• 지질공학
• /
• 제21권3호
• /
• pp.199-212
• /
• 2011

강원도 삼척시에 위치한 도계 석탄폐석 적치장 주변지반에서 지반변형이 발생되었다. 대상지역에서의 지반변형 원인을 조사하기 위하여 시추조사 및 현장조사를 통한 지반조사와 기존 발간된 지형도를 이용한 지형분석을 실시하였다. 시추조사결과 상부에 토층이 9-28.5 m로 존재하고 있으며, 대상지역에 발생된 주요 균열을 조사한 결과 $240{\sim}250^{\circ}$ 방향으로 지반이 변형되고 있음을 알 수 있다. 또한 기존 발간된 지형도를 이용하여 비교분석한 결과 대상지역에서는 지속적으로 석탄폐석이 적치되었음을 확인 할 수 있다. 지반조사 및 지형분석결과를 토대로 대상지역의 지형변화 원인을 분석한 결과 대상지역에 존재하는 두꺼운 토층이 내적요인이며, 석탄폐석의 지속적인 적치로 인한 하중증가 및 하단부에서의 사면절취가 외적요인으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.78-89
• /
• 2007

Two design examples of deep foundations for high-rise buildings on soft ground are introduced in this paper. The first one is a 54-story building in Ho-Chi-Minh city, Vietnam, which was designed to be founded on $2.8m{\times}1.0m$ barrette foundations with approximately 60m to 75m depth. Based on a number of design guides and existing load test data from the construction sites in Ho-Chi-Minh city, the capacity of a barrette foundation in sand or clay layered ground was calculated to be 17.2MN to 27.8MN depending on the installing depth. The second one is a 40-story building in Baku city, Azerbaijan, which was designed to be supported by 2.0m diameter bored pile foundations with approximately 23m depth. As analytical or empirical guides for the local ground conditions were very limited, the design procedure from the SNiP Code, one of Russian specifications, was adopted and used to calculate the pile capacity. The capacity of bored pile foundation in highly weathered soil was expected to be 14.8MN to 15.5MN depending on the boring depth.

• 한국터널지하공간학회 논문집
• /
• 제26권3호
• /
• pp.209-222
• /
• 2024

토압식(Earth Pressure Balance) 쉴드 TBM (Tunnel Boring Machine)은 기계화 터널 굴착 공법 중 이수식(Slurry) 쉴드 TBM에 비하여 슬러리 처리 시설을 필요하지 않아 설비가 간단하고 진동과 소음이 적어 최근에 터널 시공에 널리 사용되고 있다. 토압식 쉴드 TBM으로 터널 굴착 시 첨가제를 활용하여 굴착토 물성을 개선하는 쏘일 컨디셔닝(soil conditioning) 기법을 적용하며, 이를 통해 토압식 쉴드 TBM을 적용할 수 있는 지반의 범위를 확장할 수 있다. 본 연구에서는 쏘일 컨디셔닝을 위한 첨가제로 주로 사용되는 폴리머를 대체할 수 있는 바이오폴리머(biopolymer)의 일종인 잔탄검(xanthan gum)의 적용성을 검토하였다. 바이오폴리머란 생물학적 기원으로 생성된 폴리머로써 모두 생분해가 가능하다. 환경에 유해한 성분을 함유하고 있는 일반 폴리머(폴리아크릴산계 폴리머)와 달리 잔탄검은 유독성이 거의 없고 환경에 미치는 영향이 적어 친환경 소재로 각광받고 있다. 슬럼프 시험을 통해 유사한 워커빌리티(workability)를 보이는 시험조건을 선정하고, 실내 가압 베인전단 시험을 통해 유동학적(rheological) 특성을 평가하였다. 유사한 슬럼프 값을 보이더라도 잔탄검의 함유량이 증가할수록 유동곡선(flow curve)상에 첨두강도가 감소하는 경향이 나타났으며, 이를 통해 잔탄검 함량과 첨두강도 사이의 상관관계를 도출하였다. 일반 폴리머를 잔탄검으로 대체한다면 환경친화적이라는 장점과 더불어 장비 부하를 감소시켜 안정적인 TBM 운용이 가능할 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.210-220
• /
• 2005

We have analyzed the stability for cut-slopes at main street 3-2 line section in Pa-ju local industrial complex. After studying an additional boring test, laboratory test and face mapping etc., we have determined the extent of reinforcement, slope inclinations and soil strength parameter from the analysis of test results. After changing the inclination of slopes for ground limit and carrying out the analysis of slope stability, we applied the Mass Nailing Method to the site because of need for reinforcement to soil and weathered rock slopes. In slope for soft and hard rock sections, we also reinforced the sections that are difficult to obtain the safety without reinforcement in alteration zone.

• KIEAE Journal
• /
• 제10권4호
• /
• pp.75-80
• /
• 2010

Generally, ground-source heat pump (GSHP) systems have a higher performance than conventional air-source systems. However, the major fault of GSHP systems is their expensive boring costs. Therefore, it is important issue that to reduce initial cost and ensure stability of system through accurate prediction of the heat extraction and injection rates of the ground heat exchanger. Conventional analysis methods employed by line source theory are used to predict heat transfer rate between ground heat exchanger and soil. Shape of ground heat exchanger was simplified by equivalent diameter model, but these methods do not accurately reflect the heat transfer characteristics according to the heat exchanger geometry. In this study, a numerical model that combines a user subroutine module that calculates circulation water conditions in the ground heat exchanger and FEFLOW program which can simulate heat/moisture transfer in the soil, is developed. Heat transfer performance was evaluated for 3 different types ground heat exchanger(U-tube, Double U-tube, Coaxial).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.724-731
• /
• 2006

The purpose of this study is to estimate a landslide using the SLOPILE program from the slope reinforced by slope stability systems such as soil nailing and pile. To do this, cutting slope located at Donghae-Highway in Kwangwon-Do was considered. The behavior of slope was monitored for a long term by using instrumentation according to the reinforcement stages. The sequence of reinforcement stages was followed as pile installation, boring, soil nailing installation, anchoring and embankment. The result from this case study shows that the safety factor of slope depends on the reinforcement stage more or less.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.922-929
• /
• 2009

In this paper, 4 representative soft clayey soils in south Korea are selected to estimate the geotechnical characteristics and provide the instructions avaliable for construction works; Inchon Coast, Kum River Estuary, Kwangyang Bay, and Nakdong River Estuary. Total 2250 boring data are collected to construct the data base system on selected areas from Korea geotech DB system, scientific journals, theses, and site investigation reports. Considering the geological, topographical and regional features, geotechnical properties, deformation and strength characteristics of 4 soft clayey soils are evaluated by analyzing the constructed DB system statistically.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.952-960
• /
• 2009

Foundation soils are greatly influenced on the stability of structures. The soft clay deposited in Incheon Port area is named either nomally consolidated clay or unconsolidated clay. New harbor structures will be constructed in Incheon Port area. Not sufficient soil boring datum are obtained from the filed soil exploration due to limited time and cost. The harbor construct site is pretty large area and the soils are not homogenous. This paper presented the result of reliability analysis which was performed by both Bayesian approach and analysis of variance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 가을 학술발표회 논문집
• /
• pp.275-280
• /
• 2001

Although important developments have taken place since ESOPT 1974 both with respect to the test method as well as the interpretation of the results, many uncertainties still remain in the Standard Penetration Test(SPT). The main pitfall of SPT is that it has not been standardized differing from its terminology and further, the possibility of standardization is very low in practice. Therefore, lack of knowledge on the equipment and method of SPT tends to cause some errors in interpretation of the results. It Is especially important to understand this tendency in domestic design, because most foundations are designed based on SPT results only. Many researchers have made an effort to minimize the uncertainties of SPf in Korea, it is not cleary defined what the most effective method of execution and interpretation of SPT Some uncertainties which many geotechnical engineers encounter in practice are introduced to discuss about improvement of test procedure and interpretation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.785-789
• /
• 2009

It is essential to carry out appropriate site investigations for the accurate prediction of the geo-structure. However, the importance of the site investigation is often overlooked due to the time and expense constraints. In this study, several cases of geotechnical design perfromed in United States are introduced with the lessons about how the site investigations are planned, performed and applied for the actual design parameter determination. Based on the case studies presented herein, experienced geotechnical engineer should participate in site investigations from the planning stage through the final boring logs and utilize all the laboratory and field tests to have consistent input parameters for the soil constitutive models. Furthermore, it is also desired to have close relationship between construction industry and the academia to compensate their needs.