• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.500-507
• /
• 2009

Pb-free solder has recently been used in electronics in efforts to meet environmental regulations, and a number of Pb-free solder alloy choices beyond the near-eutectic SnAgCu solder are now available. With increased demand for thin and portable electronics, the high cost of alloys containing significant amounts of silver and their poor mechanical shock performance have spurred the development of low Ag SnAgCu solder, which provides improved mechanical performance at a reasonable cost. Although low Ag SnAgCu solder exhibits significantly higher fracture resistance under high-strain rates, little thermal fatigue data exist for this solder. Therefore, it is necessary to investigate thermal fatigue reliability of low Ag SnAgCu solder under variation of thermal stress in order to allow its implementation in electronic products with high reliability requirements. In this study, the reliability of Sn0.3Ag0.7Cu(SAC0307), a low Ag solder alloy, is discussed and compared with that of Sn3Ag0.5Cu(SAC305). Three sample types and six samples size are evaluated. Mechanical properties and microstructure of the solder joint are investigated under thermal shock cycles. It was observed that the mechanical strength of SAC0307 dropped slightly with thermal cycling relative to that of SAC305. This reveals that the failure mode of SAC0307 is different from that SAC305 under this critical condition.

• 한국재료학회지
• /
• 제10권11호
• /
• pp.770-777
• /
• 2000

기계적 합금화 공정으로 제조한 $1{\mu\textrm{m}}$ 이하 크기의 $Cu_6Sn_5$를 63Sn-37Pb 솔더합금에 첨가하여, $Cu_6Sn_5$ 첨가분율에 따른 미세구조와 기계적 성질을 Cu를 첨가한 솔더합금과 비교하였다. $Cu_6Sn_5$를 첨가한 솔더합금에 비해 Cu를 첨가한 솔더합금에서 첨가분율에 따른 $Cu_6Sn_5$ 함량의 증가와 크기 성장의 정도가 더욱 현저하게 발생하였다. Cu를 첨가한 솔더합금에 비해 $Cu_6Sn_5$를 첨가한 솔더합금에서 항복강도의 향상 정도는 저하하였으나, 더 높은 최대인장강도를 얻을 수 있었다. 1~9 vol%의 $Cu_6Sn_5$를 첨가함에 따란 63Sn-37Pb 솔더합금의 항복강도가 23 MPa에서 36MPa 정도로 증가하였으며, 1~9vol%의 Cu 첨가시에는 항복강도가 40 MPa로 향상되었다. 각기 5 vol%의 $Cu_6Sn_5$와 Cu를 첨가함에 따라 63Sn-37Pb 솔더합금의 인장강도가 34.7 MPa에서 45.3MPa and to 43.1 MPa로 향상되었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 추계 기술심포지움 초록집
• /
• pp.49-49
• /
• 2004

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1856-1863
• /
• 2004

In the last 50 years, lead-contained solder materials have been the most popular interconnect materials used in the electronics industry. Recently, lead-free solders are about to replace lead-contained solders for preventing environmental pollutions. However, the reliability of lead-free solders is not yet satisfactory. Several researchers reported that lead-contained solders have a good fatigue property. The others published that the lead-free solders have a longer thermal fatigue life. In this paper, the reason for the contradictory results published on the estimation of fatigue life of lead-free solder is investigated. In the present study, fatigue behavior of 63Sn37Pb, and two types of lead-free solder joints were compared using pseudo-power cycling testing method, which provides more realistic load cycling than chamber cycling method does. Pseudo-power cycling test was performed in various temperature ranges to evaluating the shear strain effect. A nonlinear finite element model was used to simulate the thermally induced visco-plastic deformation of solder ball joint in BGA packages. It was found that lead-free solder joints have a good fatigue property in the small temperature range condition. That condition induce small strain amplitude. However in the large temperature range condition, lead-contained solder joints have a longer fatigue life.

• 마이크로전자및패키징학회지
• /
• 제5권1호
• /
• pp.7-18
• /
• 1998

In the flip chip interconnection on organic substrates using eutectic Pb/Sn solder bumps highly reliable Under Bump Metallurgy (UBM) is required to maintain adhesion and solder wettability. Various UBM systems such as 1$\mu$m Al/0.2$\mu$m Pd/1$\mu$m Cu, laid under eutectic Pb/Sn solder were investigated with regard to their interfacial reactions and adhesion proper-ties. The effects of numbers of solder reflow and aging time on the growth of intermetallic compounds (IMCs) and on the solder ball shear strength were investigated. Good ball shear strength was obtained with 1$\mu$m Al/0.2$\mu$m Ti/5$\mu$m Cu and 1$\mu$m Al/0.2$\mu$m ni/1$\mu$m Cu even after 4 solder reflows or 7 day aging at 15$0^{\circ}C$. In contrast 1$\mu$m Al/0.2$\mu$m Ti/1$\mu$m Cu and 1$\mu$mAl/0.2$\mu$m Pd/1$\mu$m 쳐 show poor ball shear strength. The decrease of the shear strength was mainly due to the direct contact between solder and nonwettable metal such as Ti and Al resulting in a delamination. In this case thin 1$\mu$m Cu and 0.2$\mu$m Pd diffusion barrier layer were completely consumed by Cu-Sn and pd-Sn reaction.

• 마이크로전자및패키징학회지
• /
• 제12권4호통권37호
• /
• pp.281-287
• /
• 2005

공정조성의 SnPb 솔더 선형시편에서 electromigration 현상을 실시간 주사전자현미경을 이용하여 관찰하였다. 공정조성 SnPb 솔더시편에 대한 electronigration 실험은 ${\times}10^4A/cm^2,\;90^{\circ}C$에서 실시하였다. 주사전자현미경 챔버 내에서 진행되는 electromigration 실험 동안 음극의 보이드 형성과 양극의 힐록 성장을 실시간으로 관찰하였다. 음극에서 일어나는 보이드 크기를 실시간 관찰한 결과, 공정조성 SnPb 솔더의 electromigration 거동은 보이드 형성 전에 가지는 잠복기의 존재를 명확히 알 수 있었고, 본 결과는 electromigration 거동으로 인한 플립칩 솔더 범프의 보이드 생성에 대한 잠복기와 관련이 있었다.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.43-47
• /
• 2001

Sn-3Ag-8Bi-5In 솔더는 중온계 무연솔더의 하나로서 개발되었다. In함유 솔더는 고가이지만, 솔더의 융점은 Sn-Ag-Cu 합금계보다 낮다. 본 연구에서 사용된 Sn-3Ag-8Bi-5In 솔더의 용융범위는 188~$204^{\circ}C$ 사이이다. 본 연구에서는 Sn-3Ag-8Bi-5In 솔더의 무연솔더로서의 적용가능성을 조사하기 위하여 솔더의 젖음특성을 평가하였다. Sn-3Ag-8Bi-5In 솔더의 젖음성을 기존 솔더 및 다른 무연솔더와 비교하기 위하여 Sn-37Pb, Sn-3.5Ag 공정솔더의 젖음특성도 조사하였다. 실험결과 영점시간과 젖음시간은 Sn-3Ag-8Bi-5In솔더의 경우 $240^{\circ}C$에서 각각 1.1, 2.2 초로서 Sn-37Pb 및 Sn-3.5Ag 무연솔더에 비하여 비슷하거나 다소 우수하였다. 또한, Sn-3Ag-8Bi-5In의 평형젖음력은 $240^{\circ}C$에서 5.8 mN으로 Sn-37Pb 솔더보다 낮고 Sn-3.5Ag 솔더보다 높았다.

• 한국재료학회지
• /
• 제17권8호
• /
• pp.402-407
• /
• 2007

In electronics manufacturing processes, soldering process has generally been used in surface mounting technology. Because of environmental restriction, lead free solders as like a SnAgCu ternary system are being used widely. After soldering process, the formation and growth of intermetalic compounds(IMCs) are formed in the interface between solder and Cu substrate as follows isothermal temperature and time. In this studies, therefore, we investigated the effects of the Cu substrate thickness on the IMC formation and growth of Sn-40Pb/Cu and Sn-3.0Ag-0.5Cu/Cu solder joints, respectively. The effect of the Cu thickness in PCB Cu pad and pure Cu plate was analyzed as measuring of thickness of each IMC. After solder was soldered on PCB and Cu plate which have different Cu thickness, we measured the IMC thickness in solder joints respectively. Also we compared with the effectiveness of Cu thickness on the IMC growth. From these results, we calculated the activation energy.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.99-102
• /
• 1999

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1996년도 재료학회 춘계학술발표회
• /
• pp.25-26
• /
• 1996