• 한국세라믹학회지
• /
• 제41권8호
• /
• pp.582-587
• /
• 2004

수산화아파타이트(HAp) 및 P-인산3칼슘($\beta$-TCP)으로 구성되는 2상 인산칼슘염(BCP)을 고상반응법으로 합성하고, 이를 상압 및 autoclave를 이용한 고압에서 수열반응 시킴으로써 응집입자의 미세화를 시도하였다. 이 과정에서 일어나는 결정 상 및 화학조성, 구성상의 상대적인 양, 비표면적, 미세구조의 변화에 미치는 공정조건의 영향을 XRD, FT-IR, 질소흡착에 의한 BET법, SEM을 이용하여 검토하였다.

• 고무기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2012

Click chemistry had enjoyed a wealthy decade after it was introduced by K.B.Sharpless and his co-worker on 2001. Since there is no optimized method for synthesis of click polymer, therefore, this paper introduced three click reaction methods such as catalyst, non-catalyst and azide-end capping for fluorene-based functional click polymers. The obtained polymers have reasonable molecular weight with narrow PDI. The polymers are thermally stable and almost emitted blue light emission. The synthesized fluorene-based functional click polymers were characterized to compare the effect of click reaction methods on polymer electro-optical properties as well as device performance on quasi-solid-state dye sensitized solar cells (DSSCs) applications. The DSSCs with configuration of $SnO_2:F/TiO_2/N719$ dye/quasi-solid-state electrolyte/Pt devices were fabricated using these click polymers as a solid-state electrolyte components. Among the devices, the catalyzed click polymer composed device exhibited a high power conversion efficiency of 4.62% under AM 1.5G illumination ($100mW/cm^2$).These click polymers are promising materials in device application and $Cu^I$-catalyst 1, 3-dipolar cycloaddition click reaction is an efficient synthetic methodology.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.170-174
• /
• 2009

$BaTiO_3$ powder was synthesized by the solid-state reaction of fine $BaTiO_3$ and $TiO_2$ raw materials. Fine grinding media of 50 and 300 microns were used for obtaining fine particulate mixture of $BaTiO_3$ and $TiO_2$ with high homogeneity. Effect of the size of grinding media on the synthesis mechanism of $BaTiO_3$ was discussed on the basis of the particulate morphology and thermogravimetry data for the mixture powders. By using the finer grinding media, $BaTiO_3$ was formed at the lower temperature and the particle size with the relatively narrower distribution could be obtained. $BaTiO_3$ powder with the average size of 100 nm was synthesized by the solid reaction in vacuum atmosphere.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.294-301
• /
• 2019

The quasi-solid-state hybrid electrolytes were synthesized by chemical cross-linking reaction of methacrylate-functionalized $SiO_2$ ($MA-SiO_2$) and tetra (ethylene glycol) diacrylate in aqueous electrolyte. A quasi-solid-state electrolyte synthesized by 6 wt.% $MA-SiO_2$ exhibited a high ionic conductivity of $177mS\;cm^{-1}$ at room temperature. The electrochemical $H_2$ sensor assembled with quasi-solid-state electrolyte showed relatively fast response and high sensitivity for hydrogen gas at ambient temperature, and exhibited better durability and stability than the liquid electrolyte-based sensor. The simple construction of the sensor and its sensing characteristics make the quasi-solid-state hydrogen sensor promising for practical application.

• Corrosion Science and Technology
• /
• 제22권4호
• /
• pp.287-296
• /
• 2023

Li-ion batteries have been gaining increasing importance, driven by the growing utilization of renewable energy and the expansion of electric vehicles. To meet market demands, it is essential to ensure high energy density and battery safety. All-solid-state batteries (ASSBs) have attracted significant attention as a potential solution. Among the advantages, they operate with an ion-conductive solid electrolyte instead of a liquid electrolyte therefore significantly reducing the risk of fire. In addition, by using high-capacity alternative electrode materials, ASSBs offer a promising opportunity to enhance energy density, making them highly desirable in the automotive and secondary battery industries. In ASSBs, Li metal can be used as the anode, providing a high theoretical capacity (3860 mAh/g). However, challenges related to the high interfacial resistance between Li metal and solid electrolytes and those concerning material degradation during charge-discharge cycles need to be addressed for the successful commercialization of ASSBs. This review introduces and discusses the interfacial reactions between Li metal and solid electrolytes, along with research cases aiming to improve these interactions. Additionally, future development directions in this field are explored.

• 공업화학
• /
• 제10권5호
• /
• pp.772-777
• /
• 1999

$Y_2Ba_1Cu_1O_5(Y211)$ 분말은 출발물질로서 $Y_2O_3(99.9%)$, $BaCO_3(99.9%)$, and CuO(99.9%) 분말을 사용하여 고상반응법과 발화합성법을 이용하여 제조하였다. $Y_2Ba_1Cu_1O_5(Y211)$ 분말에 대한 상형성과 반응속도는 열처리 온도와 반응시간에 따른 시료들을 X-선 회절분석을 이용하여 연구하였다. X-선 회절선으로부터 측정된 전화율($X_{211}$)과 반응특성으로부터 상 형성속도가 분말의 입자크기에 의해 지배되는 것을 알 수 있었다. 그리고 발화합성법으로 제조된 Y211상의 활성화에너지(${\Delta}E_a$)는 고상반응법에 의해 제조된 것의 149.46 kJ/mol과 비교할 때 136.42 kJ/mol을 나타내었다. $Y_2Ba_1Cu_1O_5$계에서의 활성화에너지 값은 발화합성법이 고상반응법보다 더욱 효율적인 방법임을 보였다.

• 공학논문집
• /
• 제3권1호
• /
• pp.223-233
• /
• 1998

고상반응식을 이용한 석회와 석영과의 수열반응속도 및 반응메카니즘에 관하여 연구하였다. 출발물질로 석영과 수산화칼슘 CaO/$SiO_2$몰비 0.8-1.0로 혼합하고 $180-200^{\circ}C$, 0.5-8시간동안 포화증기압하에서 오토클레이브로 수열반응을 행하였다. 수열반응속도는 총 석회의 양과 총 석영의 양에 대한 미반응 석회의 양과 미반응 석영의 양의 비로 구하였다. 반응속도는 Jander의 식 $[1-(1-\alpha)^{1/3}]^N=Kt$를 이용하여 얻은 결과, 석회의 반응속도는 N=1로서 주로 용해속도에 의해 지배되고 석영의 반응속도는 $N\risingdotseq2$로서 확산에 의해 주로 지배된다. 규산칼슘수화물계의 수열반응속도는 반응물 입자주위에 형성된 생성물층을 통한 물질전달에 의해 율속되는 것으로 추정되고 전체 수열반응의 속도식은 대략 $N=1-2$로서 경계층으로부터 확산에 의해 율속과정으로 전환된다.

• The Korean Journal of Ceramics
• /
• 제2권1호
• /
• pp.25-32
• /
• 1996

Solid electroyte nasion was synthesized by the optimized solid state reaction minimizing the volume fraction of secondary $ZrO_2$ and glassy phases. To compensate for the evaporation of Na and P during heat-treatment, excess Na and P were added to the starting composition $Na_{1+x} Zr_2 Si_x P_{d-x} O_{12}$ (x=2.1). Phases pure nasicon comparable in volume fraction to the one obtaied from sol-gel process were synthesized after the reaction at $1100~1150^{\circ}C$,$ P_{O2}>=0.1-0.15 $$ZrO_2$ increased with the heat-treatment time due to the decomposition of nasicon phase and that of glassy phase increased as partial oxygen pressure decreased. The synthesized nasion showed a good electrical conductivity of $-1{\times}10^{-2}({\omega}{\cdot}cm)^{-1}$ at $350^{\circ}C$.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.112-118
• /
• 2008

Residual solid in excess sludge treated by hydrothermal reaction was investigated as raw material for its recycling. Treated excess sludge and residual solid were also focused on their content change during hydrothermal reaction. Two kinds of excess sludge, obtained from a local food factory and a municipal wastewater treatment process, were tested under various conditions. Following hydrothermal reaction, depending on the reaction conditions, biodegradable substrates in treated excess sludge appeared to increase. The separated residual solid was a composite composed of organic and inorganic materials. The proportion of carbon varied from 34.0 to 41.6% depending on reaction conditions. Although 1.89% of hazardous materials were detected, SiO2 (Quartz) was a predominant constituent of the residual solid. X-ray diffraction (XRD) experiments revealed that the residual solid was of a partially amorphous state, suggesting that the residual solids could be easily converted to stable and non harmful substances through a stabilization process. Thus, this technology could be successfully used to control excess sludge and its reuse.

• 한국분말재료학회지
• /
• 제19권4호
• /
• pp.310-316
• /
• 2012

Nanocrystalline $BaTiO_3$ powder could be synthesized by solid-state reaction using the mixture which was prepared by a high energy milling process in a bead mill for $BaCO_3$ and nanocrystalline $TiO_2$ powders mixture. Effect of the milling time on the powder characteristic of the synthesized $BaTiO_3$ powder was investigated. Nanocrystalline $BaTiO_3$ with a particle size of 50 nm was obtained at $800^{\circ}C$. High tetragonal $BaTiO_3$ powder with a tetragonality(=c/a) of 1.009 and a specific surface area of $7.6m^2/g$ was acquired after heat-treatment at $950^{\circ}C$ for 2 h. High energy ball milling was effective in decreasing the reaction temperature and increasing the tetragonality.