• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.1-5
• /
• 2005

This paper describes the main characteristics of Grid Services based on OGSA and a Grid service for aggregating service data element(SDE)s. In order to build a Grid Service, it needs to consider a systematic building approach from the high-level software architecture that represents the main system components and their interactions. The purpose of this paper is to design and implement an extended service data aggregator service in which SDE is a basic unit for collecting resource information. A GT3 based service data aggregator service is extended to apply the multiple collections based storage scheme for maintaining persistently SDEs with a XML DBMS Xindice. To provide efficient aggregating service for service data elements, which is running under wide area environment like Internet, the aggregator service is asynchronously operated by notification mechanism.

• Korean Journal of Bronchoesophagology
• /
• v.7 no.2
• /
• pp.161-167
• /
• 2001

Background and Objectives： Total laryngectomy is often required for advanced cases. But this operation induced the many inconvenience of basic daily life. Early diagnosis of laryngeal cancer is very important to prevent from this disastrous condition. In this point of view, mass screening test for early detection of laryngeal cancer is necessary. Screening test using voice has many advantages such as simple, less interventional. Voice collection by Automatic Response System(ARS) is comfortable and easy to got acoustic sample. Thus author tried to got the acoustic parameters which can differentiate normal, benign. and malignant laryngeal diseases and also checked the availability of parameters on neural network system. Materials and Methods: Author has evaluated the voice from 17 laryngeal cancer patients and 45 benign laryngeal disease patients who visited at Department of Otolaryngology, Pusan National University Hospital from May 1998 to April 2001, and 15 normal control. Author chose the sir Parameters (Jitt. vFo, Shim, vAm, NHR, SPI) that was thought to be related with voice collected by ARS among thirty-three parameters analysed by a Multi-Dimensional Voice Program (MDVP). Two-step neural network was used for the availability of six parameters. Results: The detection rate of normal voice by ARS voice analysis is 78.5% and detection rate of abnormal voice was 97.1 o/o. Among abnormal voice, the detection rate of benign laryngeal diseases and laryngeal cancers were 82.4 o/o, 70.6% respectively. Conclusion: Author concluded that six parameters and Matlab based neural network software may be effective in development of acoustic screening system for laryngeal cancer and further study should be necessary for development of new acoustic parameters.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.559-565
• /
• 2008

This study designed a new type of loop antenna that is able to detect partial discharges based on microstrip line technology. In the diagnosis of power cables, partial discharge signals are generally produced at a frequency range less than 100MHz because high frequency PD signals are lost along a propagation path in such cables. The new type of loop antenna sensor has been studied using simulation software known as CST microwave studio version 5.0. In partial discharge measurement experiments, a commercial HFCT sensor was used as a reference sensor. Several experiments were made over HFCT and loop antenna sensors for detecting partial discharges on 22.9kV MV XLPE cable. In this study, we showed the loop antenna designed in this study that can be applied as a commercial HFCT sensor.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.118-124
• /
• 2016

In this paper, the model to develop the forming process for turbine seal is suggested. And numerical approach for the shape design of the turbine seal is examined. Because of the thin thickness of the turbine seal, the seal is easily fractured in the manufacturing process. The main factors of the seal manufacturing consist of addendum angle and dedendum angle, fillet on the addendum face, number of the gear teeth, sheet initial location and gear initial location, rake and vertical clearance. The structure and shape of seal are modeled using the commercial 3D mechanical design program, CATIA(V5/R20). Also, rolling process to manufacture the turbine seal is analyzed using DEFORM$^{TM}$-3D(V11), commercial forming analysis software and runs under PC workstation. This study focused on the shape design of turbine seal. Through this research, the main factors to make the turbine seal for airplane turbine engine can be obtained. This study results are reflected to the shape design for turbine seal.

• International Journal of Highway Engineering
• /
• v.15 no.2
• /
• pp.149-157
• /
• 2013

PURPOSES : This study is to analysis for benefit and construction cost in underpass for small vehicles. METHODS : The study was performed using the traffic software VISSIM 5.20 for analysis on a variety of traffic conditions and analysed of benefits of changes through analysis of travel speed and travel time after modeling of existing underpass and small vehicle underpass. RESULTS : Results of this study, the benefits will be reduced by the introduction underpass for small vehicles were analyzed because heavy vehicles use the intersection above the underpass. However, it was required economic analysis considering both the benefits reduction and the construction costs reduction because it has the effect of reducing the construction cost. Showed that the difference in benefit changes depending on the v/c and heavy vehicles ratio and construction cost was difference by types of underpass. As a result of performing economic analysis with total benefits and construction cost, it was analyzed to be economical in underpass over a certain size. CONCLUSIONS : The result of this study are expected to be able to contribute to reviewing for feasibility due to the small vehicles underpass introduction and economic analysis. The study is case study to the underpass in Daegu. Therefore, the future requires the calculation of benefits reflect a wider range of traffic conditions and the economic analysis to construction cost calculation for various types of grad separation facilities.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.585-592
• /
• 2014

It is well known that serial belief propagation (BP) decoding for low-density parity-check (LDPC) codes achieves faster convergence without any increase of decoding complexity per iteration and bit error rate (BER) performance loss than standard parallel BP (PBP) decoding. Serial BP (SBP) decoding, such as horizontal SBP (H-SBP) decoding or vertical SBP (V-SBP) decoding, updates check nodes or variable nodes faster than standard PBP decoding within a single iteration. In this paper, we propose combined horizontal-vertical SBP (CHV-SBP) decoding. By the same reasoning, CHV-SBP decoding updates check nodes or variable nodes faster than SBP decoding within a serialized step in an iteration. CHV-SBP decoding achieves faster convergence than H-SBP or V-SBP decoding. We compare these decoding schemes in details. We also show in simulations that the convergence rate, in iterations, for CHV-SBP decoding is about $\frac{1}{6}$ of that for standard PBP decoding, while the convergence rate for SBP decoding is about $\frac{1}{2}$ of that for standard PBP decoding. In simulations, we use recently proposed generalized LDPC (GLDPC) codes with binary cyclic codes (BCC).

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.273-280
• /
• 2014

The spectrum weighted responses of various detectors were calculated to provide guidance on the proper selection and use of survey instruments on the basis of their energy response characteristics on the neutron fields. To yield the spectrum weighted response, the detector response functions of 17 neutron-measuring devices were numerically folded with each of the produced calibration neutron spectra through the in-house developed software 'K-SWR'. The detectors' response functions were taken from the IAEA Technical Reports Series No. 403 (TRS-403). The reference neutron fields of 21 kinds with 2 spectra groups with different proportions of thermal and fast neutrons have been produced using neutrons from the $^{241}Am$-Be sources held in a graphite pile, a bare $^{241}Am$-Be source, and a DT neutron generator. Fluence-average energy ($E_{ave}$) varied from 3.8 MeV to 16.9 MeV, and the ambient-dose-equivalent rate [$H^*(10)/h$] varied from 0.99 to 16.5 mSv/h.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.797-801
• /
• 2014

This research presented the concept of employing the punch-through diode triggered SCRs (PTTSCR) for low voltage ESD applications such as transient voltage suppression (TVS) devices. In order to demonstrate the better electrical properties, various traditional ESD protection devices, including a silicon controlled rectifier (SCR) and Zener diode, were simulated and analyzed by using the TCAD simulation software. The simulation result demonstrates that the novel PTTSCR device has better performance in responding to ESD properties, including DC dynamic resistance and capacitance, compared to SCR and Zener diode. Furthermore, the proposed PTTSCR device has a low reverse leakage current that is below $10^{-12}$ A, a low capacitance of $0.07fF/mm^2$, and low triggering voltage of 8.5 V at $5.6{\times}10^{-5}$ A. The typical properties couple with the holding voltage of 4.8 V, while the novel PTTSCR device is compatible for protecting the low voltage, high speed ESD protection applications. It proves to be good candidates as ultra-low capacitance TVS devices.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.211-219
• /
• 2009

In this paper, a detailed analysis of zero current or zero voltage switching boost converter using a single switch is described. The proposed topology is capable of decreasing switching loss of IGBT device using soft switching technique. As a results, it can be reduced size and weight of passive elements. Based on the mode analysis, practical design considerations are presented. We confirm the converter topology, principle of operation and simulation results obtained from the PSIM software. The performance of the proposed converter is verified by with 1kW(400V, 2.5A) prototype circuit operated at 30kHz.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.500-503
• /
• 2016

소프트웨어의 개발 단계에서는 검증을 위한 V&V(Verification & Validation) 프로세스를 통해 체계적인 개발 활동이 가능하도록 지원하고 있다. 이에 반해 소프트웨어 요구사항 분석 이전에 수행되는 연구 단계는 그렇지 못하며, 또한 소프트웨어 연구 사업의 평가 시 구체적인 기준의 부재, 평가 시간과 수집된 자료의 부족 등의 문제가 제기 되었다. 따라서 본 논문에서는 연구자의 연구 활동과 연구 평가자의 연구 평가 활동을 지원하기 위해 소프트웨어 관련 국제 표준에서 추출한 요구사항을 바탕으로 하여 목표 구조, 평가 메트릭을 도출하고, 평가 시나리오와 그것을 해설해주는 가이드라인을 생성하는 방법을 제안한다. 우리의 연구는 연구 평가를 위한 메트릭 가이드라인인 라이덴 선언에 일부 부합하는 것을 확인하였다. 연구 결과는 연구 평가의 효율화와 자동화를 위한 향후 연구의 기초가 될 것이다.