• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.915-919
• /
• 2014

Since smart phones are widely used globally, the demand for high-speed mobile communications are increasing. To accommodate the increased communication demand, the next-generation mobile communication services such as LTE-Advanced are deployed. In the LTE-Advanced base stations, the base station schemes of Digital Unit (DU) and Radio Unit (RU) are widely used. Here, the link between DU and RU is called fronthaul link. In the current fronthaul link, a digital optical communication interface is used, which is called Common Public Radio Interface (CPRI). However, the CPRI link cannot support the increased mobile traffic efficiently. Therefore, in this paper, we investigate an alternative technology based on the Radio over Fiber (RoF) to accommodate the increased mobile traffic economically.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.113-123
• /
• 2012

This Study analyzes effects of establishment and dis-establishment of Ministry of Information and Communication(MIC) to provide a recommendation to the next government. This study compares its background, accomplishments and failures between a MIC establishment by the Civilian Government and a MIC dis-establishment by the current Government. Results of the analysis indicate MIC dis-establishment had negative effects: plunge of IT national competition due to the absence of IT control tower and organizational inefficiency due to poor communication and duplicate investment among inter-governments. This study is significant in that it recommends "Ministry of IT and Media Smart Convergence" establishment to be totally governing IT control tower and cultural content as a new trend for the next government.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.55-61
• /
• 2016

As the price-performance ratio of embedded PCs improves, the benefits of the PC-Fi can be maximized by designing an embedded PC-Fi system. In this paper presents the design of an embedded PC-Fi that can be manipulated by a remote controller based on mobile devices such as smart phones or tablets. Additionally, an interactive control system and its GUI, through which the user can select and play music as they like at ease, are presented. The case that a large amount of music is stored in the PC-Fi system requires a function allowing the user to easily select the music they want to listen to. In order to implement this function, a DB containing detailed information of each track can be used to find the location of the desired music with keywords provided by the user. In this proposed system, the embedded PC-Fi system and remote controller are mutually connected via a WiFi network, and more than one user can remotely control the embedded system with their own mobile device.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.11-19
• /
• 2015

Due to recent development in mobile devices, the mobile device utilization and many related applications have been increasing. Most of initial applications on mobile devices just showed simple information, but now they processes huge data. However, smart devices have certain limitations in processing massive data. Especially, if the size of data increases, the speed of data processing adversely decreases, so the performance of programs also decreases. If hardware specification of the mobile devices is not enough to handle it, response time will be drastically delayed. To overcome these drawbacks, most of application running on mobile devices communicate with their servers to manage data. XML is a proper language for data communication to send and receive data between servers and mobile devices, because it defines rules of document's format and it is a textual data format and small-sized language. However, mobile devices have limitation such as memory, CPU and wireless network to process huge data and XML also takes a lot of time to communicate with servers and devices and handle data, so it could be overhead in service time. Binary XML is an alternative of performance improvement in data processing, which has XML's benefits and minimizes the XML size by binary coding. However, most of binaryXML which are used on applications don't fit on mobile applications. In this paper, we surveyed many kinds of binaryXML, compared merits and demerits to find a binaryXML for mobile applications. We propose how to use binary XML and implemented an electronic attendance system using binary XML to overcome the limitation of XML and to reduce the load of data communications between servers and devices.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.47-53
• /
• 2020

In the case of a failure due to equipment deterioration in the public address system or a worker's mistake during construction, broadcasting becomes impossible. In this situation, we have designed a more advanced management broadcast system that can broadcast. The broadcasting service is operated using main broadcasting device, and local broadcasting device operates separately only in the local area. If the main broadcasting device becomes inoperable, the procedure for transferring the control activates the device with the local broadcasting devices based on data backed up by the main controller. This paper proposes an improved method of the conventional emergency broadcasting device duplication method. The existing method could not use the standby equipment in the normal state, but in the proposed method, the standby equipment can be used as local broadcasting equipment in usually. This method enables stable system operation while minimizing resource waste due to redundant configuration of expensive devices.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1207-1214
• /
• 2019

Technologies of the 4th industrial revolution have been unknowingly seeping into our lives. Many IoT based home security systems are using the convolutional neural network(CNN) as good biometrics to recognize a face and protect home and family from intruders since CNN has demonstrated its excellent ability in image recognition. In this paper, three layouts of CNN for 2D and 2.5D image of small dataset with various input image size and filter size are explored. The simulation results show that the layout of CNN with 50*50 input size of 2.5D image, 2 convolution and max pooling layer, and 3*3 filter size for small dataset of 2.5D image is optimal for a home security system with recognition accuracy of 0.966. In addition, the longest CPU time consumption for one input image is 0.057S. The proposed layout of CNN for a face recognition is suitable to control the actuators in the home security system because a home security system requires good face recognition and short recognition time.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.24-32
• /
• 2011

In ubiquitous environment, the analysis for student's learning behaviour is essential to provide students with personalized education. SCORM(Sharable Contents Object Reference Model), IMS LD (Instructional Management System Learning Design) standards provide the support function of learning design such as checking the progress. However, in case of applying these standards contain many problem to add or modify the contents. In this paper, We implement the system that manages the learner behaviour by hooking the event of web browser. Through all of this, HTML-based content can be recycled without any additional works and the problems by applying the standard can be improved because the store and analysis of the learning result is possible. It also supports the ubiquitous learning environment because of keeping track of the learning result in case of network disconnected.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.56-62
• /
• 2013

Recently with smart phones and tablets, next generation mobile communication systems have supported various multimedia contents services. Thus, multimedia communication systems have been gradually increased compared to voice communication systems. Since the growth of multimedia services has increased users' duration on systems and decreased systems' effectiveness on power, a study on effective usage of power needs to be researched. Furthermore, radio shadow areas under heavy urban environments have generated unnecessary power consumption which reduces the usage duration of power on next generation mobile communication systems. This paper has reviewed the communication network architecture on next generation mobile communication systems and the unnecessary power consumption in radio shadow areas. This paper has also proposed the method of the effective power usage and analyzed the effective power usage on next generation mobile communication systems with simulation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.767-780
• /
• 2015

In recent years, as smart phone penetration rate is growing explosively, new forms of cyber crime data is poured out beyond the limits of management system for cyber crime investigation. These new forms of data are collected and stored in police station but, some of data are not systematically managed. As a result, investigators sometimes miss the hidden data which can be critical for a case. Crime data is usually generated by computer which produces complex and huge data and records many logs automatically, so it is necessary to simplify a collected data and cluster by crime pattern. In this paper, we categorize all kinds of cyber crime and simplify crime database and extract critical clues relative to other cases. Through data mining and network-visualization, we found there is correlation between clues of a case. From this result, we conclude cyber crime data mining helps crime prevention, early blocking and increasing the efficiency of the investigation.