• The Journal of Advanced Prosthodontics
• /
• 제15권3호
• /
• pp.101-113
• /
• 2023

PURPOSE. This randomized controlled trial aimed to evaluate the effect of implants' two different diameters and cantilever lengths on the marginal bone loss and stability of mplants supporting maxillary prostheses. MATERIALS AND METHODS. Ninety-six implants were placed in sixteen completely edentulous maxillary ridges. Patients were randomly divided into two groups: Group A, implants were placed with a cantilever to anterior-posterior AP spread length (CL:AP) at a ratio of 1:3; Group B, implants were placed with a CL:AP at a ratio of 1:2. Patients were further divided into four sub-groups: Groups A1, A2, B1, and B2. Groups A1 and B1 received small diameter implants while Groups A2 and B2 received standard diameter implants. Bone height and stability measurements around each implant were performed at 0, 4, 8 and 24 months after definitive prostheses delivery. RESULTS. Statistical analysis of the mean implant stability and height values revealed an insignificant difference between Group A1 and Group A2 at all the different time intervals while significantly higher values in Group B1 in comparison with Group B2. Results also showed significantly higher values in Group A1 in comparison with Group B1 and an insignificant difference between Group A2 and Group B2 at all the different time intervals. CONCLUSION. It can be concluded that the use of small diameter implants placed with a CL:AP at a ratio of 1:3 provided predictable results and that the 1:2 CL:AP significantly induced more critical bone loss in the small diameter implants group, which can significantly reduce long term success and survival of implants

• 대한심미치과학회지
• /
• 제31권2호
• /
• pp.56-63
• /
• 2022

하악 4전치 수복은 치아가 작고 공간도 좁아서 지대주 선택에 어려움이 따른다. 치주적으로 좋지 못한 상황에서 치아를 발거하는 경우가 대부분이고, 이러한 경우 치간공극을 크게 열어주는 것이 구강위생 관리 측면에서 유리하다1. 커스텀 지대주로 아무리 작은 직경으로 포스트 부위를 만든다 해도, 스크류가 들어가는 공간 때문에 작은 직경으로 지대주의 포스트 부위를 만드는 것에는 한계가 있다. One body implant2의 경우, post 부위를 넓은 정면으로 설정하는 것 보다는, 보다 d 얇은 측면(90도 회전면)으로 설정하는 것이 치간공극 형성을 위해 유리하다. Internal bone level implant 활용 시 two piece abutment를 활용하는 것 보다, one-piece abutment를 활용한다면 더 효과적으로 치간공극을 위한 공간을 확보할 수 있다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.30.1-30.6
• /
• 2016

Background: The prognosis of wide implants tends to be controversial. While wider implants were initially expected to result in a larger osseointegration area and have higher levels of primary stability, they were reported to have a relatively high rate of failure. The clinical outcome of ultrawide implants of more than 6 mm in diameter was evaluated through a retrospective study. Methods: The investigation was conducted on patients who had received ultrawide implant (${\geq}6mm$ diameter) placements in Seoul National University Bundang Hospital from January 2008 to December 2013. Complications were investigated during the maintenance period, and marginal bone loss was measured using periapical radiography. Primary stability immediately after the implant placement and second stability after second surgery or during impression were measured using $Osstell^{(R)}$ Mentor (Osstell, Sweden) as an implant stability quotient (ISQ). Results: Fifty-eight implants were placed in 53 patients (30 male, 23 female), and they were observed for an average of $50.06{\pm}23.49$ months. The average ISQ value increased from $71.22{\pm}10.26$ to $77.48{\pm}8.98$ (P < 0.005). The primary and secondary stability shows significantly higher at the mandible than at the maxilla (P < 0.001). However, mean survival rate shows 98.28 %. Average marginal bone loss of 0.018 and 0.045 mm were measured at 12 and 24 months after the loading and 0.14 mm at final follow-up date (mean 46.25 months), respectively. Also in this study, the bone loss amount was noticeably small compared to regular implants reported in previous studies. Conclusions: The excellent clinical outcome of ultrawide implants was confirmed. It was determined that an ultrawide implant can be used as an alternative when the bone quality in the posterior teeth is relatively low or when a previous implant has failed.

• The Journal of Advanced Prosthodontics
• /
• 제4권3호
• /
• pp.158-161
• /
• 2012

PURPOSE. The aim of the present study was to evaluate if a smaller morse taper abutment has a negative effect on the fracture resistance of implant-abutment connections under oblique compressive loads compared to a conventional abutment. MATERIALS AND METHODS. Twenty morse taper conventional abutments (4.8 mm diameter) and smaller abutments (3.8 mm diameter) were tightened (20 Ncm) to their respective implants ($3.5{\times}11$ mm) and after a 10 minute interval, implant/abutment assemblies were subjected to static compressive test, performed in a universal test machine with 1 mm/min displacement, at $45^{\circ}$ inclination. The maximum deformation force was determined. Data were statistically analyzed by student t test. RESULTS. Maximum deformation force of 4.8 mm and 3.8 mm abutments was approximately 95.33 kgf and 95.25 kgf, respectively, but no fractures were noted after mechanical test. Statistical analysis demonstrated that the evaluated abutments were statistically similar (P=.230). CONCLUSION. Abutment measuring 3.8 mm in diameter (reduced) presented mechanical properties similar to 4.8 mm (conventional) abutments, enabling its clinical use as indicated.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.149-153
• /
• 2011

Purpose: The aim of the present study was to evaluate the clinical outcome of resorbable blasting media surface tapered implant. Methods: 169 Osstem$^{(R)}$ GS III dental implants in 73 patients who received implant treatments at Seoul National University Bundang Hospital, were included in this study. The incidence of biological and prosthetical complications has been carefully analysed for each implant. Results: The short-term implant survival rate was 97.63%, success rate 94.7%. The prevalence of biological complications was 15.38% and the prevalence of prosthetic complications was 13.04%. The mean value of crestal bone loss was $0.28{\pm}0.57$ mm. The relationship between loading periods and marginal bone loss was small and not statistically significant. In mandible, marginal bone loss was larger than in maxilla, no statistically significant. Also, length and diameter of implant had no relationship with marginal bone loss. Conclusion: We suggest that this implant system could achieve successful and stable results.

• 대한치과교정학회지
• /
• 제36권4호
• /
• pp.275-283
• /
• 2006

작은 크기의 교정용 미니임플랜트는 교정적 고정원으로 널리 이용되고 있다. 그러나 빈번히 탈락하는 단점이 있어 이를 개선하기 위해 안정성을 향상시키기 위한 다양한 연구가 시도되어 왔다. 이 연구의 목적은 이중 피치와 직경에 관련하여 미니임플랜트의 안정성에 대한 기계적 성질을 비교 분석하는 것이다. 미니임플랜트의 길이는 8 mm였으며, 피치는 단일 피치형과 이중 피치형, 직경은 1.4 mm와 1.6 mm로 단일 피치형 1.4 mm, 단일 피치형 1.6 mm, 이중 피치형 1.4 mm, 이중 피치형 1.6 mm 등 총 4군으로 구성되었다. 각 군은 20개의 미니임플랜트로 구성되었고, 균일한 밀도의 polyurethane foam에 삽입 후 제거하였다. 시간에 따른 삽입 및 제거 토크의 변화와 각각의 최대 토크 등을 측정하여 기계적 성질을 비교 분석하였다. 이중 피치형은 단일 피치형보다 유의성 있게 더 낮은 최대 삽입 토크와 더 큰 최대 제거 토크를 보여주었다. 직경 1.6 mm는 1.4 mm보다 유의성 있게 더 큰 최대 삽입 토크와 최대 제거 토크를 보여주었다. 이중 피치형 1.4 mm군은 삽입 시에는 유의성 있게 가장 낮은 최대 삽입 토크를 보여주었으며 제거 시에는 단일 피치형 1.6 mm군보다 높거나 비슷한 최대 제거 토크를 보여주었다. 특히, 이중 피치형군은 최대 제거 토크 후 지속적으로 높은 제거 토크를 보여주었다. 미니임플랜트의 기계적 안정성은 이중 피치에 의해 향상될 수 있으며, 상부의 미세 나사산은 작은 직경에서도 풀림 토크에 저항하는 기계적 안정성을 향상시킬 수 있을 것으로 보인다.

• 구강회복응용과학지
• /
• 제29권2호
• /
• pp.111-118
• /
• 2013

본 연구는 삼차원적 유한요소분석을 통하여 연결부 형태가 다른 두 가지 scallop 임플란트의 경부 나사선 피치가 응력 분포에 미치는 영향을 간접적으로 확인하고자 하였다. 4가지 경부 나사선 피치 (0.4mm, 0.5mm, 0.6mm, 0.7mm)를 갖는 scallop 임플란트를 두 가지 다른 연결부 형태 (platform matching connection, platform mismatching connection)로 지대주와 연결되는 유한요소모형을 설계하였다. 8개의 모든 모델에 100N의 하중을 수직 및 30도 경사 방향으로 인가하여, 임플란트, 지대주, 그리고 치조골에 가해지는 최대등가응력을 분석하였다. 유한요소분석결과 응력은 치밀골에 집중되었다. 작은 나사 피치가 설계된 platform mismatching connection 모델에서 수직 방향과 경사하중 시 최대등가응력이 가장 낮게 나타났다. 측정되었다. Platform matching connection 모델에서는 경사하중의 경우 0.6mm, 수직하중의 경우 0.4mm 나사 피치에서 가장 낮은 최대등가응력을 보였다. 따라서 scallop 임플란트에서 platform mismatching connection은 최대등가응력을 감소시키는 데 중요한 역할을 하며, 경부 나사 피치가 작을수록 최대등가응력이 감소되는 경향을 보임을 알 수 있었다.

• 대한치과보철학회지
• /
• 제42권5호
• /
• pp.597-607
• /
• 2004

Purpose: This study was peformed to investigate the retrievability of the cemented crown from the cementation type implant abutment. Material and method: The cementation type implant abutments (NEOBIOTECH implant abutment regular, 3 degree taper, 10mm length, 4mm diameter, Ti grade III, machined surface. Hwasung, Kyunggi-do) and cemented crowns were divided into 3 groups, depending on their hole angles formed in the crowns for their retrievability. The abutments and crowns were luted with 4 kinds of cements and separation test using metal wedge was executed with Instron 4465 Universal Testing Machine and the maximum impact force of the modified crown ejector was measured. Results and conclusion : 1. All of the cementation type implant abutments and cemented crowns were separated with relatively small force by metal wedge. 2. The retrieving force was minimum when the metal wedge was applied perpendicular to the axis of abutment. 3. The force for retrieving crowns from abutments was maximum in resin cement group, and reduced in orders of zinc phosphate cement, glass ionomer cement and zinc oxide eugenol cement. 4. The maximum force obtained by the crown ejector was higher than the retrieval force in ZOE and GI cement and lower than that in ZPC and resin cement. 5. If it has similar conditions clinically, the cemented crowns luted with 2 types of cements (ZOE, GI cement) can be safely retrieved from the cementation type implant abutments by the modified crown ejector.

• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.29-37
• /
• 2011

연구 목적: 양악 총의치를 사용 중인 환자를 대상으로 하악에 4개의 작은 직경의 임플란트를 식립하여 implant supported overdenture로 전환 시 환자의 만족도 (저작, 유지, 발음, 심미, 사회적 문제, 심리적 문제)를 평가하였다. 연구 재료 및 방법: 60세 이상의 완전 무치악 환자 중 상하악 총의치를 장착한 환자를 대상으로 하였다. 수술 전에 진단 스텐트를 이용한 방사선 사진 (CT, panorama) 촬영을 시행하고 현재 사용하고 있는 의치에 대한 만족도에 대해 조사하였다. 그 후 하악 이공 전방부에 4개의 mini dental implant 식립 및 immediate loading 후 방사선 사진 촬영을 하였다. 식립 1달 후와 3달 후에 방사선 사진을 촬영하였으며 수술 전과 동일한 설문지를 통한 overdenture 사용 시 만족도 조사하였다. 결과: 현재 9명의 환자를 대상으로 시행하였다. 1. 총 36개의 임플란트를 식립하였으며 이중 1개의 임플란트가 실패하여 97.2%의 생존률을 보였다. 2. 임플란트 식립 전, 후 만족도 비교는 oral health impact profile 49를 이용한 설문 조사를 통해 이루어 졌다. 저작 시 불편감, 유지, 발음, 심미, 사회적 활동시 불편감, 심리적 불편감 등으로 비교 분석하였으며 5점 기준으로 불편감이 심할 수록 낮은 점수를 부여하였다. 그 결과 전반적으로 만족도가 상승하였다. 그 중 유지력 면에서 가장 크게 만족도가 상승하였으며 사회활동시 불편감, 심리적 불편감, 저작시 불편감, 심미, 발음 순으로 개선되었다. 결론: 이번 연구를 통하여 mini dental implant를 이용한 의치를 사용시 환자의 만족도가 높아진 것을 볼 수 있었다. 추 후 좀 더 많은 환자를 통해 장기간 연구를 할 예정이며 추가적인 방사선 사진을 촬영하여 임플란트 주위 골 소실 여부를 관찰할 예정이다.

• 대한치과보철학회지
• /
• 제44권6호
• /
• pp.722-733
• /
• 2006

Statement of problem. The use of small diameter implants having less than 3 mm in diameter were restricted because of lack of bonding strength to bone. Purpose. The purpose of this study was to observe how much resorbable blast media pin implants increase the binding force to the bone compared to machined transitional pin implants by measuring removal torque, and whether they can be used as final implants for replacement of small diameter teeth. Material and method. Fifteen rabbits were used in this study. Two kinds of implants (resorbable blast media pin implants and machined transitional pin implants) were inserted in each tibia bicortically. After healing time of 2, 4 and 8 weeks, the removal torque values were recorded and the rabbits were sacrificed for histological analysis. Linear finite element method analyses were conducted to compare bicortical fixation with monocortical fixation. Result and conclusion. Within the limitation of this in vivo study, the following conclusions were drawn: 1) The removal torque value of RBM pin implants showed statistically significant increase compared to machined pin implants at 2, 4, and 8 weeks respectively (p<0.05). 2) The removal torque value of RBM pin implants at 2, 4, and 8 weeks was increased statistically significantly with time (p<0.05). 3) Bicortical fixation showed better stress distribution compared with monocortical fixation in a linear finite element method analysis. 4) RBM pin implants are not recommended as transitional implants because they showed a lot of bone fracture in histologic specimens.