• Journal of the Korean housing association
• /
• v.22 no.1
• /
• pp.65-73
• /
• 2011

The purpose of this study is to find out the characteristics of area and spatial elements according to the building size and provide the guidelines for space planning of the child care center. This study used the content analysis method and analysis was made on the floor plans for 51 cases and the floor plans were converted to Autocad drawings to analyze the area. The results of this study were as follows; 1) Child care centers over 70% were single-attached building types which made it possible for creating outdoor environments for children. However, most small-size centers which had under 50 children did not have the facilities for outdoor activities. 2) In terms of spatial elements, the basic spaces of the small-size center were the classroom, bathroom, kitchen, office and reference room. The medium or large size centers had extra rooms for special activities and service spaces in addition to the basic spaces. 3) Classroom area per child was 2.65 m2 on average. Space composition ratio on average for care, staff, and service was programmed by 57%, 9%, 34% respectively. Small-size center had relatively more care space when compared to the others. In the case of large-size centers, there was a tendency that service space was increased, but care space was decreased.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.11 no.2
• /
• pp.7-11
• /
• 2015

Recently, as the demand for sustainable energy sources is increasing, ground-source heat pump (GSHP) systems are receiving growing attention. However, the initial cost of GSHP system is higher than it of the conventional systems, especially, in small-size buildings. Therefore, for the application to the small-size building, it is necessary to develop small-size ground heat exchanger with small-size buildings. In this study, analysis of unit-type heat exchanger due to grouting materials. As a result, 1492.14 W of heat exchange rate was acquired in the condition of cement-silica sand-graphite materials.

• Journal of KIBIM
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2023

The number of old buildings in Korea is increasing. According to a report from the Ministry of Land, Infrastructure and Transport, the proportion of old buildings increased from 29.0% in 2005 to 37.8% in 2009. However, the ratio of repairs to improve usability and improve the environment through problem improvement The proportion of old buildings was 72% in 2010, but decreased to 38% in 2020 and does not exceed 40%. The reason is that the difficulty of remodeling old buildings is more difficult than repairing new ones, and business estimates are difficult to predict. Accurately reflecting the current condition of a building in a repair project has a huge impact on time and budget. Accurate and detailed measurements are essential. Current repair methodologies require a lot of manpower, time and money to remodel an old building. Therefore, it is necessary to improve the remodeling methodology applied in the field. In this study proposed a Digital-Twin-based remodeling process that introduced various digital technologies such as 3D Scanning, BIM, Reverse Engineering, and Digital Fabrictation in consideration of the latest technologies used in recent construction projects. In addition, the process proposed in this study was applied to an actual small-scale building remodeling project and the results were analyzed. In addition, useful basic data were provided for the establishment of plans related to the repair process of buildings in the future.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.241-244
• /
• 2005

Many building detection methods mainly rely on line segments extracted from aerial or satellite imagery. Building detection methods based on line segments, however, are difficult to succeed in high resolution satellite imagery such as IKONOS imagery, for most buildings in IKONOS imagery have small size of roofs with low contrast between roof and background. In this paper, we propose an efficient method to extract line segments and group them at the same time. First, edge preserving filtering is applied to the imagery to remove the noise. Second, we segment the imagery by watershed method, which collects the pixels with similar intensities to obtain homogeneous region. The boundaries of homogeneous region are not completely coincident with roof boundaries due to low contrast in the vicinity of the roof boundaries. Finally, to resolve this problem, we set up snake model with segmented region boundaries as initial snake's positions. We used a greedy algorithm to fit a snake to roof boundary. Experimental results show our method can obtain more .correct roof boundary with small size and low contrast from IKONOS imagery. Snake algorithm, building roof detection, watershed segmentation, edge-preserving filtering

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.206-207
• /
• 2022

Currently, safety accidents in construction area are managed regardless of the size. Therefore, the objective of this study is to conduct for developing the quantitative risk assessment according to large and small and medium-sized construction sites. The scope of this study is limited to the fall accidents which is the biggest accidents in the construction sites. the regression analysis was conducted based on the collected data. As a result, it was confirmed that there was a statistically significant difference between larce and small and medium-sized construction sites. This study is expected to be used as basic data for research on the development of a risk quantitative model for small and medium-sized construction sites in the future.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.81-87
• /
• 2018

Since February 2017, site managers in small architectural projects are required by the revised building act. In order to address issues for site managers and to improve project efficiency, system improving methods are surveyed and proposed in this study. The key inspection items in the existing surveillance guidance manual were investigated, and the checklist for site managers for a small to medium sized construction site was analyzed. This study also tries to propose using web-based site management systems for improvement of the utilization of checklists. It is expected that these on-site management systems, along with BIM technology, will be able to monitor the small size building construction project in real time and effectively monitor the various problems occurring on-site.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.461-468
• /
• 2005

In this paper, mixed mode magneto-rheological (MR) damper, which is applicable for vibration control of a small scale multi-story structure, is devised. First, the schematic configurations of the shear, flow, and mixed mode MR dampers are described with design constraints and then the analytical models to predict the field-dependent damping forces are derived for each type. Second, an appropriate size of the mixed mode MR damper is manufactured and its field-dependent damping characteristics are evaluated in time domain. Finally, the performance of the manufactured MR damper which is semi-actively applied to a small scale building excited by earthquake load, is numerically evaluated.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.115-116
• /
• 2015

Recently, most of the construction companies is being degraded due to the overall construction recession profitability. Among them, order quantity of the architectural and engineering firms are trend to decrease except for large companies over a certain size. In particular, small companies are facing more difficulties. This study was conducted expert interview method to extract the main cause of profitability degradation of a small-sized design engineering companies. And, we are proposes a critical influence factors through survey about extracted factors. The results of this study are expect to help the competitiveness of architectural design firm.

• Korean small business review
• /
• v.41 no.4
• /
• pp.1-36
• /
• 2019

The purpose of this study is to identify the relationships among purposes and contents of smart factory building and continuous utilization of smart factory. Specifically, this study identifies two types of purposes of smart factory building as follows: (1) improving productivity, (2) increasing flexibility. In this study, three aspects of smart factory building contents were suggested like this: (1) automation area (facility automation vs. work automation), (2) big data system focus (radical transformation vs. incremental improvement), and (3) value chain integration area (internal value chain integration vs. external value chain integration). In addition, we looked at how firm size moderates the purposes - contents - continuous utilization of smart factory relationship. A questionnaire survey was conducted on 151 manufacturing companies. More specifically, out of 151 companies, 100 are small-and-medium-sized enterprises and 51 large-sized enterprises. All questionnaires were targeted at companies with Smart Factory level above level 2. The analysis results of this study using Smart PLS statistical programs are as follows. First, the purposes of smart factory building including increasing productivity and flexibility had positive impacts on all of the contents of smart factory building. Second, all of smart factory building contents had positive impacts on the continuous use of smart factory except big data system for incremental improvement of manufacturing process. Third, the impacts of smart factory building purposes implementation on smart factory building contents varied depending on whether the purpose is productivity improvement or flexibility. Fourth, it was founded that firm size moderated the relationships of purposes - contents - continuous utilization of smart factory in such a way that large-sized firms tend to empathize the link between flexibility and smart factory building contents for continuous use of smart factory, while small-and-medium-sized-firms emphasizing the link between productivity and smart factory building contents. Most of the previous studies have focused on presenting current smart factory deployment cases. However, it is believed that this research has made a theoretical contribution in this field in that it established and verified a research model for the smart factory building strategy. Based on the findings from a working-level perspective, corporate practitioners also need to have a different approach to smart factory building, which should be emphasized depending on whether their purpose of building smart factory is to increase productivity or flexibility. In particular, since the results of this study identify the moderating effect of firm size, it is deemed necessary for firms to implement a smart factory building strategy suitable for their firm size.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.107-115
• /
• 2017

Recently, much attention in building smart factory have been dramatically increased. Despite the growing interest in smart factory, few guidelines exist how to successfully build smart factory. The purpose of this study is to investigate successful cases in building smart factory in Korea. Drawing on the analysis of successful cases, we suggest the valuable guidelines and directions toward success of smart factory. As a result, in the case of large-size firms, it is an effective strategy that expanding from a model factory to whole factory for successful smart factory building. In addition, in the case of medium and small-size firms, it is an effective strategy that upgrading from low-level step to high-level step for successful smart factory building. Therefore, this study provides companies and government with specific and practical success strategies as well as industrial policy improvements.