• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.117-129
• /
• 2002

Concentration of welding fumes and their components is known to be hazardous to welder and adjacent worker. To determine the generation rates of metals in fumes, $CO_2$ flux cored arc welding on stainless steel was performed in well designed fume collection chamber. Variables were different products of flux cored wire(2 domestic products and 4 foreign products) and input energy(low-, optimal- , high input energy). Mass of welding fumes was determined by gravimetric method(NIOSH 0500 method), and 17 metals were analysed by inductively coupled plasm-atomic emission spectroscopy(NIOSH 7300 method). Flux cored wire tube and flux were analysed by scanning electron microscopy to determine their metal composition. 17 metals were classified by their generation rates. Generation rates of iron, manganese, potassium and sodium were all above 50mg/min at optimal input energy level. Generation rates of chromium and amorphous silica were 25~50mg/min. At 1~25mg/min level, nickel, titanium, molybdenum, and aluminum were included. Copper, zinc, calcium, lead, magnesium, lithium, and cobalt were generated below 1 mg/min. Generation rates of metal components in fumes were influenced by input energy, types of flux cored wire. Flux cored wire was consisted of outer shell tube and inner flux. Iron, chromium, and nickel were the major components of outer tube. Flux contained iron, chromium, nickel, potassium, sodium, silica, and manganese. The use of flux cored wire can increase the hazards by increasing the amounts of fumes formed relative to that of solid wire. The reason might be the direct transfer of elements from the flux, since the flux is fine power. Ratio of metals to the fume of flux cored wire was lower than that of solid wire because non-metal components of flux were transferred. Total metal content of fumes in flux cored arc welding was 47.4(24.3~57.2) percent that is much lower than that of solid wire, 75.9 percent. We found that generation rates of iron, manganese, chromium and nickel, all well known to cause work related disease to welder, increased more rapidly with increasing input energy than those of fumes. To reduce worker exposure to fumes and hazardous component at source, further research is needed to develop new welding filler materials that decrease both the amount of fumes and hazardous components.

• Mycobiology
• /
• v.42 no.1
• /
• pp.59-65
• /
• 2014

Entomopathogenic fungi are promising pest-control agents but their industrial applicability is limited by their thermosusceptibility. With an aim to increase the thermotolerance of Isaria fumosorosea SFP-198, moisture absorbents were added to dried conidial powder, and the relationship between its water potential and thermotolerance was investigated. Mycotized rice grains were dried at $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$ and the drying effect of each temperature for 24, 48, 96, and 140 hr was determined. Drying for 48 hr at $10^{\circ}C$ and $20^{\circ}C$ reduced the moisture content to < 5% without any significant loss of conidial thermotolerance, but drying at $30^{\circ}C$ and $40^{\circ}C$ reduced both moisture content and conidial thermotolerance. To maintain thermotolerance during storage, moisture absorbents, such as calcium chloride, silica gel, magnesium sulfate, white carbon, and sodium sulfate were individually added to previously dried-conidial powder at 10% (w/w). These mixtures was then stored at room temperature for 30 days and subjected to $50^{\circ}C$ for 2 hr. The white carbon mixture had the highest conidial thermotolerance, followed by silica gel, magnesium sulfate, and then the other absorbents. A significant correlation between the water potential and conidial thermotolerance was observed in all conidia-absorbent mixtures tested in this study (r = -0.945). Conidial thermotolerance in wet conditions was evaluated by adding moisturized white carbon (0~20% $H_2O$) to conidia to mimic wet conditions. Notably, the conidia still maintained their thermotolerance under these conditions. Thus, it is evident that conidial thermotolerance can be maintained by drying mycotized rice grains at low temperatures and adding a moisture absorbent, such as white carbon.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2098-2105
• /
• 2016

Massive reserves of methane ($CH_4$) remain unexplored as a feedstock for the production of liquid fuels and chemicals, mainly because of the lack of economically suitable and sustainable strategies for selective oxidation of $CH_4$ to methanol. The present study demonstrates the bioconversion of $CH_4$ to methanol mediated by Type I methanotrophs, such as Methylomicrobium album and Methylomicrobium alcaliphilum. Furthermore, immobilization of a Type II methanotroph, Methylosinus sporium, was carried out using different encapsulation methods, employing sodium-alginate (Na-alginate) and silica gel. The encapsulated cells demonstrated higher stability for methanol production. The optimal pH, temperature, and agitation rate were determined to be pH 7.0, $30^{\circ}C$, and 175 rpm, respectively, using inoculum (1.5 mg of dry cell mass/ml) and 20% of $CH_4$ as a feed. Under these conditions, maximum methanol production (3.43 and 3.73 mM) by the encapsulated cells was recorded. Even after six cycles of reuse, the Na-alginate and silica gel encapsulated cells retained 61.8% and 51.6% of their initial efficiency for methanol production, respectively, in comparison with the efficiency of 11.5% observed in the case of free cells. These results suggest that encapsulation of methanotrophs is a promising approach to improve the stability of methanol production.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.893-896
• /
• 2008

As this study is to test fundamental properties of cement mortars using in Metakaolin. Recently concern is increasing for concrete durability because of an increase in the concrete structure exposed to bad environments. In the event that mineral admixture Added, microstructure will be fined, so durability can be good. Also, the study for new admixture is progressing expect that admixture widely used, for example, silica fume, fly-ash, and slag, etc. Therefore this study is making an experiment on fundamental properties of diversities sample curing at water, sea water, 10% sodium sulfate solution, and magnesium sulfate solution, to compare using for metakaolin with silica fume and fly-ash.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.1
• /
• pp.67-79
• /
• 2001

The objective of this study is to determine the engineering properties of micro fine hybrid silicate grout materials that were developed recently. In this study, MSG-N type was mainly used as grout materials, and the chemical components, grain size distribution, mineral characteristics were analyzed. Moreover, the properties of active silica and ordinary portland cement acting as coagulating agent were analyzed and compared with each other. To determine the engineering properties, the bleeding test, viscosity test, coagulation test, examination with naked eye, photographing by using SEM, uniaxial compression test and in-situ application test for reclaimed ground were carried out. A series of test results showed that the strength of micro fine hybrid silicate grout materials was about twice that of ordinary sodium silicate grout materials, and alkali leakage decreased dramatically when MSG method was utilized. Especially, based on the evaluation of the application of the MSG method to field, this method would be very effective in reducing coefficient of permeability due to its excelent permeability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.1
• /
• pp.23-28
• /
• 1987

A series of field and laboratory experiments were conducted to find out the changes of some soil chemical constituents in different soil depth with three different soil textures as Bongnam-clayey, Gwanghwal-silty loam and Mangyeong fine sandy soil on the assessment of reclamation duration in Fluvio-marine soil. The result obtained were summarized as follows; 1. Exchangeable potassium, calcium, magnessium, sodium with manganes, silica and cation exchange capacity were remarkably decreased with assessment of reclamation duration. Decreasing tendency was pronounced more in sandy soil than silty loam or clayly soil. 2. Soil organic matter content in top soil was increased with increasing of reclamation years. From reclamation time, about 30 years in clayly and about 80 years in silty loam and sandy soil were necessary for the maintanance of averaged organic matter content to 2.5%. 3. Potassium activity ratio ($K/{\sqrt{Ca+Mg+Na}}$) was differed with soil depth, soil texture and assessment of reclamation duration. About 50 years is may be necessary for the maintanance of potassium activities ratio in ordinary paddy soil of 0.05-0.2. 4. Percent of adsorbed sodium (PAS), ratio of adsorbed sodium (RAS) and ratio of sodium adsorbtion(RSA) were remarkably decreased with assessment of reclamation duration. Specially, decreasing tendency was pronounced more in sandy soil than silty loam and clayly soil 5. Amount of clay content in subsoil was appearently decreased during 30 years of reclamation, but clay contents in top soil was appearently decreased 50 years after reclamation.

• Restorative Dentistry and Endodontics
• /
• v.39 no.2
• /
• pp.95-103
• /
• 2014

Objectives: This study evaluated the effect of three antioxidizing agents on pullout bond strengths of dentin treated with sodium hypochlorite. Materials and Methods: Root canals of 75 single-rooted human teeth were prepared. Fifteen teeth were irrigated with normal saline for a negative control group, and the remaining 60 teeth (groups 2 - 5) with 2.5% NaOCl. The teeth in group 2 served as a positive control. Prior to post cementation, the root canals in groups 3 - 5 were irrigated with three antioxidizing agents including 10% rosmarinic acid (RA, Baridge essence), 10% hesperidin (HPN, Sigma), and 10% sodium ascorbate hydrogel (SA, AppliChem). Seventy-five spreaders (#55, taper .02, Produits Dentaires S.A) were coated with silica and silanized with the Rocatec system and ceramic bond. All the prepared spreaders were cemented with a self-adhesive resin cement (Bifix SE, Voco Gmbh) in the prepared canals. After storage in distilled water (24 h/$37^{\circ}C$), the spreaders were pulled out in a universal testing machine at a crosshead speed of 1.0 mm/min. Pull-out strength values were analyzed by one-way ANOVA and Tukey's HSD test (${\alpha}$ = 0.05). Results: There were significant differences between study groups (p = 0.016). The highest pullout strength was related to the SA group. The lowest strength was obtained in the positive control group. Conclusions: Irrigation with NaOCl during canal preparation decreased bond strength of resin cement to root dentin. Amongst the antioxidants tested, SA had superior results in reversing the diminishing effect of NaOCl irrigation on the bond strength to root dentin.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.427-435
• /
• 2012

In order to evaluate the effects of exposure conditions on the resistance to sulfate attack of normal and blended cement mortars, several mechanical characteristics of the mortars such as expansion, strength and bulk density were regularly monitored for 52 cycles under sodium sulfate attack. The mortar specimens were exposed to 3 different types of exposure conditions; 1) continuous full immersion(Exposure A), continuous half-immersion(Exposure B) and cyclic wetting-drying(Exposure C). Experimental results indicated that the maximum deterioration was noted in OPC mortar specimens subjected to Exposure B, showing the wide cracks in the portions where attacking solution is adjacent to air. Additionally, the beneficial effect of ground granulated blast-furnace slag and silica fume was clearly observed showing a superior resistance against sodium sulfate attack, because of its lower permeability and densified structure. Thus, it is suggested that when concrete made with normal cement is exposed to sulfate environment, proper considerations on the exposure conditions should be taken.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.456-462
• /
• 1992

This study was performed to rapid fermentation from sardine hydrolyzate by using column reactor. The column reactor was constructed from three glass columns $(30cm{\times}5cm)$ and each column was packed with colloidal silica and sodium alginate (1:5) on which Pediococcus halophilus R-22, Saccharomyces rouxii R-60 and Candida etchellsii H-50, respectively, was previously fixed. At that time, optimal conditions for rapid fermentation were found the pH of 5.2, temperature of $30^{\circ}C$ and 10% NaCl. For rapid fermentation, immobilized whole cells of P. halophilus R-22, S. ruoxii R-60 and C. etchellsii H-50 packed the each column reactor were produced 0.75% lactic acid, 2.5% ethylalcohol and 18 mg/l 4-ethylguaiacol under the optimal conditions.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.16 no.2
• /
• pp.157-160
• /
• 2018

Chronic silica nephropathy has been associated with tubulointerstitial disease, immune-mediated multisystem disease, chronic kidney disease, and end-stage renal disease. On the other hand, acute intentional exposure is extremely rare. The authors' experienced a 44-year-old man who took rapid cement hardener (sodium silicate) in a suicide attempt whilst in a drunken state. He visited the emergency department approximately 1 hour after ingestion. Information on the material was obtained after 3 L gastric lavage. The patient complained of a sore throat, epigastric pain, and swollen to blood tinged vomitus. Proton pump inhibitors, hemostats, steroid, and fluids were administered. Nine hours after ingestion, he was administered 200 mL hematochezia. Immediately after, a gas-troenterologist performed an endoscopic procedure that revealed diffuse hyperemic mucosa with a color change and variable sized ulceration in the esophagus, whole stomach, and duodenal $2^{nd}$ portion. Approximately 35 hours later, persistent oligouria and progressive worsening of the renal function parameters (BUN/Cr from 12.2/1.2 to 67.5/6.6 mg/dL) occurred requiring hemodialysis. The patient underwent 8 sessions of hemodialysis for 1 month and the BUN/Cr level increased to 143.2/11.2 mg/dL and decreased to 7.6/1.5 mg/dL. He was discharged safely from the hospital. Follow up endoscopy revealed a severe esophageal stricture and he underwent endoscopic bougie dilatation. Acute cement hardener (sodium silicate) intoxication can cause renal failure and strong caustic mucosal injury. Therefore, it is important to consider early hemodialysis and treatment to prevent gastrointestinal injury and remote esophageal stricture.