• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6325-6332
• /
• 2015

Although distortions of horizontally curved box girder are more susceptible than which of the straight girder due to curvature effect, current domestic design standards does not present spacing of intermediate diaphragms for the curved box girder. In this study, parametric studies for straight and curved box girder considering distortional warping normal stresses based on linear finite element analysis were carried out. Single span curved girders were chosen for analysis based on current domestic bridge data with 1-6 of solid intermediate diaphragms, 0-30 degree of subtended angle, 30m and 60m of span length and 2-3m of flange width and web height. The adequate spacing of diaphragms for the box girder were suggested considering subtended angles and bending and distortional warping normal stress ratios with 5%, 10%, 15% and 20%. The analysis results were also compared to a current design standard and suggested spacing of diaphragm were evaluated.

• Plant Biotechnology Reports
• /
• v.3 no.3
• /
• pp.175-182
• /
• 2009

Simple, reproducible, high frequency, improved plant regeneration protocol in Eastern Cottonwood (Populus deltoides) clones, WIMCO199 and L34, has been reported. Initially, aseptic cultures established from axillary buds of nodal segments from mature plus trees on MS liquid medium supplemented with $0.25mg\;1^{-1}$ KIN and $0.25mg\;1^{-1}$ IAA. Nodal and internodal segments were found to be extra-prolific over shoot apices during course of aseptic culture establishment, while $0.25mg\;1^{-1}$ KIN concentration played a stimulatory role in high frequency plant regeneration. Diverse explants, such as various leaf segments, internodes, and roots from in vitro raised cultures, were employed. Direct plant regeneration was at high frequency of 92% in internodes, 88% in leaf segments, and 43% in root segments. This led to the formation of multiple shoot clusters on established culture media with rapid proliferation rates. Many-fold enhanced shoot elongation and growth of the clusters could be achieved on liquid MS medium supplemented with borosilicate glass beads, which offer physical support for proliferating shoots leading to faster growth in comparison to semi-solid agar or direct liquid medium. SEM examination of initial cultures confirmed direct plant regeneration events without intervening calli. In vitro regenerated plants induced roots on half-strength MS medium with $0.15mg\;1^{-1}$ IAA. Rooted 5- to 6-week-old in vitro regenerated plants were transferred into a transgenic greenhouse in pots containing 1:1 mixture of vermicompost and soil at $27{\pm}2^{\circ}C$ for hardening and acclimatization. 14- to 15-week-old well-established hardened plants were transplanted to the field and grown to maturity. The mature in vitro raised poplar trees exhibited a high survival rate of 85%; 4-year-old healthy trees attained an average height of 8 m and an average trunk diameter of 25 cm and have performed well under field conditions. The regeneration protocol presented here will be very useful for undertaking genetic manipulation, providing a value addition to Eastern Cottonwood propagation in future.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.657-665
• /
• 2014

This study was carried out to study the effect of eggplant (EG203) grafting and strawberry removal time on succeeding tomato cropping in high temperature season. In non tillage culture, bacterial wilt incidence was 30% and 0% in nongrafting and eggplant (EG203) grafting while 25% in non-grafting and 0% in eggplant (EG203) grafting in tillage culture. Commercial yield was similar in tillage and non-tillage culture using EG-203 grafting as 2,693 kg/10a and 2,657 kg/10a respectively with no difference in soluble solid content and hardness. Strawberry removal time after tomato planting enhanced plant height and internode length in 20days and 30days later removal while no difference in other growth characters. Commercial yield was higher as 1,885 kg/10a in strawberry removal before tomato planting than 1,678 kg/10a in 30days later removal. From this research, strawberry removal time should be determined by considering strawberry price and growth and expecting profit by succeeding tomato cropping.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.12-21
• /
• 2011

We investigated the location and surveillance system of fortress using inter-visibility analysis between fortress and the capital of the Silla Dynasty. The digital terrain model(DTM) was generated with $10{\times}10m$ grid in Arcview 3.2. Then three fortresses lines(Myeonghwal-sanseong, Namsan-shinseong, Seohyeong-sanseong) were superimposed on the DTM. 4 results of this study were drew out from the cumulative visibility analysis. First, the most of fortress lines which showed the high visible frequency from the Sila-Capital(538 viewpoints) have a good aspect toward the capital. It means that 3 fortresses secured the visibility to the capital. Second, the cumulative visibility analysis from 3 fortresses generated evenly distributed visible frequency across the inside of fortress. It shows that the inner area of fortress is more advantageous to command during the war. On the contrary, a number of invisible(vulnerable) regions which is scattered on the outside were supplemented by adjacent fortress. Third, the north area of the Sila-captial showed the highest visible frequency generated by sum up the visibility from 3 fortresses. The northern captial is placed within 4km distance easy to support at the Myeonghwal and Seohyeong-sanseong. We proved that the Sila-capital had organized a solid surveillance system by 3 fortresses. Fourth, we could infer the practical process of fortress layout from comparing a cumulative visibility map. For the secure of visibility and defense systems, the fortress line would form a rising shape to the peak. This practical location theory can replace the vague common location theory that the fortress would constructed on two thirds of mountain height. It will be an empirical method in the ancient remains research.

• Korean Journal of Organic Agriculture
• /
• v.32 no.1
• /
• pp.75-90
• /
• 2024

Biochar is a solid substance with a high carbon content, as it is made out of biomass pyrolyzed under the condition of limited oxygen. This product has attracted attention as an environment-friendly soil amendment because it contributes to carbon neutrally and has improvement effects on the soil environment. This study conducted an experiment to evaluate soil physiochemical properties and microbial community changes in a melon greenhouse according to the applied amount of biochar to investigate the growth characteristics and yields of melons accordingly. In soil physical properties, an increase in the applied amount of biochar resulted in a decrease in bulk density and an increase in porosity of the soil, improving air permeability. In soil chemical properties, an increase in the applied amount of biochar led to a increasing of pH, organic matter and available phosphate content. In the growth characteristics of melons, there was a growing tendency of plant height, leaf length and leaf width according to the increasing application of biochar until 10,000 kg/ha. Moreover, melon yields also increased as the amount of biochar, 13~16% higher in 10,000 kg/ha biochar application than no treatment. Compared differences among microbial communities in the soil according to the application of biochar and found that plant beneficial bacteria dominated in biochar treatments. This study demonstrated the potential of biochar as an effective soil amendment in melon greenhouse by showing improvements in soil physicochemical properties and microbial communities.

• Explosives and Blasting
• /
• v.42 no.3
• /
• pp.38-48
• /
• 2024

This study is to evaluate the applicability of high-speed, high-pressure dynamic compression technology for the powder molding of talc. To achieve this, powder molding test was conducted using a self-developed high-speed, high-pressure dynamic compression device, and the results were analyzed. Additionally, the behavior characteristics of pyrophyllite powder particles under dynamic compression were analyzed using the PFC2D. Quantitative analyses, as well as mapping and point analyses, were conducted using the SEM on pyrophyllite from the Naju ceramic Mine and the Bugok mine. The results showed that the weight ratio of composed elements in both mines was in the order of oxygen > silicon > aluminum. A pyrophyllite powder solid with a diameter of 14.5 mm and a thickness of 3 mm was successfully produced using a high-speed, high-pressure dynamic compression device capable of generating an instantaneous compressive force with a 30 kgf projectile dropped from a height of 1.5 m in about 0.4 seconds. Numerical analysis of pyrophyllite powder using PFC2D analyzed that in the numerical model, the compression ratio was approximately 56%, and the porosity decreased from 16.0% to 1.0%, indicating almost no remaining pores.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.25-31
• /
• 2012

This study aimed to investigate the effect of night temperature on the productivity, growth, and fruit characteristics of tomatoes and set the optimal night air temperature. Tomatoes (Solanum lycopersicum Mill. cv. Superdoterang and cv. Rapito) were grown at 5, 10, 15, and $20^{\circ}C$ during night time and ventilation temperature point during day time set $27^{\circ}C$. Depending on night air temperature, plant height, leaf area, fresh and dry weight of each organ, leaf, stem, and root were changed. Condition of high night temperature resulted in promotion of tomatoes growth with high dry weight and fresh weight. However, the dry weight under night temperature $20^{\circ}C$ decreased, especially, in 'Superdoterang'. On changes of yield, 'Rapito' showed higher productivity than 'Superdoterang' and the highest productivity point for nigh temperature is $13.32^{\circ}C$ for 'Superdoterang' and $14.25^{\circ}C$ for 'Rapito'. Although the total yield decreased from the point, the daily productivity increased with increasing night temperature, the highest point for nigh temperature is $14.45^{\circ}C$ for 'Superdoterang' and $16.46^{\circ}C$ for 'Rapito'. High temperature deceased the fruit weight and increased total soluble solid content in fruits. It is concluded that the night air temperature changes productivity of tomato and the temperatures between productivity and growth velocity have differences depending on different cultivars. scores than the other beef jerky samples (p<0.05).

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.288-292
• /
• 2008

This study was conducted to identify the effects of irrigation amount to produce high quality melon fruit in fertigation culture. Irrigation amount of during fruit harvesting period was doubled at the low irrigation point ($(-45{\sim}50\;kPa$) treatment as 115 mm as than that of the high irrigation point ($-20{\sim}25\;kPa$) treatment. The plant growth rates such as stem length, leaf weight and plant height were a little diminished at the low irrigation point ($-45{\sim}50\;kPa$) than those of the other treatments. Internode length was however not affected by irrigation amount. Fruit weight was lighter at the low irrigation point ($-45{\sim}50\;kPa$) than that of at the high irrigation point and fruit height was shorter, but fruit diameter was not affected by irrigation amount. Fruit soluble solid was $0.9^{\circ}Bx$ higher at the low irrigation point ($-45{\sim}50\;kPa$) than at the high irrigation point ($-20{\sim}25\;kPa$) and net index was higher. Total marketable yield was highest by 3,937 kg/10a at the high irrigation point ($-20{\sim}25\;kPa$), but the excellent marketable yield was highest by 2,531 kg/10a at the low irrigation point ($-45{\sim}50\;kPa$). Inorganic contents of the soil N, K, Ca and Mg were not affected by irrigation amount. It was therefore thought that optimum irrigation point to produce high quality melon fruit by fertigation culture was $-45{\sim}50\;kPa$ at ripening stage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.4
• /
• pp.12-23
• /
• 2019

This study was carried out to investigate and analyze the environmental characteristics of restoration areas in the riparian zones of the Han River, and to quantify the amount of topsoil organic carbon storage. As a result of investigation and analysis of 21 survey sites, the total number of species planted was found to be 17, and the mean number of species was $2.86{\pm}0.13$ species per site. At least one species and a maximum of 7 species were planted at each site. The mean diameter at breast height was $9.1{\pm}0.6cm$, the mean height was $6.2{\pm}0.3m$ and the root content in soil was $0.13{\pm}0.18g/cm^2$. As a result of the analysis of the soil characteristics, 6 out of 21 items, such as the bulk density, solid ratio, gravel ratio, soil hardness, sand content, and pH increased as the soil layer deepened. The topsoil organic carbon storage by layer was $11.54{\pm}1.08ton/ha$ at 0-10cm, $8.69{\pm}0.81ton/ha$ at 10-20cm, $7.97{\pm}0.79ton/ha$ at 20-30cm, and the total from 0 to 30cm was $28.21{\pm}7.31ton/ha$. The highest amount of topsoil organic carbon storage by land use in the past was $35.17{\pm}5.31ton/ha$ in agricultural lands, followed by $28.16{\pm}8.31ton/ha$ in residential areas, $21.87{\pm}9.05ton/ha$ in commercial areas, $19.23{\pm}12.48ton/ha$ in industrial areas, and $17.07{\pm}11.33ton/ha$ in the barren areas. The highest amount of topsoil organic carbon storage in the restored areas was $38.46{\pm}3.14ton/ha$ in 2006, followed by $28.57{\pm}7.84ton/ha$ in 2016, and $16.78{\pm}6.06ton/ha$ in 2011. The results of this study are expected to provide a basic database and evaluation criteria for enhancing the carbon abatement effects of the restoration sites in riparian zones in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.111-119
• /
• 2018

This study was carried out to investigate the growth characteristics and propagation methods of the Korean native Amelanchier asiatica, A. arborea, and A. alnifolia as fruit trees for gardens. Due to the lack of recent research on Amelanchier spp., their superficial classification is still unclear and the names are being used interchangeably. The results are obtained as follows : A. arborea and A. alnifolia were globular type multi-stemmed shrubs. A 20-year-old tree of A. asiatica was 7.8m in height, with a 5.2m crown width, with one trunk. As for the morphological characteristics, leaves of A. asiatica were oblong, with an acuminate of, 6.1cm and 3.6cm width, but A. arborea and A. alnifolia had acute obovate leaves. The leaf size of A. alnifolia was the largest among the three species. The flower size of A. asiatica was bigger than that of A. arborea and A. alnifolia. In addition, its petals and flower clusters were also the largest among the three species. The flowering of A. asiatica initiated on April 21 and then bloomed for a duration of 24 days in Osan, while that of A. arborea and A. alnifolia initiated flowering on April 12 and then bloomed for a duration of 22 days in the same location. The fruit of A. arborea and A. alnifolia were green on May 10~12, it changed into purplish red on May 24~26, and its matured on June 1~3. The duration of fruit persistence of A. arborea and A. alnifolia were 48~50 days. On the other hand, A. asiatica showed greenish fruit on May 20, it became red on September 4, and had fallen by October 3. The fruit size was the largest at 1.03cm of height and 1.12cm of diameter in the A. arborea, followed by the big berry of A. alnifolia and the smallest fruit in the native, A. asiatica. It was difficult to root due to the hardwood cutting of A. arborea at a 40% rate of rooting. In the softwood cutting, the rooting rate of A. arborea was increased by the treatment with concentrated IBA, especially at 5,000 and 7,000ppm. The optimum date for cutting was on June 27, when the rooting rate was more than 80%. The most effective method for rooting of A. arborea was rootone or 7,000 ppm IBA treatment on June 27 softwood cuttings, which showed a rooting rate of over 80%.