• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.366-372
• /
• 2016

This paper advances the software, hardware and mechanical design that the visually impaired can recognize the position and distance of the obstacle while walking. The first software implementation is proposed a method to implement the algorithm graph for the ratio of the distance measuring ultrasonic sensors for voltage. And it was extracted by the precise distance measuring parameter values from simulation to measure the precise distance. Second hardware implementation was designed to be able to detect obstacles in a relatively simple sensor-based walking aid for the visually impaired. In addition, using the switching regulator IC of high performance it was designed to be used to boost the Li-ion battery 3.7V to 5V. The third mechanism was developed by analyzing the sensor angle and the cane angle.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7795-7801
• /
• 2015

The aim of the present research was to establish primary characteristics of electron beams for a Varian 2100C/D linear accelerator with recently developed PRIMO Monte Carlo software and to verify relations between electron energy and dose distribution. To maintain conformity of simulated and measured dose curves within 1%/1mm, mean energy, Full Width at Half Maximum (FWHM) of energy and focal spot FWHM of initial beam were changed iteratively. Mean and most probable energies were extracted from validated phase spaces and compared with related empirical equation results. To explain the importance of correct estimation of primary energy on a clinical case, computed tomography images of a thorax phantom were imported in PRIMO. Dose distributions and dose volume histogram (DVH) curves were compared between validated and artificial cases with overestimated energy. Initial mean energies were obtained of 6.68, 9.73, 13.2 and 16.4 MeV for 6, 9, 12 and 15 nominal energies, respectively. Energy FWHM reduced with increase in energy. Three mm focal spot FWHM for 9 MeV and 4 mm for other energies made proper matches of simulated and measured profiles. In addition, the maximum difference of calculated mean electrons energy at the phantom surface with empirical equation was 2.2 percent. Finally, clear differences in DVH curves of validated and artificial energy were observed as heterogeneity indexes were 0.15 for 7.21 MeV and 0.25 for 6.68 MeV. The Monte Carlo model presented in PRIMO for Varian 2100 CD was precisely validated. IAEA polynomial equations estimated mean energy more accurately than a known linear one. Small displacement of R50 changed DVH curves and homogeneity indexes. PRIMO is a user-friendly software which has suitable capabilities to calculate dose distribution in water phantoms or computerized tomographic volumes accurately.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1914-1924
• /
• 2016

In this paper, considering virtualized Evolved Packet Core(vEPC) network for 5G mobile network, we propose architecture for supporting Service Function Chaining(SFC) in 5G mobile network. Using SFC in 5G network, dynamic path configuration and providing network services based on subscriber and traffic information. SFC technology provides logical ordered set of network functions and delivers packet through providing logical path over the physical network. Based on the perspective of 5G core network in distributed manner, we design hierarchical SFC architecture to manage SFC for global path including vEPC and SGi-LAN network, and internal path between virtualized network functions in each cloud. In this paper, we define architecture and call flow for establishing data path using SFC. Finally, we design testbed architecture for real implementation based on open source software.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.79-89
• /
• 1984

In this paper we present development of microprocessor-based 8-channel statistical multiplexer (SMUX). The hardware design includes one Z-80A CPU board with the clock rate of 4 MHz, one 16 Kbyte ROM board for program storage, one 16 Kbyte dynamic RAM board and three I/O boards, all connected through an S-100 compatible tristate bus. The SMUX can presently multiplex 8 channels with data rates ranging 50 bps to 9600 bps, but can be reduced to accommodate 4 channels by having a slight modification of software and removing one terminal I/O board. The system specifications meet CCITT recommendations X.25 link level, V.24, V.28, X.3 and X.28. Significant features of the SMUX are its capability of handling 4 input codes (ASCII, EBCDIC, Baudot, Transcode), the use of a dynamic buffer management algorithm, a diagnostic facility, and the efficient use of a single CPU for all system operation. Throughout the paper, detailed explanations are given as to how the hardware and software of the SMUX system have been designed efficiently.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.11-15
• /
• 2009

The aim of this study was to identify production difficulties of Korean learners of English in their articulation of English bilabial stops /p, b/ and labiodental fricatives /f, v/. Sixty non-sense syllables and twelve words were produced three times by nine graduate students. Test scores were measured from the score board made by FluSpeak, a speech training software program, which was designed for English pronunciation practice and improvement. Results show that 1) the subjects had lower scores in producing /p, b/ than /f, v/ from all positions, and 2) subjects had lower scores in medial (inter-vocalic) position than in initial (pre-vocalic) position and in final (post-vocalic) position when they produced /p/, /b/, /f/, and /v/. The results suggest that on the whole, Korean learners of English have much difficulty in producing /b/ and that they also have more articulatory problems in intervocalic than in the other positions when they produce these bilabial stops and labiodental fricatives.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.666-668
• /
• 2001

In this paper we are to explain the development of circuit breaker characteristic tester for 25.8kV Gas Insulated Switchgear. Because of hermetically sealed cubicle, we have the difficulties of installation and usage of tester. Therefore we developed measuring tester and software. This tester can measure CB close/trip time, coil current, stroke, chattering time. And it has CB positive/ negative discrimination program, trend management program, DB management program.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.101-107
• /
• 2005

In this paper, optimized operating parameters were found using multi-dimensional engine simulation software (KIVA-3V) and micro-genetic algorithm for heavy duty diesel engine. The engine operating condition considered was at 1,737 rev/min and 57 % load. Engine simulation model was validated using an engine equipped with a high pressure electronic unit injector (HEUI) system. Three important parameters were used for the optimization - boost pressure, EGR rate and start of injection timing. Numerical optimization identified HCCI-like combustion characteristics showing significant improvements for the soot and $NO_X$ emissions. The optimized soot and $NO_X$ emissions were reduced to 0.005 g/kW-hr and 1.33 g/kW-hr, respectively. Moreover, the optimum results met EPA 2007 mandates at the operating point considered.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.60-63
• /
• 2005

In this paper, the accidents of 6.6kV CV cable using many analysis methods such as a pattern anlysis were analyzed; the inner structure analysis; cross section analysis; SEM; EDX, etc. With the analysis and the accident reconstruction, It was possible to analyze the accident causes. For more correct assessment, another accident reconstruction and simulation with a software were required.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.647-653
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV - 1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the compared other alloys.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.853-859
• /
• 2019

A comprehensive study of photon interaction features has been made for some alloys containing Pd and Ag content to evaluate its possible use as alternative gamma radiations shielding material. The mass attenuation coefficient (${\mu}/{\rho}$) of the present alloys was measured at various photon energies between 81 keV-1333 keV utilizing HPGe detector. The measured ${\mu}/{\rho}$ values were compared to those of theoretical and computational (MCNPX code) results. The results exhibited that the ${\mu}/{\rho}$ values of the studied alloys are in the same line with results of WinXCOM software and MCNPX code results at all energies. Moreover, Pd75/Ag25 alloy sample has the maximum radiation protection efficiency (about 53% at 81 keV) and lowest half value layer, which shows that Pd75/Ag25 has superior gamma radiation shielding performance among the other compared alloys.