• 제목/요약/키워드: Solar Chemistry

검색결과 376건 처리시간 0.025초

3-5족 적층형과 CuInGa(S,Se)2 및 Cu2ZnSn(S,Se)4 화합물반도체 박막태양전지 (III-V Tandem, CuInGa(S,Se)2, and Cu2ZnSn(S,Se)4 Compound Semiconductor Thin Film Solar Cells)

  • 정연길;박동원;이재광;이재영
    • 공업화학
    • /
    • 제26권5호
    • /
    • pp.526-532
    • /
    • 2015
  • 신 기후변화대응(Post 2020)을 위한 대체에너지의 역할과 더불어 태양전지의 중요성이 높아져 가고 있다. 태양전지의 종류는 크게 재료관점에서 보면 유기물과 무기물 계열로 구분할 수 있지만 대규모 발전역할에서는 현재까지 실리콘과 같이 양산성과 안정성 기반의 무기물 태양전지가 주된 역할을 하고 있다. 특히 최근 몇 년간 화합물반도체 태양전지에 대한 연구는 급속도로 가속화되면서 3-5족 적층형 태양전지, chalcopyrite 계열 $CuInGa(S,Se)_2$ (CIGSSe) 태양전지와 kesterite 계열 $Cu_2ZnSn(S,Se)_4$ (CZTSSe) 태양전지 연구가 대표적으로 주류를 이루어 왔다. 따라서 화합물반도체 태양전지에서 주류를 이루고 있는 3-5족 적층형, CIGSSe 및 CZTSSe 태양전지들의 연구개발동향 및 기술적인 주요내용들에 대해 소개하고자 한다.

Influence of Lithium Ions on the Ion-coordinating Ruthenium Sensitizers for Nanocrystalline Dye-sensitized Solar Cells

  • Cho, Na-Ra;Lee, Chi-Woo;Cho, Dae-Won;Kang, Sang-Ook;Ko, Jae-Jung;Nazeeruddin, Mohammad K.
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권spc8호
    • /
    • pp.3031-3038
    • /
    • 2011
  • Ion-coordinating ruthenium complexes [cis-Ru(dcbpy)(L)(NCS)$_2$, where dcbpy is 4,4'-dicarboxylic acid-2,2'-bipyridine and L is 1,4,7,10-tetraoxa-13-azacyclopentadecane, JK-121, or bis(2-(2-methoxy-ethoxy)ethyl) amine, JK-122] have been synthesized and characterized using $^1H$ NMR, Fourier transform IR, UV/vis spectroscopy, and cyclic voltammetry. The effect of $Li^+$ in the electrolyte on the photovoltaic performance was investigated. With the stepwise addition of $Li^+$ to a liquid electrolyte, the device shows significant increase in the photo-current density, but a small decrease in the open circuit voltage. The solar cell with a hole conductor, the addition of $Li^+$ resulted in a 30% improvement in efficiency. The JK-121 sensitized cells in the liquid and solid-state electrolyte give power conversion efficiencies of 6.95% and 2.59%, respectively, under the simulated sunlight.

Synthesis and Application of New Ru(II) Complexes for Dye-Sensitized Nanocrystalline TiO2 Solar Cells

  • Seok, Won-K.;Gupta, A.K.;Roh, Seung-Jae;Lee, Won-Joo;Han, Sung-Hwan
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권8호
    • /
    • pp.1311-1316
    • /
    • 2007
  • To develop photo-sensitizers for dye-sensitized solar cells (DSCs) used in harvesting sunlight and transferring solar energy into electricity, we synthesize novel Ru(II) polypyridyl dyes and describe their characterization. We also investigate the photo-electrochemical properties of DSCs using these sensitizers. New dyes contain chromophore unit of dafo (4,5-diazafluoren-9-one) or phen-dione (1,10-phenanthroline-5,6-dione) instead of the nonchromophoric donor unit of thiocyanato ligand in cis-[RuII(dcbpy)2(NCS)2] (dcbpy = 4,4'-dicarboxy- 2,2'-bipyridine) coded as N3 dye. For example, the photovoltaic data of DSCs using [RuII(dcbpy)2(dafo)](CN)2 as a sensitizer show 6.85 mA/cm2, 0.70 V, 0.58 and 2.82% in short-circuit current (Jsc ), open-circuit voltage (Voc), fill factor (FF) and power conversion efficiency (Eff), which can be compared with those of 7.90 mA/ cm2, 0.70 V, 0.53 and 3.03% for N3 dye. With the same chelating ligand directly bonded to the Ru metal in the complex, the CN ligand increases the Jsc value by double, compared to the SCN ligand. The extra binding ability in these new dyes makes them more resistant against ligand loss and photo-induced isomerization within octahedral geometry.

Double Textured AZO Film and Glass Substrate by Wet Etching Method for Solar Cell Application

  • 정원석;남상훈;부진효
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.594-594
    • /
    • 2012
  • Al doped ZnO (AZO) thin films were deposited on textured glass substrate by magnetron sputtering method. Also, AZO films on textured glass were etched by hydrochloric acid (HCl). Average thickness of etched AZO films are 90 nm. We observed morphology of AZO film by AFM with various etchant concentration and etching time. Etched AZO films have low resistivity and high haze. The surface RMS roughness of AZO film was increased from 53.8 nm to 84.5 nm. The haze ratio was also enhanced in above 700 nm of wavelength due to light trapping effect was increased by rough AZO surface. The etched AZO films on textured glass are applicable to fabricate solar cell.

  • PDF

PEDOT:PSS Thin Films with Different Pattern Structures Prepared Using Colloidal Template

  • Yu, Jung-Hoon;Lee, Jin-Su;Nam, Sang-Hun;Boo, Jin-Hyo
    • Applied Science and Convergence Technology
    • /
    • 제23권5호
    • /
    • pp.254-260
    • /
    • 2014
  • Organic solar cells have attracted extensive attention as a promising approach for cost-effective photovoltaic devices. However, organic solar cell has disadvantage of low power conversion efficiency in comparison with other type of solar cell, due to the recombination ratio of hole and electron is too large in the active layer. Thus we have change the surface structure of PEDOT:PSS layers to improve the current density by colloidal lithography method using various-size of polystyrene sphere. The two types of coating method were applied to fabricate the different pattern shape and height, such as spin coating and drop casting. Using the organic solvent, we easily eliminate the PS sphere and could make the varied pattern shapes by controlling the wet etching time. Also we have measured the electrical properties of patterned PEDOT:PSS film to check whether it is suitable for organic photovoltaics.

Synthesis and Applications of Dicationic Iodide Materials for Dye-Sensitized Solar Cells

  • Nam, Heejin;Ko, Yohan;Kunnan, Sakeerali C.;Choi, Nam-Soon;Jun, Yongseok
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권2호
    • /
    • pp.214-222
    • /
    • 2019
  • Dye-sensitized solar cells (DSSCs) have been receiving growing attentions as a potential alternative to order photovoltaic devices due to their high efficiency and low manufacturing cost. DSSCs are composed of a photosensitizing dye adsorbed on a mesoporous film of nanocrystalline $TiO_2$ as a photoelectrode, an electrolyte containing triiodide/iodide redox couple, and a platinized counter electrode. To improve photovoltaic properties of DSSCs, new dicationic salts based on ionic liquids were synthesized. Quite comparable efficiencies were obtained from electrolytes with new dicationic iodide salts. The best cell performance of 7.96% was obtained with dicationic salt of PBDMIDI.

태양열 발전에 대한 IEA의 활동 및 전망 (Activities and Outlook of IEA about Concentrated Solar Power)

  • 이현진;김종규;강용혁
    • 융복합기술연구소 논문집
    • /
    • 제2권1호
    • /
    • pp.13-17
    • /
    • 2012
  • 1) 국제에너지위원회 IEA 산하 SolarPACES(Solar Thermal Power and Chemistry Energy System)는 태양열발전 및 화학 관련한 기술 개발 및 보급을 목표로 한국을 포함하여 현재 20개국이 활동 중이다. 2011년 우리나라는 집행위원회뿐만 아니라 6개 기술 분야 중에 태양열발전, 태양열화학, 태양열집광기술 및 적용 3개 분야에 참여하고 있다. 2) 2011년 기준으로 약 1.2GW 용량의 태양열 발전소가 전 세계에 설치되었고, 스페인 582MW, 미국 507MW로 대부분을 차지한다. 현재 미국 8GW, 스페인 4.46GW, 중국 2.5GW를 포함하여 전체 약 17GW 용량 발전소들이 건설 또는 계획 중에 있다. 3) 국제에너지위원회 IEA는 태양열 발전소는 태양광에 비해 약 1/3정도의 발전 용량을 갖겠지만, 열저장을 이용한 높은 가동시간을 바탕으로 2050년에는 태양광이나 바이오매스와 비슷한 수준으로 전기를 공급하여 전 세계 전기의 11.3% 정도에 이를 것으로 예측하고 있다.

  • PDF

Synthesis and Characterization of Phenanthrene-substituted Fullerene Derivatives as Electron Acceptors for P3HT-based Polymer Solar Cells

  • Mi, Dongbo;Park, Jong Baek;Xu, Fei;Kim, Hee Un;Kim, Ji-Hoon;Hwang, Do-Hoon
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권6호
    • /
    • pp.1647-1653
    • /
    • 2014
  • 9,10-Bis(bromomethyl)phenanthrene reacted with fullerenes via a Diels-Alder reaction to give phenanthrene-substituted fullerene mono-adducts (PCMA) and bis-adducts (PCBA) as electron acceptors for organic photovoltaic cells (OPVs). The syntheses of the fullerene derivatives were confirmed by $^1H$ $^{13}C$ NMR spectroscopy and MALDI-TOF mass spectrometry. PCMA and PCBA showed better light absorption in the UV-visible region than $PC_{61}BM$. Their electrochemical properties were measured using cyclic voltammetry. Accordingly, the lowest unoccupied molecular orbital (LUMO) energy levels of PCMA and PCBA were -3.66 and -3.57 eV, respectively. Photovoltaic cells were fabricated with a ITO/PEDOT:PSS/poly(3-hexylthiophene)(P3HT):acceptor/LiF/Al configuration, where P3HT and PCBA are the electron donors and acceptors, respectively. The polymer solar cell fabricated using the P3HT:PCBA active layer showed a maximum power conversion efficiency of 0.71%.