• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.269-279
• /
• 2022

Purpose: The purpose of this study is to develop a deep learning-based personal protective equipment detection model for disaster prevention at construction sites, and to apply it to actual construction sites and to analyze the results. Method: In the method of conducting this study, the dataset on the real environment was constructed and the developed personal protective equipment(PPE) detection model was applied. The PPE detection model mainly consists of worker detection and PPE classification model.The worker detection model uses a deep learning-based algorithm to build a dataset obtained from the actual field to learn and detect workers, and the PPE classification model applies the PPE detection algorithm learned from the worker detection area extracted from the work detection model. For verification of the proposed model, experimental results were derived from data obtained from three construction sites. Results: The application of the PPE recognition model to construction site brings up the problems related to mis-recognition and non-recognition. Conclusions: The analysis outcomes were produced to apply the object recognition technology to a construction site, and the need for follow-up research was suggested through representative cases of worker recognition and non-recognition, and mis-recognition of personal protective equipment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.405-412
• /
• 2022

This paper studies the method of estimating power loss and classifying the factors for improving the power generation efficiency through O&M. It is installed under various climatic conditions worldwide, operational and maintenance technologies suitable for the characteristics of the installation location are required. Existing studies related to solar power generation efficiency have been actively quantifying the impact on short-term losses by environmental factors such as high temperature, dust accumulation, precipitation, humidity, and wind speed, but analysis of the overall impact from a long-term operation perspective is limited. In this study, the potential for efficiency improvement was analyzed by re-establishing a loss classification system according to the power flow of solar power to derive a comprehensive efficiency model for long-term operation and estimating power loss through a case study for each region where climate conditions are classified. As a result of the analysis, the average annual potential for improving soiling loss was 26.9%, Death Valley 7.2%, and Seoul 3.8%. Aging losses was 6.6% in the 20th year as a cumulative. The average annual potential due to temperature loss was 2.9 % for Doha, 1.9% for Death Valley, and 0.2% for Seoul.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.248-256
• /
• 2021

After the COVID-19 pandemic, hand hygiene has become more important to prevent and reduce infection. To manage and provide water to ensure safe handwashing, water governance and the role of public servants are also getting critical. Many organizations have given their priority to capacity building of public servants. In the Strategic Plan for the ninth phase of the Intergovernmental Hydrological Programme (2022-2029), 'Water education in the Fourth Industrial Revolution' is included as a priority. In Korea, ODA in the field of water and sanitation is emphasized in Korea's 3rd Mid-term Strategy for Development Cooperation (2021-2025). Also, KOICA and various water-related organizations have been organizing water education programs for developing countries. This study presents the direction for water education for public servants in developing countries in the post COVID-19 through the education program cases of the International Centre for Water Security and Sustainable Management established by the agreement between the Korean government and UNESCO in 2017. The study suggests that water-related organizations should cooperate with each other to prevent duplication of water education contents. It also suggests that blended learning should be actively utilized for the improvement of education program effectiveness. Lastly, the study emphasizes that education demand for the water technologies related to the fourth industrial revolution and smart water management is increasing, which should be considered when water-related organizations create online content or design education programs.

• Journal of Convergence for Information Technology
• /
• v.11 no.5
• /
• pp.38-49
• /
• 2021

This study is single-group pretest-posttest design study to examine the effects of web-based cognitive training program using tablet on cognition and depression in the elderly with high risk of dementia or mild dementia living in a rural area, enrolled in dementia center. Intervention was provided to the 18 participants once a week for 10 weeks within 1 hour. Data was analyzed with SPSS 24.0 and interview data was categorized. The study result proves that after intervention, the participants' cognitive score increased significantly(Z=-3.35, p=.001) and the depression scores were significantly decreased(Z=-3.13, p=.002). Also, interview shows positive effect of the intervention on cognition and depression. It is necessary to improve access environment for smart devices so as not to be restricted by time and place, and to develop and apply various types of web-based programs for each cognitive level. Then, the intervention could be used as a cognitive training program incorporating information and communication technology for the prevention and management of dementia in rural areas.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.819-829
• /
• 2022

Professional baseball is one of the spectator sports that has been loved for a long time by the citizens as a recreational activity since its establishment in 1982, and has been playing pivotal role as a national sport. However, there has been decline in the number of audiences since 2019. Hence, this research paper aimed to provide strategic direction for planning and improvement of professional baseball stadiums by applying the concept of servicescape. In this research, five key factors of servicescape that affects players performance and the level of immersion of spectators were derived through literature review, and based on these key factors, case study analysis were carried out for 51 domestic and foreign baseball stadiums while focusing on the factors derived. Domestic baseball stadiums highly concentrate on spectatorship without effectively responding to change in spectators demand and its effective use of space rather than baseball games. As in foreign cases, it is critical to modify mangement process and planning direction, and improve policies while perceiving baseball stadium as recreational and cultural space.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.45-52
• /
• 2023

The power generation method using expensive diesel has operation problems such as high cost diesel generator and a lack of reserved power due to increase of power demand in some islands, requiring expansion of power generation facilities. To solve this problems, it is necessary to improve the efficiency of power generation facilities through an ORC(Organic Rankin Cycle) system application that uses waste heat as a heat source. Therefore, localized application technology of price competitive and highly reliable ORC power generation system is needed, and optimization technology of generators is having great effect, so this study performed two generator designs to get a high-efficiency generator with an optimized 30kW output. The comparison of simulation data for two designed models showed that a generator with SPM factor of 46.2% had an efficiency of 92.1% and a power ouput of about 23.2kW based on 12,000rpm, a generator with SPM factor of 44.46%, had a power output of 27.9kW and efficiency of 93.6% based on above rpm. For the verification of improved design model with SPM factor of 44.46%, the prototype test system with 110kW motor dynamometer was installed and got to the efficiency of 92.08% with conditions of the rated capacity 25kW at 12,000rpm, the test results of prototype generator showed the validity of generator design.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.1
• /
• pp.8-17
• /
• 2023

In conventional liquid crystal display(LCD) manufacturing process, Indium Tin Oxide(ITO) as transparent electrode and rubbing process of polyimide as alignment layer are essential process to apply electric field and align liquid crystal molecules. However, there are some limits that deposition of ITO requires high vacuum state, and rubbing process might damage the device with tribolectric discharge. In this paper, we made nanocomposite with PEDOT:PSS and MWNT to replace ITO and constructed alignment layer by nano imprint lithography with nano wrinkle pattern, to replace rubbing process. These replacement made that only one PEDOT:PSS/MWNT film can function as two layers of ITO and polyimide alignment layer, which means simplification of process. Transferred nano wrinkle patterns functioned well as alignment layer, and we found out lowered threshold voltage and shortened response time as MWNT content increase, which is related to increment of electric conductivity of the film. Through this study, it may able to contribute to process simplification, reducing process cost, and suggesting a solution to disadvantage of rubbing process.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.897-907
• /
• 2023

The purpose of this study is to find out the development direction of adult learners' blended learning class as a study on the class satisfaction of adult college students according to the blended learning class participation type. To this end, a survey was conducted targeting adult learners at two schools that are carrying out the LiFE project (lifelong education system support project). The analyzed research results are as follows. First, in the case of adult learners, the proportion of participating in liberal arts + major classes as a blended learning subject was 77.8%, and home was the highest with 69.8% as a place to participate in online classes. Second, satisfaction with the blended learning teacher/instructor teaching method was generally satisfied with 95.2% of average or higher. Third, 96.8% of the students answered 'yes' or higher regarding the level of satisfaction with the blended learning method. The above research results show that blended learning is one of the important teaching and learning methods in providing adult-tailored education to adult learners who combine work and study. It can be seen that the blended learning teaching method is an effective teaching method that enables interactive communication between the instructor and the learner rather than the one-way teaching-oriented content delivery class of the traditional classroom.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.519-531
• /
• 2024

The purpose of this study is to analyze the aspects and characteristics of educational innovation planned and implemented at the university site targeting universities in Busan, Ulsan, and Gyeongnam, and to explore their limitations and tasks. For this purpose, we analyzed the contents of innovation strategy programs among the plans of 17 universities in the national innovation support projects in Busan, Ulsan, and Gyeongnam area. First, the university innovation strategy was divided into input, process, infrastructure, and other factors, and among them, the process factor was divided into education, research, and industry-university cooperation to examine the aspects and characteristics of innovation. As a result of the study, the aspects of university innovation at universities in Busan, Ulsan, and Gyeongnam were analyzed in the areas of education, research, and industry-academia cooperation. Characteristics of innovation were emphasis on convergence education, competency development, smart system foundation, introduction of innovative teaching and learning techniques, consumer-centeredness, and regional linkage. The limitations and tasks of university innovation revealed through the research are as follows. First, a specialized university innovation business structure should be prepared in consideration of the context of local universities. Second, established strategies with high innovativeness must be implemented and sustained, and consensus among members is required for this. Third, the innovation of universities should not mean the centralization of academics, and the role and efforts of universities as a research institutions should be improved. Fourth, it should not be overlooked that more important than the visible innovation strategy of university innovation is the education innovation that occurs directly to students as a result of the education effect.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.2
• /
• pp.33-38
• /
• 2014

Purpose Auto exposure control (AEC) in SPECT/CT automatically controls the exposure dose (mA) according to patient's shape and size. The aim of this study was to evaluate the effect of AEC in SPECT/CT on exposure dose reduction and image quality. Materials and Methods The model of SPECT/CT used in this study was Discovery 670 (GE, USA), Smart mA for AEC; and $^{99m}Tc$ as a radioisotope. To compare SPECT and CT images by CT exposure dose variation, we used a standard technique set at 80, 100, 120, 140 kVp, 10, 30, 50, 100, 150, 200, 250 mA, and AEC at 80, 100, 120, 140 kVp, 10-250 mA. To evaluate resolution and contrast of SPECT images, triple line phantom and flangeless Esser PET phantom were used. For CT images, noise and uniformity were checked by anthropomrphic chest phantom. For dose evaluation to find DLP value, anthropomorphic chest phantom was used and the CT protocol of torso was applied by standard technique (120 kVp, 100 mA) and AEC (120 kVp, 10-250 mA). Results When standard and AEC were applied, the resolutions at SPECT images with attenuation correction (AC) were the same as FWHM by center 3.65 mm, left 3.48 mm, right 3.61 mm. Contrasts of standard and AEC showed no significant difference: standard 53.5, 29.8, 22.5, 15.8, 6.0, AEC 53.5, 29.6, 22.4, 15.7, 6.1 In CT images, noise values at standard and AEC were 15.4 and 18.5 respectively. The application of AEC increases noise but the value of coefficient variation were 33.8, 24.9 respectively, obtaining uniform noise image. The values of DLP at standard and AEC were 426.78 and 352.09 each, which shows that the application of AEC decreases exposure dose more than standard by approximately 18%. Conclusion The results of our study show that there was no difference of AC in SPECT images based on the CT exposure dose variation at SPECT/CT images. It was found that the increased CT exposure dose leads to the improvement of CT image quality but also increases the exposure dose. Thus, the use of AEC in SPECT/CT contributes to obtaining equal AC SPECT images, and uniform noise in CT images while reducing exposure dose.