• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.996-1001
• /
• 2000

The sound transmission from the machine room where air-conditioner outdoor unit is located into the adjacent room is predicted and evaluated. The software package for statistical energy analysis(SEA) is utilized to determine the transmission losses of multi-layerd panels. To determine the noise level in the machine room, ray tracing method is adopted. The various sound transmission paths have been effectively identified and evaluated by the SEA tool.

• 소성∙가공
• /
• 제12권8호
• /
• pp.693-701
• /
• 2003

In this paper, the influence of frictional conditions on the backward impact extrusion of aluminum battery casing with large aspect ratio has been investigated. In the simulation, MSC.Superforge, a package based on the finite volume method, is used for the extrusion analysis. The formability and earing problem during the production have been evaluated by studying the sensitivity to frictional effects. During the sensitivity analysis, the friction factor was varied from 0.02 to 0.24. As the friction factor is increased, the forming height of the narrow edge is decreased, and the forming height of the wide edge is increased. When the friction factor becomes 0.2, the earing problem does not occur The experimental results show a good agreement with analytical results.

• 대한가정학회지
• /
• 제32권4호
• /
• pp.241-250
• /
• 1994

The purpose of this study was to categorize lifestyle patterns and to define the characteristics of the lifestyle of middle class residents in Seoul. Questionnaires were administered to 1572 homemakers in Seoul. Statistics with the SPSS software package for factor analysis and F-test was used. The results showed that the type of car which the residents owned was a major indicator to classify SEC(Socio Economic Class). The middle class was categorized into four groups which were relevant classifications based on determining indicators obtained from previous studies: the lower middle class which owned a Tico was classified into the Economy Concerned Lifestyle category the middle class which owned an Elantra was classified into the Health Concerned and Hobby Oriented Lifestyle category the upper middle calss which owned a Sonata was classified into the Interior Design and fashion Oriented Lifestyle category and the lower upper class which owned a Grandeur was classified into the Hobby and Fashion oriented Lifestyle category.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.395-402
• /
• 2005

This paper deals with modeling and computer simulation of a full multibody vehicle model for a driving simulator. The multibody vehicle model is based on the recursive formulation and a corresponding simulation code is generated automatically from AUTOCODE, which is a symbolic computation package developed by the authors using MAPLE. The paper describes a procedure for automatically generating a highly efficient simulation code for the full vehicle model, while incorporating realistically modeled components. The following issues have been accounted for in the procedure, including software design for representing a mechanical system in symbolic form as a set of computer data objects, a multibody formulation for systems with various types of connections between bodies, automatic manipulation of symbolic expressions in the multibody formulation, interface design for allowing users to describe unconventional force-and torque-producing components, and a method for accommodating external computer subroutines that may have already been developed. The effectiveness and efficiency of the proposed method have been demonstrated by the simulation code developed and implemented for driving simulation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.554-559
• /
• 1999

The purpose of this study is the machining of texture shapes by the contour fitting data. The hardware of the system comprises PC and scanning system, CO2 laser machine. There are four steps, (1) text image loading using scanning shapes or 2D image files, (2) generation of contour fitting data by the line and arc, cubic Bezier curve, (3) generation of NC code from the contouring fitting data, (4) machining by the DNC system. It is developed a software package, with which can conduct a micro CAM system of CNC laser machine in the PC without economical burden.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.883-887
• /
• 2000

One way of evaluating the effectiveness of a dairy breeding program is to measure response to selection. This may be direct or indirect. The objectives of this study were to estimate expected progress for direct selection on milk, fat and protein yields; to estimate the expected correlated responses on indirect selection for milk, fat and protein yields in Zimbabwean Holstein cattle and to establish the effect of selection intensity on responses. The Animal Model contained fixed effects of herd, year of calving, calving month, dry period, milking frequency and additive effects pertaining to cows, sires and dams. AIREML software package was used to analyse the data. The genetic and phenotypic parameters obtained in this study were used to compute direct and correlated responses to selection. Because of the higher heritabilities in first parity, genetic progress was found to be greater when selection was practised on first parity cows as compared to later lactations. It is therefore recommended that older cows in the herd be replaced with improved heifers so as to enhance genetic progress.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.139-151
• /
• 2012

This paper introduces an Internet-based generic simulator for outpatient clinics, named PIOS (Postech Internet-based Outpatient Simulator). Unlike other simulation tools, PIOS is operated on the Internet, is straightforward to use for outpatient process analysis, and is open to public via http://logistics.postech.ac.kr/pios with free of charge. Therefore, non-simulation expert users such as hospital administrators and managers can easily access to PIOS and conduct simulation study by themselves. In this paper, we describe the main components and programming logic of PIOS, and demonstrate its validity by comparing the output results of PIOS and a commercial software package.

• Journal of Nutrition and Health
• /
• 제19권3호
• /
• pp.146-154
• /
• 1986

The purpose of this study was to develop a computerized program for nutritional counseling and assessment of nutritional status. This study provides basic information on the feasibility of using computers in the field of foods, nutrition, and dietetics. Computerized programs developed for this study were as follows ; 1) programs for the analysis of caloric and nutritional intake. 2) programs for calculating caloric and nutritional requirements based on individual needs, 3) programs for the analysis of food intake behavior of individuals and assessment of their nutritional status. the personal computer type IBM-PC-16-OA XT was used for the development of the software for this program. Also, a work performance file was made by using the Dbase III package.

• 한국군사과학기술학회지
• /
• 제14권4호
• /
• pp.598-606
• /
• 2011

The importance of avionics systems has increased to a significant level in modern aircraft development. Modern avionics system is a complex integrated system of state-of-art hardware and software technology. Specifying the avionics system architecture is the most important task throughout the avionics system design process. This paper reviews modern avionics system architectures and proposes an effective avionics architecture suitable for modern attack helicopters.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.206.2-206.2
• /
• 2014

Recently, particle induced X-ray emission (PIXE) analysis system was installed at the 2MV ion acceleration system in Korea institute science and technology (KIST). This installation is for complement to low atomic resolution of heavy atoms at Rutherford backscattering spectrometry (RBS) system. For quantitative analysis, a mass calibration of the PIXE set-up has been done with thin film standards and. The GUPIX software package has been used to process the PIXE spectra and the results are compared with the values from RBS system. Therefore, the instrumental constant H (solid angle and correction factor) is determined relying completely on the GUPIX data base (cross-sections, fluorescence and Coster-Kronig probabilities, stopping powers and attenuation coefficients) for a large set of elements. These H values can be used in future analysis.