• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.282-290
• /
• 2003

AMR(Automatic Meter Reading) and RC(Remote Control) System have been researched from former several decade for a various power rate system, a efficient power service and rising of personal expenses, etc. But the existing AMR and RC System have disadvantage which are complex and high cost to install an individual communication network of electricity company. This paper proposed a new type of AMR and RC System using PLC with Web. and made components for proposal system. Most customer who live in apartment have an internet cable in the Republic of Korea. Therefore there is no more installation component for communication in proposal system at the apartment, except Web server system and PLC modem. so we made the PLC modem the digital watt-hour meter with a build in PLC modem and the software on server computer for establishing the proposal system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.109-112
• /
• 2010

Recently, communication components prefer Bluetooth or Zigbee for PAN. However, using these makes expensive and complicated products such as audio equipments, mobile phones, PC, etc. for transmitting simple messages with low rate. In this paper, we propose wireless communication method using ultrasonic in the audio frequency limit band with speakers and microphones which are in products. We suggest transmitting and receiving methods in the audio frequency limit band for transmitting data without affecting audio signal, and implement an ultrasonic communication modem. Finally, we verify the performance of the ultrasonic communication modem by experiments in an environment with background noise.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.321-325
• /
• 2001

Servo drives with microcomputer control provide the possibility of using modem and sophisticated control algorithms. As an additional feature it is possible to implement parallel and/or redundant software and hardware structures to realise safe motion or similar security functions. Unfortunately microcomputer control also has some impact on the behaviour of servo drives. Control algorithm, cycle time, sensors and interface have to be perfectly synchronised. Special control schemes are necessary on the line side (power supply) to meet the actual requirements concerning EMC. This contribution presents experiences and results obtained from a modem digital drive system pointing out the influences of low and high accuracy position sensors and the interdependencies mentioned above.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.57-64
• /
• 2000

In this paper, we developed the Realtime Ship Position Information System and the software in relation to the system, which consists of the on-board system and the shore-based system. The on-board system is composed a GPS receiver, a computer, and a modem. The shore-based system is composed of a telephone, a modem and a computer. Both systems are operated by the data communication program The system displays automatically the ship's movement on the digital chart by using the ship's position acquired by a GPS receiver via INMARSAT-A communication system. The results presented in many experiments indicate that the system in processing the position data well during the transmission and reception.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.24-30
• /
• 2009

In this paper, the FPGA modem platform complying with 3GPP Release 7 eHSPA specifications and its regularized verification flow are proposed. The FFGA platform consists of modem board supporting physical layer requirements, MCU and DSP core embedded control board to drive the modem board, and peripheral boards for RF interfacing and various equipment interfaces. On the other hand, the proposed verification flow has been regularized into three categories according to the correlation degrees of hardware-software inter-operation, such as simple function test, scenario test call processing and system-level performance test. When it comes to real implementations, the emulation verification strategy for low power mobile SoC is also introduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1858-1865
• /
• 2007

In this paper, we introduce the design and implementation of satellite IP modem. The designed satellite IP modem shows the performance of 0.2% overhead, BER=10-5 when Eb/No=6dB, frequency offset of 8KHz, data rate up to 1536Kbps, $F_{if}=140MHz$. The designed system is verified through software simulation and then implemented with MPC86x communication processor, TMS320C6416 DSP, and Altera FPGA. Since each hardware unit is implemented in daughter board for modularity, we can reduce the development time and easily improve the performance with using better processor. Linux is used for embedded OS because it shows better performance in IP manipulation multitask processing, and hardware control through device driver. The implemented system is tested and verified with channel simulator. Since the proposed IP modem shows small size and light weight, that can be used anywhere with easy if you need IP environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.46-56
• /
• 2002

In this paper, we describe a hardware-software co-verification methodology and environment in developing a mobile station modem chip for cdma2000 1x which is one of the 3rd generation mobile communication standards. By constructing an efficient co-verification environment for a register-transfer-level hardware model and a physical-layer software model combining a channel link simulator and a versatile test-bench, we can drastically reduce both time and cost for developing a complex three-million-gate class system integrated circuit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.906-911
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.517-520
• /
• 2003

Orthogonal Frequency Division Multiplexing (OFDM) is a promising technology for high speed multimedia communication in a frequency selective multipath channel. In this paper, Software IPs for the synchronizer of IEEE 802.11a Wireless LAN system are designed and optimized for TI's TMS320C6201 fixed point DSP. As a result of the execution cycles of the target DSP for each functions of the system, an efficient HW/SW partitioning method can be considered.

• 연구논문집
• /
• s.22
• /
• pp.27-38
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent control system to he wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steering, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR(JnfraRed) modem. Especially it is possible to easily network to use not an exclusive controller of AGV but personal computer(PC) when communicate and interface a different kind of controller.