• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.38-47
• /
• 2009

This paper aims to evaluate the freeway traffic management Strategy based on exTMS according to traffic situation of freeway. As freeway user's demands increase, we thus need future-oriented and optimized traffic management. So, through improving the existing system and introducing the advanced system, these systems evaluate for not only preparing the application in real world but also preliminary feasibility. To evaluate effects of the traffic management based on exTMS, in this study, shoulder LCS, advanced VMS(assumption in it is improving next-generation system which it can be offering diverse dynamic traffic information), Ramp-metering system are applicated in simulation. In addition, this study evaluates the effect when all proposed systems are applicated, and compare the individual effect of when independent system is applicated, through considering about traffic condition of V/C=0.5, V/C=0.8, V/C=1.2. The study results show that all assumed cases, the travel speed were improved according to the increasing V/C. Furthermore, the results of evaluated the individual system show that the shoulder LCS was found to be the largest effect, and the effect of VMS(detour rate is 11%) is larger than the other cases.

• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2007

1. Purpose : This study is to present effective exposure conditions to acquire the best image of simple abdomen in Film Screen (F.S) system and Computed Radiography (C.R) system. 2. Method : In the F.S system, while an exposure condition was fixed as 70kVp, images of a patients simple abdomen were taken under the different mAs exposure conditions. Among these images, the best one was chosen by radiologists and radiological technologists. In the C.R system, the best image of the same patient was acquired with the same method from the F.S system. Both characteristic curves from F.S system and C.R system were analyzed. 3. Results : In the F.S system, the best exposure condition of simple abdomen was 70kVp and 20mAs. In the CR system, with the fixed condition at 70kVp, the image densities of human organs, such as liver, kidney, spleen, psoas muscle, lumbar spine body and iliac crest, were almost same despite different environments (3.2mAs, 8mAs, 12mAs, 16mAs and 20mAs). However, when the exposure conditions were over or under (below) 12mAs, the images between the abdominal wall and the directly exposed part became blurred because the gap of density was decreased. In the C.R system, while the volume of mAs was decreased, an artifact of quantum mottle was increased. 4. Conclusion : This study shows that the exposure condition in the C.R system can be reduced 40% than in the F.S system. This paper concluded that when the exposure conditions are set in CR environment, after the analysis of equipment character, such as image processing system(EDR : Exposure Data Recognition processing), PACS and so on, the high quality of image with maximum information can be acquired with a minimum exposure dose.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.179-190
• /
• 2022

In this study, we investigated the characteristic impedance and bandwidth of CPW3DCS (coplanar waveguide employing periodic 3D coupling structures), and examined its potential for the development of a marine radio communication FISoC (fully-integrated system on chip) semiconductor device. To extract bandwidth and characteristic impedance of the CPW3DC, we induced a measurement-based equation reflecting measured insertion loss, and compared the measured results of the propagation constant β and characteristic impedance with the measured ones. According to the results of the comparison, the calculated results show a good agreement with the measured ones. Concretely, the propagation constant β and characteristic impedance exhibited an maximum error of 3.9% and 6.4%, respectively. According to the results of this study, in a range of LT = 30 ~ 150 ㎛ for the length of periodic structures, the CPW3DC exhibited a passband characteristic of 121 GHz, and a very small dependency of characteristic impedance on frequency. We could realize a low impedance transmission line with a characteristic impedance lower than 20 Ω by using CPW3DCS with a line width of 20 ㎛, which was highly reduced, compared with a 3mm line width of conventional transmission line with the same impedance. The characteristic impedance was easily adjusted by changing LT. The above results indicate that the CPW3DC can be usefully used for the development of a wireless communication FISoC (fully-integrated system on chip) semiconductor device. This is the first report of a study on the bandwidth of the CPW3DC.

• Journal of KIISE:Software and Applications
• /
• v.30 no.5_6
• /
• pp.587-597
• /
• 2003

The C language is widely adopted for safety-critical systems. However, it is known that the C language is an unsuitable choice for safety-critical system since the C language includes several bad language features such as heavy use of pointers. The aim of this work is to define safe subset of the C language and translate the subset into the SPARK Ada so that we can verify the program's safety using SPARK analysis tools. SPARK is a safe subset of Ada and has been successfully applied to high integrity system development. The C program translated into SPARK has the same integrity level as SPARK, and the program correctness can be verified by using Examiner which is a SPARK analysis tool. An elevator controller case study is presented and is used to demonstrate the potential use of our approach to implement a realistic system. We also developed a translator that automatically translates C code into SPARK in accordance with the translation rules.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1969-1971
• /
• 2004

For evaluation of partial discharge performances of electrical power appratus such as Insulator, circuit breaker and transformer and so on, Partial discharge measuring system(ERA) consisted of PD detector including amplifier, coupling capacitor, PD calibrator and voltage divider are used PD measuring system is very important factor which affect the test result and show reliability of test result in test laboratory, In this paper, we describe tracebility and uncertainty of PD measuring system in test laboratory based on IEC 60270.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.150-157
• /
• 1996

The hob is considered as an effective gear cutting tool for achieving the various gears such as spur gear, helical gear, worm gear and so on. To enhance the productivity and precision of hobs and the competitive ability of domestic CNC hob relieving lathes, a CAM system for CNC hob relieving lathe needs to be realized. In this study, the CAM system is developed based on the personal computer and C language. Besides the automatic generation of CNC data, the developed CAM system has the various capabilities related to the generation of tool path, the cutting simulation for verifying the generated CNC data and forecasting the cutting time, the DNC operation for communicating the CNC data with CNC controller by RS232C port, and the estimation of undercut length for verifying the hob cutting conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.18-23
• /
• 1991

We need general developing environment to control robot with effect but less energy. So, software and hardware tools are very important. In this paper, we present a general-purpose robot control language and its implementation on Real Time O/S and VME bus system. The system runs on the VMEexec Real Time Operating System and robot program is written in the "C" language. The developed program is linked with the robot control C library io produce an executable image. Under the developed robot control environment, the user can write a general high-level control program leaving all the specific information about the robot in a robot specific file.ific file.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.2 no.2
• /
• pp.83-91
• /
• 1979

The purpose of this study is to analyze the direct relationship between doctors and number of patients to be treated by applying many kinds of I E's techniques. Generally, doctors in this research work both at OPD & IPD. Under the hospital manegement system that they are applying in, doctor's daily working schedules are instable because the numbers of OPD patients very daily. Therefore, the amount of time they spend for inward Patients are variable too. So the numbers of Patients have great influence to the whole hospital system management. In the first place, the author researched and analyzed a QC of administrative system. Tn the second place, the author carried out Work Sampling with a view for understanding quantity of a doctor's operation. The author suppose this research and analysis is one approach for improving systematic lay-out planning at outpatient waiting room where has many problems to be solved and suggest several process for improvement.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.45-49
• /
• 2001

To maintain the freshness of produce, because of stand away between produced and consumer, we need refrigeration system that can supply to consumer at cold chain as soon as gathering. General refrigeration system consist of refrigeration chamber or low temperature store. But the vacuum technology can rapidly refrigeration without refrigerator. This precool system possible to get low precooled temperature, suitable for the fishes, the meat, the vegetables, the fruit etc. Especially get advantage that quality maintain through rapid refrigeration of ferment directly generate heat. Vacuum precool system's principle is that water saturated temperature reduce according to pressure is get to vacuum area, so product temperature reduce as water evaporation at product. In vacuum suction, unit, on early experiment period run the rotary type vacuum pump at purpose pressure, then maintain pressure by water-diven ejector. As the results, cabbage took about 60 minutes to reach from $23.2^{\circ}C$ to $4.5^{\circ}C$at 5mgHg abs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.443-444
• /
• 2006

The influence of the heat sources on LED junction temperature are Engine room air, Back plate, Electric power device, and so on. LED lamp cooling system is considered to be an important subject fur high light efficiency. Because LED Chip will be problem When LED junction temperature be over $135^{\circ}C$, In this Study, The Looped Heat Pipe System is considered to prevent LED Chip fall. The LHPS is consist of evaporator part, condenser part, heat pipe part. The working fluid of LHPS is HCFC-123. In this study, to prevent LED Chipfall, we study thermal characteristics for Looped Heat Pipe System with LED lamp.