions. The loading amount of encapsulating active agents was 15 to 25% (w/w) and the loading yield was above 90%. The stability of active agents in poly(MMA-co-TMPMA) core-shell spheres prepared with an UV absorbing precursor increased by 25% compared with that of active agents in spheres prepared without an UV absorbing precursor.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.4
• /
• pp.275-288
• /
• 2009

The Korean government strengthened the environmental polices to manage and enhance Metropolitan Area air quality, and also has enforced "Special Act on Seoul Metropolitan Air Quality Improvement (SASMAQI)" issued in Dec. 2004. Recently government expanded the Seoul Metropolitan Air Quality Management District (SMAQMD) to the outskirts satellite cities of Seoul area through the "Revised Law Draft of SASMAQI". The SMAQMD has been alloted the allowable emission loads to the local governments on the basis of the carrying $PM_{10}$ capacity. However, in order to establish the effective air quality control strategy for $PM_{10}$, it is necessary to understand the corresponding sources which have a potential to directly impact ambient $PM_{10}$ concentration. To deal with the situations, many receptor methodologies have been developed to identify the origins of pollutants and to determine the contributions of sources of interests. The objective of this study was to extensively identify $PM_{10}$ sources and to estimate their contributions at the metropolitan area. $PM_{10}$ samples were simultaneously collected at the 3 semi-industrialized local cities in the Seoul metropolitan area such as Hwasung-si, Paju-si, and Icheon-si sites from April 15 to May 31, 2007. The samples collected on the teflon membrane filter by one $PM_{10}$ cyclone sampler were analyzed for trace metals and soluble ions and samples on the quartz fiber filter by another sampler were analyzed for OC and EC. Source apportionment study was then performed by using a positive matrix factorization (PMF) receptor model. A total of 6 sources were identified and their contributions were estimated in each monitoring site. Contribution results on Hwasung, Paju, and Icheon sites were as follows: 33%, 27%, and 27% from soil source, 26%, 26%, and 21% from secondary aerosol source, 11%, 11%, and 12% from biomass burning, 12%, 6%, and 5% from sea salt, 7%, 15%, and 19% from industrial related source, and finally 11%, 15%, and 16% from mobile and oil complex source, respectively. This study provides information on the major sources affecting air quality in the receptor sites and thus it will help to manage the ambient air quality in the metropolitan area by establishing reasonable control strategies, especially for the anthropogenic emission sources.

• Journal of Life Science
• /
• v.21 no.7
• /
• pp.1046-1051
• /
• 2011

Diallyl disulfide (DADS), the most prevalent oil-soluble organosulfur compound in garlic, is known to have diverse biological activities, including anticarcinogenic, antiatherosclerotic, antiinflammatory, and antioxidant actions. In this study, we investigated the effect of DADS on the expression of heme oxygenase-1 (HO-1) in human liver hepatoma cell line HepG2. Treatment of HepG2 cells by DADS evoked a dose-dependent growth inhibition without significant toxicity to the cells, and also induced the expression of transcription factor Nrf2. However, DADS did not have any enhancing effect on transcription and translation of HO-1 expression in HepG2 cells. In addition, DADS efficiently blocked protein synthesis of HO-1 in HepG2 cells stimulated by CoPP or hemin. But, DADS did not decrease the content of transcripts of HO-1 gene stimulated by CoPP, with accumulation of Nrf2 and small Maf in the nucleus. Based on these results, we conclude that DADS inhibits HO-1 expression by modulation of translational level of CoPP or hemin-induced HO-1 expression in HepG2 cells.

• Korean Journal of Food Science and Technology
• /
• v.4 no.4
• /
• pp.285-290
• /
• 1972

Oranges (Citrus unshiu var.) from local orchards at Seogwi, Daejeong, Hanrim, Cheju and Seongsan where are in the southern, southwestern, northwestern, northern and eastern parts of Cheju island respectively were stored in a semi-underground room and an air-circulating refrigerated store. To compare the storage qualities between the growing districts, changes in freshness, acidity and sugar content of oranges were investigated during storage. 1) Oranges from Seogwi and Cheju districts showed remarkably lower Percentage of rot fruits with no relation of storage temperature than those of Hanrim, Daejeong and Seongsan. 2) Browning of oil gland was severe on oranges of northern and southern districts while it was little developed in case of the other districts. 3) Water soluble total sugar content was gradually increased and titratable acidity and reducing sugar content of pulp tissues was decreased during storage. 4) Oranges from the western part showed the higher ratio of sugar content to acidity and better taste as compared with the east oranges.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.505-511
• /
• 2006

We tried to prepare polystyrene composite particles containing carbon black by suspension polymerization with water as a reaction medium. Hydrophobic silica was selected as a stabilizer and oil-soluble azobisisobutyronitrile (AIBN), as an initiator. All polymerization reactions were carried out at a fixed temperature of $75^{\circ}C$. Stabilizer concentration was varied from $0.17{\sim}3.33wt%$ compared to water, where particles with $7.96{\mu}m$ in average diameter were obtained at 1.57 wt% of stabilizer. Increase in divinylbenzene concentration, as a crosslinking agent, from $0.1{\sim}1.0 wt%$ compared to monomer exhibited a large increase in average particle diameter Incorporation of 1wt% of carbon black compared to monomer produced an increase in average diameter It is speculated that viscosity lower than that necessary to induce even dispersion of carbon black particles led to poor dispersion, and as a result, large particles. For a styrene mixture containing 3 wt% carton black compared to monomer, enhanced dispersion due to an increase in carbon black concentration reduced average particle diameters. For styrene mixtures containing 1 and 3 wt% carbon black compared to monomer, preparticles before polymerization and polymer composite particles after polymerization showed a similar tendency towards particle formation. When carbon black concentration compared to monomer was increased to 5 and 7 wt%, styrene mixtures exhibited a large increase in viscosity and thus better dispersion of carbon black particles, which led to a decrease in preparticle diameters. However, these particles experienced agglomeration in the polymerization process, and polystyrene composite particles increased in average diameter.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.394-403
• /
• 1995

Various thermal treatments such as toasting, roasting, drum drying, autoclaving+drum drying, microwaving+drum drying and extrusion were attempted to investigate their effects on chemical composition (proximate composition, Klason lignin, neutral sugar, uronic acid, starch, free sugar, dietary fiber, phytic acid, etc) and functional properties (water solubility index, water absorption index, water holding capacity, oil holding capacity, bulk density, swelling, etc) of wheat bran. Thermal treatments on wheat bran increased soluble dietary fiber (SDF) content from 2.7% (raw sample) to 4.6% (toasted), 4.5% (roasted), 4.6% (drum dried), 5.2% (autoclaved), 3.7% (microwaved), 5.6% (extruded). In contrast, total dietary fiber (TDF) content remained nearly constant regardless of thermal treatments, reflecting the concomitant decrease in insoluble dietary fiber (IDF). It was also found that water holding capacity (WHC) increased $20{\sim}75%$ due to thermal treatments employed in this research. Both bulk density and swelling were not directly relevant to WHC, but thier multiplication exhibited good correlation $(R^2=0.94)$ with WHC. Scanning elctron microscopy (SEM) exhibited that structure of raw wheat bran was significantly modified, whose degree and shape well reflected the types of thermal treatments.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2016

The application of titanium has been gradually rising because the utilizing ranges for low weight and high strength are rapidly increased by the need for improving the fuel economy in production industries such as the aviation and automotive in recent. The purpose in this study is to investigate the appropriate cutting conditions on the life of flat and round end mills by measuring the maximum cutting temperature relative to the machining time, and calculating the wear rates of cutting tool with the spindle speed and feed rate of vertical machining center as a parameter in the titanium roughing cut machining which is widely used in critical parts of aircraft, cars, etc. When the wetted roughing cut machining of titanium with a soluble cutting oil is conducted by the flat and round end mills, the maximum cutting temperatures for a variety of spindle speed and feed rate are measured at ten-minute intervals during 60 minutes by an infrared thermometer, and the wear rates of cutting tool are calculated by the weight ratios based on tool wear before and after the experiment. It is found that the maximum cutting temperature and the wear rates of cutting tool are raised as the cutting amount per tool edge is increased with the rise of feed rate, in this experimental range, and as the frictional area due to the rise of contacting friction numbers between tool and specimen is increased with the rises of cutting time and spindle speed. In addition, the increasing rate of maximum cutting temperature in the flat and round end mills are the highest for the cutting time from 50 to 60 minutes, and the wear rate of cutting tool in the flat end mill is 1.14 to 1.55 times higher than that in the round end mill for all experimental conditions.

• Journal of Nutrition and Health
• /
• v.54 no.5
• /
• pp.448-458
• /
• 2021

Purpose: Mulberry (Morus alba L.) fruit is widely grown in Asia and consumed as fresh fruit, jam, and juices. The fruit has beneficial health effects, including anti-diabetic, anti-tumor, and anti-obesity properties. However, the mechanisms by which mulberry fruit juice powder (MJ) regulates inflammatory microRNAs (miRs) are not yet known. This study investigated the effect of mulberry fruit juice powder on the regulation of inflammation and miR-132/143 during 3T3-L1 adipocyte differentiation. Methods: The 3T3-L1 cells were induced to differentiate for 2 days and then treated with various concentrations of MJ for 7 days. Cytotoxicity was determined by evaluating cell viability using a water-soluble tetrazolium salt-8 assay kit. Intracellular lipid accumulation was evaluated by oil-red O staining. The levels of the expression of genes involved in adipogenesis and inflammation, and miR-132/143 were measured by quantitative real-time polymerase chain reactions. Results: MJ showed no cytotoxic effect on 3T3-L1 adipocytes at concentrations below 100 ng/mL. Intracellular lipid accumulation was reduced by MJ treatment at concentrations of 100 ng/mL. The messenger RNA (mRNA) levels of proliferator-activated receptor-γ, cytosine-cytosine-adenosine-adenosine-thymidine/enhancer-binding protein-α, and adipocyte protein 2, which are involved in adipogenesis, were suppressed by MJ. A reduction was also seen in mRNA levels of genes related to the inflammatory response, such as tumor necrosis factor-α, interleukin-6, monocyte chemoattractant protein-1, and inducible nitric oxide synthase. The expression of the inflammatory miR-132 and miR-143 was also decreased by MJ. Conclusion: These results suggest that MJ may suppress adipogenesis and inflammation through the regulation of miR-132/143 expression in 3T3-L1 adipocytes. Thus, MJ may be useful as a food agent that prevents obesity-associated inflammation.