• Journal of the Korea Convergence Society
• /
• v.6 no.1
• /
• pp.29-34
• /
• 2015

As smart grid techniques developed, public attention is concentrating on energy efficiency. So it is necessary to study on new renewable energy in order to manage the energy within micro grid consisting smart grid. Among them, small hydro energy has the advantage of being installable anywhere depending the amount of water used by the users within micro grid. This study examines if the measured value is appropriate for small hydro power generation by measuring generation quantity and operation rate of generator based on the sewage flow used by apartments and multi-unit dwellings where those users live. Some appropriate apartments and multi-unit dwellings generate electricity with small hydro generator using sewage as potential energy. This study intends to suggest more effective management by introducing energy management system and electricity storage device of micro grid.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.50 no.1
• /
• pp.45-49
• /
• 2013

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.572-575
• /
• 2011

It is well known that spanning tree protocol (STP) is the most commonly used protocol in switching networks for smart grid. STP selectively blocks redundancy links of the network to prevent layer 2 loops in network, and it also has a functionality of backing up links. As with the other protocols, STP has been updated with the continuing development of the network. STP is a broad concept and it does not just refer in particular to defined STP protocol in IEEE 802.1D standards, it refers to updated spanning tree protocol based on STP. Because of uneven distribution of communication traffic in root bridge, STP cannot satisfy fast converge nce while the failure occurs near the root bridge or on the root bridge in tree topologies of STP. In this paper, we propose a novel method --- Hyper Cube Spanning Tree Protocol (HCSTP) to solve uneven distribution of communication traffic. Theoretically, hyper cube in our protocol increases throughput and improves the utilization of communication. The simulation results show that HCSTP can achieve comparative and considerably higher performance than other STP protocols in terms of reconnection.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.567-572
• /
• 2011

As the mobile devices have powerful CPUs and memories, it is possible to carry the large volumes of design drawings, such as DXF files, on mobile devices. However, since the format of a DXF file is the ASCII, it has the shortcoming where the size of a file is larger than a binary formatted file and it is difficult to display the entities of drawings quickly on mobile devices. In this paper, we design the DXF manager system on a smart phone. To speed up the rate of the display and panning, the DXF manager hires the spatial index, the fixed grid file. We also implement the system on the Samsung Omnia-1$^{(R)}$ to exploit the Windows Mobile$^{(R)}$ operating system.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.231-232
• /
• 2016

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple. Based on the general circuit model of coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor of n-phase multi-winding coupled inductor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the duty ratio of steady-state operating point approaches 1/n, 2/n, ${\cdots}$ or (n-1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the duty ratio of steady-state operating point approaches either zero or one. Therefore, coupled inductors having optimal coupling factor can minimize the ripple current of inductor and inductor size.

• Journal of the Korea Convergence Society
• /
• v.1 no.1
• /
• pp.49-55
• /
• 2010

As the developing of the information communication technology, more and more devices are with the capacity of communication and networking. The convergence businesses which communicate with the devices have been developing rapidly. The IT convergence communication is viewed as one of the next frontiers in wireless communications. In this paper, we analyze detailed security threats against M2M(Machine to Machine), intelligent vehicle, smart grid and u-Healthcare in IT convergence architecture. We proposed a direction of the IT convergence security that imbedded system security, forensic security, user authentication and key management scheme.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.88-89
• /
• 2017

This paper investigates the design of multi-winding coupled inductor for minimum inductor current ripple in rapid traction battery charger systems. Based on the general circuit model of multi-winding coupled inductor together with the operating principles of dc-dc converter, the relationship between the ripple size of inductor current and the coupling factor is derived under the different duty ratio. The optimal coupling factor which corresponds to a minimum inductor ripple current becomes -(1/n-1), i.e. a complete inverse coupling without leakage inductance, as the steady-state duty ratio operating point approaches 1/n, 2/n, … or (n1)/n. In an opposite manner, the optimal coupling factor value of zero, i.e. zero mutual inductance, is required when the steady-state duty ratio operating point approaches either zero or one.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.161_162
• /
• 2009

'The Energy Independence and Security Act of 2007' 연방 법안이 2007년 12월 미국 의회 통과에 힘입어, 법안의 Title XIII에 포함된 '스마트그리드(Smart Grid)'는 다양한 연구 결과를 목표로 추진되고 있다. 스마트그리드는 IT를 기존 전력기술에 적용해 송전, 배전망을 지능형으로 만들자는 개념으로, 2003년 DOE가 발표한 2030년까지의 전력인프라 발전 계획인 '그리드2030(Grid2030)'의 실천 전략으로 볼 수도 있으며, 2008년부터 2020년까지 스마트그리드에 대한 연구개발, 시범사업 등을 국가 정책사업으로 추진한다는 내용을 담고 있다.[1] 이러한 장기간의 국책 사업들은 단기적으로 다양한 시범사업을 통하여 가상의 시뮬레이션이나 데모시스템 구현을 실시하여 교훈을 얻는 방식으로 진행된다. 시범 사업의 결과만으로는 유틸리티 전체의 전력망에 적용하는 것은 비용적인 측면에서나 안정적 전력 운영에 있어서 무리이기 때문에 연구 결과를 현재의 전력망과 조화롭게 점진적으로 배치시키는 과정과 상호 운용성 통합 과정이 필수적으로 따르게 된다. 본 논문에서는 스마트그리드 관련 국외 시범사업 및 관련 활동들을 살펴보고 IntelliGrid 프로그램에서 제시하는 자동화 아키텍쳐의 지능화시스템을 적용하기위한 현장 전개 방법을 고찰하고자 한다.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.1-10
• /
• 2013

The power industry is currently facing many challenges, due to the new environment created by the introduction of smart grid technologies. In particular, the large-scale deployment of electric vehicles (EVs) may have a significant impact on demand for electricity and, thereby, influence generation and transmission system planning. However, it is difficult to deal with uncertainties in EV charging loads using deterministic planning methods. This paper presents a two-stage stochastic decomposition method with Latin-hyper rectangle sampling (LHRS) to solve the integrated generation and transmission planning problem incorporating EV deployment. The probabilistic distribution of EV charging loads is estimated by Latin-hyper rectangle sampling (LHRS) to enhance the computational performance of the proposed method. Numerical results are presented to show the effectiveness of the proposed method.