• 제목/요약/키워드: Sol coating

검색결과 716건 처리시간 0.029초

콜로이드 실리카 실란을 함유한 졸겔반응 코팅제 특성연구 (Properties of Sol-Gel Materials Containing Colloidal Silica Silane)

  • 강동필;안명상;나문경;명인혜;강영택
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 춘계학술대회 논문집
    • /
    • pp.33-36
    • /
    • 2005
  • Colloidal Silica(CS)/silane sol solutions were prepared in variation with synthesizing parameters such as ratio of CS to silane and reaction time. In the case of LHSA CS/tetramethoxysilane(TMOS)/methyltrimethoxysilane(MTMS) CS/silane sol, coating film had stable contact angle with increasing reaction time excepting for 48hours. Also, the LHSA CS/TMOS/MTMS coating film had more enhanced flat surface with increasing the amount of MTMS and increasing reaction time. In the case of thermal stability, thermal dissociation of LHSA CS/MTMS sol did not occur up to $550^{\circ}C$.

  • PDF

폴리카보네이트 판 위에 Silicates와 Melamine 유도체의 졸-겔 반응을 이용한 하드 코팅 (Hard Coatings on Polycarbonate Plate by Sol-Gel Reactions of Silicates and Melamine Derivative)

  • 김세라;강민경;신영재;오미혜;윤여성;신재섭
    • 폴리머
    • /
    • 제31권6호
    • /
    • pp.485-490
    • /
    • 2007
  • 자동차의 유리를 폴리카보네이트로 대체하기 위하여 폴리카보네이트 판 위에 멜라민 유도체와 실리케이트를 이용하여 졸-겔 과정으로 하드 코팅을 시도하였다. 본 연구에서는 methylated poly(melamine-co-formaldehyde), tetraethoxysilane, phenyltriethoxysilane 등으로부터 졸-겔 과정으로 코팅을 형성하였다. 코팅을 실시하기 전에 코팅의 접착력을 향상시키기 위하여 poly(methyl methacrylate)를 사용하여 폴리카보네이트판 위에 전처리 코팅을 하였다. 가장 우수한 코팅 물성을 나타내는 코팅의 최적 조건을 찾아보았다. 멜라민 유도체를 첨가하였을 때 연필 경도가 증가하였다. 형성된 코팅은 연필 경도 3H의 경도를 나타내었으며, 매우 고른 코팅 표면을 갖고 있었고, 매우 우수한 내마모성을 나타내었다.

정수처리용 TiO2 고정화 촉매 비교 (Comparision of Immobilized TiO2 Catalyst for Water Purification)

  • 전은주;강성환;김병욱;임재명
    • 상하수도학회지
    • /
    • 제13권3호
    • /
    • pp.101-106
    • /
    • 1999
  • This research aims to compare immobilized catalysts prepared by various methods and determine suitable $TiO_2$ catalyst for water purification. Sol-gel method by Anderson and powder coation method by Tanaka ate famous in the methods to immobilize catalyst. Therefore, the $TiO_2$ catalyst for this research was prepared by sol-gel method and powder coating method. Its structure was tested by X-ray diffractometer (XRD), Scanning electron microseope (SEM). Durability of a catalyst-support couple in an solution was investigated. too. Experimental results were summarized as following; i) Optimum ratio of Ti : $H_2O$ : $H^+$ to obtain stable sol was 1 : 10 : 0.1 and the XRD patterns of $TiO_2$ film immobilized by sol-gel method which were fired at $700^{\circ}C$ showed that the catalyst had an anatase structure. ii) The particle size of $TiO_2$ prepared by sol-gel method was less than $5{\mu}$, but it was observed that coated side was not unifiom. iii) Sol-gel method was very effective to obtain $TiO_2$ catalyst of thin film, but spreadability and durability of a catalyst-support couple in a solution were than $TiO_2$ film immobilized by powder coating method. iv) The particle size of $TiO_2$ immobilized by powder coating method was a little larger than it prepared by sol-gel method, but spreadability and uniformity of $TiO_2$ film and durability of a catalyst-support couple in a solution were better than it immobilized by sol-gel method.

  • PDF

Characterization of F- and Al-codoped ZnO Transparent Conducting Thin Film prepared by Sol-Gel Spin Coating Method

  • Nam, Gil Mo;Kwon, Myoung Seok
    • 한국세라믹학회지
    • /
    • 제53권3호
    • /
    • pp.338-342
    • /
    • 2016
  • ZnO thin film co-doped with F and Al was prepared on a glass substrate via simple non-alkoxide sol-gel spin coating. For a fixed F concentration, the addition of Al co-dopant was shown to reduce the resistivity mainly due to an increase in electrical carrier density compared with ZnO doped with F only, especially after the second post-heat-treatment in a reducing environment. There was no effective positive contribution to the reduction in resistivity due to the mobility enhancement by the addition of Al co-dopant. Optical transmittance of the ZnO thin film co-doped with F and Al in the visible light domain was shown to be higher than that of the ZnO thin film doped with F only.

Sol-gel dip-Coating법에 의한 $WO_3$ 박막 제조 (Fabrication of $WO_3$ thin film by sol-gel dip-coating method)

  • 김창열;김병섭;임태영;오근호
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.189-189
    • /
    • 2003
  • WO$_3$ 박막은 H$^{+}$이온이나 Li$^{+}$ 이온과 반응하여 H$_2$WO$_4$나 Li$_{x}$WO$_{3+x}$의 화합물을 이루고 파란색을 나타내는 효과를 보인다. 이러한 효과를 전기변색 (electrochromic) 효과라 한다. 이러한 전기변색효과를 이용하여 건축물의 창문을 통하여 들어오는 태양에너지와 빛의 양을 조절하는 윈도우를 제작하려는 국가적인 프로젝트가 미국, EU, 일본 등의 선진국에서 활발하게 진행되고 있다. WO$_3$ 박막을 제조하는 방법으로는 sputtering, CVD, 그리고 sol-gel coating 법 등이 있다. sputtering이나 CVD의 경우는 매우 균일하고 전기변색 특성이 좋은 박막을 제조할 수 있는 이점이 있지만 장치의 제조비가 비싸고 대형 패널을 제작하는 데에는 어려움이 있다. 솔-젤 코팅의 경우는 WO$_3$의 전구체인 솔을 합성하고 bath에 솔을 넣은 후 코팅하고자 하는 글라스 기판을 담갔다가 꺼내어 건조하고 열처리하는 간단한 방법으로 제조할 수 있는 장점이 있다. 솔-젤 코팅의 경우 제조비가 값싸고 대면적 코팅이 용이하다는 점이 다른 코팅 방법에 비하여 장점이라고 한 수 있다.다.다.

  • PDF

(F, Ga) 코도핑된 ZnO 투명 전도 박막의 솔-젤 제조와 특성 (Sol-gel Spin-coating of ZnO Co-doped with (F, Ga) as A Transparent Conducting Thin Film)

  • 남길모;권명석
    • 반도체디스플레이기술학회지
    • /
    • 제13권1호
    • /
    • pp.91-95
    • /
    • 2014
  • (F,Ga) co-doped ZnO thin film on glass substrate was fabricated via a simple non-alkoxide sol-gel spin-coating. Contrary to the F single doped ZnO thin film, the (F,Ga) co-doped thin film showed a significant reduce in electrical resistivity after a second post-heat-treatment in reducing environment. The resulting decrease in electrical resistivity with Ga co-doping is considered to be resulted from the increases both carrier density and mobility. The optical transmittance of the (F,Ga) co-doped thin film in the visible range showed higher transmittance with Ga co-doping compared with F single doped ZnO thin film.

졸-겔법에 의한 PLZT 박막의 결정화 및 균열 생성 (Crystallization and Crack Formation in Sol-Gel PLZT Thin Films)

  • 안기철;이전국;김호기;노광수
    • 한국세라믹학회지
    • /
    • 제29권3호
    • /
    • pp.216-222
    • /
    • 1992
  • PLZT thin films were prepared using sol-gel spin coating. The films mainly consisted of perovskite phase when heat treated at 600$^{\circ}C$ and in O2 or air atmosphere for 2 hours after 7 coating cycles. Cracks were formed when smaller than after 9 coating cycles. When ITO interlayer existed between Corning 7059 glass substrate and the film, cracks were not formed after 9 coating cycles, but cracks were formed after 11 coating cycles because of large volume change of the film contracting on the substrate during the heat treatment. In the observation of microstructure, the thin films have perovskite phase of about 2 $\mu\textrm{m}$ grain size and pyrochlore phase of 100∼200${\AA}$ grain size.

  • PDF

지르코니아 충전이 지르코니아계 용사코팅층의 마모마찰에 미치는 영향 (Effect of Sealing Process on the Tribological Behavior of the Plasma Spray Zirconia Based Coatings)

  • 신종한;임대순;안효석
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1998년도 제28회 추계학술대회
    • /
    • pp.265-271
    • /
    • 1998
  • High temperature wear behavior of plasma sprayed zirconia based coating sealing with zirconia sol were investigated for high temperature wear resistance application. The zirconia powders containing 2.5, 5.0, 7.5, 10.0 mol% of MoS$_2$, $Fe_2O_3$ for plasma spray were made by spray drying method. As-sprayed coating was sealed by zirconia-sol to fill up the pore and crack in coating. wear test were performed at temperature ranges from room temperature to 600$\circ$C. The microstructural changes of before and after sealing process were examined by SEM, XRD and EPMA. After sealing process, the porosity was decreased and micro-hardness was increased. The wear properties of coating after sealing process were improved by sealing of pores and cracks. The behavior of wear amount and coefficient of friction were same tendency to before sealing process.

  • PDF

High performance Organic-Inorganic Hybrid Materials for Application in OLED Barrier Coating

  • Jung, Kyung-Ho;Yun, Chang-Hun;Bae, Jun-Young;Yoo, Seung-Hyup;Bae, Byeong-Soo
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.806-809
    • /
    • 2009
  • Epoxy functionalized organic-inorganic hybrid materials (hybrimers) were synthesized by sol-gel reaction for application in OLED barrier coating. By using the calcium degradation method, the oxygen transition rate (OTR) and water vapor transition rate (WVTR) measured so far is $10^{-2}cc/m^2$-day for oxygen and $10^{-1}g/m^2$-day for water molecules with single hybrimer coating film, respectively. Encapsulated OLED devices have life time of 14hrs of a single hybrimer barrier coating and 29hrs of hybrimer/inorganic double barrier coatings at $25^{\circ}C$ and 60% relative humidity.

  • PDF

졸-겔법에 의한 CdS 분산 $SiO_2$ Glass 코팅막의 제조에 관한 연구 (A Study on the Preparation of CdS Doped $SiO_2$ Glass Coating Films by Sol-Gel Method)

  • 박한수;김경문;문종수
    • 한국세라믹학회지
    • /
    • 제30권11호
    • /
    • pp.897-904
    • /
    • 1993
  • CdS doped SiO2 glass coating films which are good candidates for the nonlinear optical materials were prepared by the Sol-Gel method. TEOS, C2H5OH, H2O and HCl were used as starting materials to obtain SiO2 matrix solutions. Then Cd(NO3)2.2H2O and CS(NH2)2 were dissolved into the SiO2 matrix solutions. Coating was performed several times in order to increase the thickness of coated film by the dip-coating method. Then heat treatments were carried out to control the size of CdS microcrystals doped in SiO2 glass matrix with respect to temperatures and times. CdS-doped SiO2 transparent coating films were successfully obtained. CdS crystals were changed from cubic to hexagonal type about $600^{\circ}C$.

  • PDF