• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.3
• /
• pp.68-75
• /
• 2014

Soluble nitrogen produced from anaerobic digestor is able to have a strong influence on the effluent water quality of municipal wastewater treatment plants during a winter season in particular. The modeling results using the GPS-X simulation software shows that the soluble nitrogen concentration generated from the anaerobic digestor is 214.1 mg/L in the return flow and 6.2 mg/L in the inflow of the primary settler higher than those in nonexistence of the anaerobic digestor, respectively. In the case of using a separation process (flotation thickener) in order to treat the return flow from the sludge treatment system, the soluble nitrogen concentration in the effluent from the separation process and in the inflow of the primary setter could be 6.0 mg/L higher and 0.7 mg/L lower than those of nonexistence of the process, respectively. The modeling results propose the need of the equipments to be able to remove the soluble nitrogen ($NH_3-N$) produced from the digestor in the improvement projects of anaerobic digestor in municipal wastewater treatment plants.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.163-173
• /
• 2020

In this study, on-site corporate instructors participated as student-cum-workers in a degree-linked high skills Meister course to improve job competency and practical ability as proposed in the Work-Study Career Vision. Evaluation questions were then developed and their validity was verified by assessing satisfaction related to expected goals in enhancing advanced training guidance and competency as an evaluator. Satisfaction assessment was conducted based on training preparation, training implementation, training effectiveness and training administration. The Delphi Method was adopted and a total of 48 items were developed in 6 categories under 4 main areas. There were 7 evaluation items on the satisfaction of training course development under training preparation, 21 evaluation items related to the satisfaction of Off-JT and OJT courses under training implementation, 16 evaluation items related to the satisfaction of increased competency as an on-site corporate instructor and the satisfaction of enhanced practical skills and skills application at work under training effectiveness, as well as 6 evaluation items to assess satisfaction with administrative support under training administration. The final conformity assessment was conducted based on the stability, content validity ratio, consensus and convergence indicators of the developed items. Results of this study do not only apply to quality management of the high skills Meister course which is being promoted as a pilot project for work-study programs, but also serves as a rationale that may be considered as a basic research tool in the collection of various opinions to derive overall system improvement factors for the work-study high skills Meister course.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.159-169
• /
• 2014

The purpose of PMO (Project Management Office) systems implementation in public sectors is to prevent the potential risks of IT projects with the project management for the electronic government, and to improve the quality of the project. As a leading country in software areas, PMO systems will play an important role to lead the best smart electronic government in the global world. This study suggested an operating model of PMO systems in public sectors in advance to use the PMO systems in public sectors by conducting a research investigating the key organizational role as the major factor which affects the behavioral intention of PMO systems implementation. We tested a hypothesis that Effort Expectancy factors and Facilitating Condition among the interested party groups will influence the Behavioral Intention of PMO systems implementation, and the result have given no difference to the Control Effect among the interested party groups. This study have shown that the interested party groups have common recognition about the Behavioral Intention of PMO systems implementation in the public sectors.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.65-72
• /
• 2016

Personal Health Record(PHR) service can be helpful to patients with diseases requiring strict everyday care and medical treatment, such as diabetes or cancer. In this paper, we propose a PHR system specialized in collecting and analyzing health record data of cancer patients, and present the process of how the system can improve the efficiency of cancer treatment process. Through the smart device application, cancer PHR system obtains daily PHR data which is highly related and critical to cancer therapy. The analysis report is provided to the medical staff with an available format suited for Electronic Medical Record used at medical institution. With the final result of PHR analysis which is easily merged with medical chart, most efficient Chemotherapy treatment can be provided for the patients. Also it is possible for the patients to give the information of side-effect and other pain experience during therapy to their doctors without loss of information. The proposed PHR system has the effect of improving the quality of patient care by allowing the medical staff to acquire the main objective data necessary for drug prescription and medical care benefits.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2005

The purpose of this study was to investigate the distribution of stress within the regenerated bone surrounding the implant using three dimensional finite element stress analysis method. Using ANSYS software revision 6.0 (IronCAD LLC, USA), a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The $5.0{\times}11.5-mm$ screw implant (3i, USA) was used for this study, and was assumed to be 100% osseointegrated. And it was restored with gold crown with resin filling at the central fossa area. The implant was surrounded by the regenerated type IV bone, with 4 mm in width and 7 mm apical to the platform of implant in length. And the regenerated bone was surrounded by type I, type II, and type III bone, respectively. The present study used a fine grid model incorporating elements between 250,820 and 352,494 and nodal points between 47,978 and 67,471. A load of 200N was applied at the 3 points on occlusal surfaces of the restoration, the central fossa, outside point of the central fossa with resin filling into screw hole, and the functional cusp, at a 0 degree angle to the vertical axis of the implant, respectively. The results were as follows: 1. The stress distribution in the regenerated bone-implant interface was highly dependent on both the density of the native bone surrounding the regenerated bone and the loading point. 2. A load of 200N at the buccal cusp produced 5-fold increase in the stress concentration at the neck of the implant and apex of regenerated bone irrespective of surrounding bone density compared to a load of 200N at the central fossa. 3. It was found that stress was more homogeneously distributed along the side of implant when the implant was surrounded by both regenerated bone and native type III bone. In summary, these data indicate that concentration of stress on the implant-regenerated bone interface depends on both the native bone quality surrounding the regenerated bone adjacent to implant and the load direction applied on the prosthesis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.455-458
• /
• 2013

The conventional design of the information system architecture based on the personal experience of information systems has been acted as a limit in progress utilizing appropriate resource allocation and performance improvements. Architecture design depending on personal experience makes differences in variance of a designer's experience, intellectual level in related tasks and surroundings, and architecture quality according to individual's propensity. After all these problems cause a waste of expensive hardware resources. At working place, post-monitoring tools are diversely developed and are running to find the bottleneck and the process problems in the information operation. However, there are no simulation tools or models that are used for expecting and counteracting the problems at early period of designing architecture. To solve these problems we will first develop a simulation model for designing information system architecture in a pilot form, and will verify validity. If an error rate is found in the permissible range, then it can be said that the simulation reflects the characteristic of information system architecture. After the model is developed in a level that can be used in various ways, more accurate performance computation will be able to do, getting out of the old way relying on calculations, and prevent the existence of idle resources and expense waste that comes from the wrong design of architecture.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1021-1023
• /
• 2013

Currently, aircraft and automobile simulator for training provides a variety of training by making hypothetical situation on a simulator Installed on the ground Currently. And the instructor maximizes the effectiveness of the training by Monitoring training and instructing the required training. When trainees are boarding the aircraft or automobile. The Instructor in the ground is not able to monitoring aircraft, automobile. The assessment of the training is not easy after the end of the training Therefore, it is difficult to provide high quality of education to the students. In this paper, Simulation software is to develop the following. Collecting GPS and real-time information for aircraft, automobile ${\grave{a}}implementing$ 3D simulation. Implementing Current image of the aircraft or automobile in the screen by 3D Real-time monitoring of training situation at the control center utilizing for training saving 3D video files Analysis, evaluation on training After the end of the training.

• Journal of dental hygiene science
• /
• v.17 no.2
• /
• pp.160-167
• /
• 2017

The purpose of this systematic review was to investigate the association between periodontal disease and chronic kidney disease. A search of Embase, PubMed and The Cochrane Library databases was performed up to April 17, 2016. Article selection was based on cohort study design and the study subjects were patients with periodontal disease or severe periodontal disease. The final result was development of chronic kidney disease and kidney function decrease based on the estimated glomerular filtration rate values. The quantitative synthesis of the final selected articles was assessed using Review Manager statistical analysis software. A fixed-effects model meta-analysis was performed to estimate the degree of association between periodontal disease and chronic kidney disease. The search strategy identified 3,018 potentially eligible articles, of these, four studies were finally selected for meta-analysis, revealing that periodontal disease was significantly associated with the risk of developing chronic kidney disease (odds ratio, 1.65; 95% confidence interval, 1.44~1.90; p<0.001). In order to prevent the development of chronic kidney disease and kidney function decrease it is important to prevent periodontal disease, as well as minimizing the traditional risk factors known to reduce the quality of life of patients and increase disease burden.

• Journal of dental hygiene science
• /
• v.17 no.2
• /
• pp.168-174
• /
• 2017

This study was conducted to provide basic data on the relationship between the happiness and job satisfaction of dental hygienists. The research subjects were 264 dental hygienists in Busan and Gyeongsangnam-do. The study was conducted using structured questionnaires and the collected data were analyzed using IBM SPSS software, ver. 20.0. The happiness index, which was based on general characteristics, showed the greatest significant differences in life satisfaction (p<0.05) among adults over 36 years of job experience, negative emotions (p<0.01) among adults under 25 years of job experience, and negative emotions (p<0.05) among adults with 4~10 years of job experience. The factors that improved the job satisfaction of dental hygienists were life satisfaction, prime duty at the work place, and a positive effect. On the contrary, negative emotions lowered the job satisfaction. The happiness of the dental hygienist is an important factor not only for the improvement of the hygienist's personal quality of life, but also the patient's health. It is necessary for dental hygienists to maintain good relationships with coworkers during in the workplace, as well as employers, to have an administrative system that offers proper compensation, improvement of the work environment, and opportunities to improve professionalism at the workplace.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.10-16
• /
• 2012

For high speed visual inspection in semiconductor industries, it is essential to acquire two-dimensional images on regions of interests with a large field of view (FOV) and a high resolution simultaneously. In this paper, an imaging system is newly proposed to achieve high quality image in terms of precision and FOV, which is composed of single lens, a beam splitter, two camera sensors, and stereo image grabbing board. For simultaneously acquired object images from two camera sensors, Zhang's camera calibration method is applied to calibrate each camera first of all. Secondly, to find a mathematical mapping function between two images acquired from different view cameras, the matching matrix from multiview camera geometry is calculated based on their image homography. Through the image homography, two images are finally registered to secure a large inspection FOV. Here the inspection system of using multiple images from multiple cameras need very fast processing unit for real-time image matching. For this purpose, parallel processing hardware and software are utilized, such as Compute Unified Device Architecture (CUDA). As a result, we can obtain a matched image from two separated images in real-time. Finally, the acquired homography is evaluated in term of accuracy through a series of experiments, and the obtained results shows the effectiveness of the proposed system and method.