• Journal of the Korean GEO-environmental Society
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2023

In this study, the performance of the support modular system, as substructure of the proposed sustainable-perpetual modular road system to reduce road construction time and maintenance costs was evaluated. A modular road system consisting of 4 support modular cross-beams with a lower curved surface was constructed on the test-bed. Six load cells and eight LVDTs were installed in the center part of two cross-beam support modular systems. Two loads, 50kN and 100kN, were applied to 15 points on the pavement slab to measure the load and displacement occurring in the modular road system. The measured displacements were less than 1 mm, so it is considered that there was no problem in the stability of the actual road. When comparing the two applied loads and the measured loads in the field test, it was considered that the load transmitted to the ground under the support modular system is very small. It is considered that the modular road system with the support modular system is applicable to the actual road site.

• Design Convergence Study
• /
• v.15 no.5
• /
• pp.55-70
• /
• 2016

Multi shopping malls provide us new life-style nowadays with the term, malling. Multi shopping malls are consisted of selling space, entertainment space and convenience space so that arrangement and circulation planning of each facilities have large influence to users. Based on this influences, this study aims to provide basic data for multi shopping malls' circulation planning. Therefore, this study selected 6 multi shopping malls in Seoul and conducted survey that satisfaction of circulation planning of multi shopping malls. For user satisfaction investigation, we studied concept of multi shopping mall following Korean building act and selected composition and characteristics of circulation. Also, we classified the malls to size and circulation shapes for comparison of the satisfaction results. Classified types are high-rise and low-rise and they are separated to small size and big size. In addition, classified circulation shapes are categorized to net type, loop type, cyclical loop type and multi type by forms of central space and main stream of the malls.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.269-278
• /
• 2022

Utilization of high-voltage electrolyte additive(s) at a small fraction is a cost-effective strategy for a good solid electrolyte interphase (SEI) formation and performance improvement of a lithium-rich layered oxide-based high-energy lithium-ion cell by avoiding the occurrence of metal-dissolution that is one of the failure modes. To mitigate metal-dissolution, we explored fluorinated dual-additives of fluoroethylene carbonate (FEC) and di(2,2,2-trifluoroethyl)carbonate (DFDEC) for building-up of a good SEI in a 4.7 V full-cell that consists of high-capacity silicon-graphite composite (15 wt% Si/C/CF/C-graphite) anode and Li_1.13Mn_0.463Ni_0.203Co_0.203O₂ (LMNC) cathode. The full-cell including optimum fractions of dual-additives shows increased capacity to 228 mAhg^-1 at 0.2C and improved performance from the one in the base electrolyte. Surface analysis results find that the SEI stabilization of LMNC cathode induced by dual-additives leads to a suppression of soluble Mn²⁺-O formation at cathode surface, mitigating metal-dissolution event and crack formation as well as structural degradation. The SEI and structure of Si/C/CF/C-graphite anode is also stabilized by the effects of dual-additives, contributing to performance improvement. The data give insight into a basic understanding of cathode-electrolyte and anode-electrolyte interfacial processes and cathode-anode interaction that are critical factors affecting full-cell performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.605-609
• /
• 2006

In this study, two kinds of smart accelerometers are investigated for the application of smart sensors to the structural health monitoring of infrastructures. Smart optical Fiber Bragg Grating (FBG) type and Micro-Electo-Mechanical System (MEMS) type accelerometers are selected for this study and the high sensitive ICP type accelerometer is used for the reference sensor. Small size shaking table tests were performed with 3-story shear building model using random input ground motions. The output only modal identification was carried out using stochastic subspace identification and the performances of sensors are compared in modal domain indirectly. The modal sensitivity method was applied to update the story stiffness of numerical model and the updated results were verified using the additional experiments for the same structure with additional mass.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.450-453
• /
• 2015

The Construction Engineering Industry (CEI) is construction field based on professional knowledge, staff and information service, and is distinguished by construction activity. The contemporary CEI market has extended globally and diversified construction work classifications. International construction engineering companies now have an important economic and social effect. Over the last five years (2009 to 2013), the top-200 global engineering firms reported global revenue that grew from 54.4 billion to 71.5 billion, about 27% growth (ENR, 2014). Countries such as the U.S.A., Canada, those in Europe (Several developed countries, i.e., United Kingdom, Netherlands, France, Spain, France, Italy, and Spain), Australia, Japan, China, and Korea comprise the bulk of world construction engineering revenue. Although the construction engineering market continues to grow, much of the work is limited to Europe, mid-Asia, and Asia. Additionally, specific construction types are focused on building projects, industrial plants, and refining plants. As such, there are imbalances in the construction engineering market and some market saturation. Further, there is heavy competition and the construction engineering market may shrink in the future. This paper analyzed various factors affecting the construction engineering market, specifically looking at construction classifications and factors related to a global market. To accomplish this, we collected to data from Engineering News Record (ENR) and recast each variable. And we used nonparametric statistics because the number of cases were small, making it difficult to assume a case's population parameter. Then we tested with the Kruskal-Wallis test and drew results. The results indicate that concentration in particular construction types and extending global regional markets will be have a positive effect on the overall global construction engineering market..

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.9-15
• /
• 2023

Compaction is performed in civil engineering sites to secure the stability of the ground and prevent settlement. While the process of compaction is crucial, it is also essential to evaluate the degree of compaction after the completion of the process. In domestic sites, the evaluation of compaction is mainly conducted on a small number of spot using point-based tests such as plate load tests and sand cone tests. The methods presented so far allow assessment of surface compaction, but evaluating compaction in deeper layers poses challenges. Moreover, due to the limited coverage of point-based testing, it is difficult to achieve an overall assessment of compaction. As a solution to these issues, the Spectral-Analysis-of-Surface-Waves (SASW) tests were utilized to evaluate compaction. SASW tests offer a broader measurement range compared to point-based tests, and depending on the test setup, this method can provide the stiffness of the ground at greater depths. In this study, SASW tests were conducted in a compacted soil site under different conditions to assess compaction. Additionally, Nuclear Density Gauge tests were conducted concurrently to compare and verify the results of SASW. The research results confirmed the feasibility of evaluating compaction using SASW at the geotechnical site.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.135-136
• /
• 2023

This study is an empirical result for building an onboard communication network using metal surface wave communication and is a consideration of its application within the ship. Over the past three years, the applicability and the performance of metal surface wave communication has been confirmed by testing on five small and medium ships. In the tests, IEEE 802.11 protocol of Wi-Fi was used, and the signals were generated in the form of surface waves. Data was sent from AP to AP in the point-to-point form, and the transmission speed was measured at the same time. If necessary, additional repeaters were used to extend the transmission distance. As derived a transmission speed of 5 to 100 Mbps in wireless communication restricted areas of the 5 ships, it is believed that it is possible to reduce the weight of ships and costs by eliminating the communication cables by using surface wave communication as the back-bone network on ships.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.1-12
• /
• 2024

Betung bamboo (Dendrocalamus asper) is used as a building and handicraft material in Indonesia; however, bamboo needs to be dried to increase its stability. This study aimed to evaluate the efficiency of drying bamboo using solar energy and different drying oven designs. The betung bamboo pieces were dried using a direct solar dryer (direct drying) and an indirect solar dryer (indirect drying) and then the decrease in levels that occurred based on the relative humidity (RH) and temperature values achieved in the two dryers were compared. The highest average temperature in the direct indirect drying oven compartment was 60.1 ± 13.1℃ with 19.9 ± 16.4% RH and 60.2 ± 11.9℃ with 19.5 ± 15.5% RH, respectively. The drying defect in indirect drying was lower than that in direct drying, and indirect drying had a 61.7% greater average water loss than direct drying with significant difference (95%, analysis of variance) based on water loss/compartment volume parameters. Thus, the solar drying oven can be used to air-dry bamboo (14%) for 7 d from an initial moisture content of 70%-80% in bamboo strips. The results of this research can be used for small-scale bamboo processing industries that have limited use of electrical energy with quite good results.

• Advances in concrete construction
• /
• v.17 no.2
• /
• pp.75-92
• /
• 2024

High Strength steel reinforced Reactive Powder Concrete (RPC) Beam is a new type of beams which has evident advantages than the conventional concrete beams. However, there is limited research on the shear bearing capacity of high-strength steel reinforced RPC structures, and there is a lack of theoretical support for structural design. In order to promote the application of high-strength steel reinforced RPC structures in engineering, it is necessary to select a shear model and derive applicable calculation methods. By considering the shear span ratio, steel fiber volume ratio, longitudinal reinforcement ratio, stirrup ratio, section shape, horizontal web reinforcement ratio, stirrup configuration angle and other variables in the shear test of 32 high-strength steel reinforced RPC beams, the applicability of three theoretical methods to the shear bearing capacity of high-strength steel reinforced RPC beams was explored. The plasticity theory adopts the RPC200 biaxial failure criterion, establishes an equilibrium equation based on the principle of virtual work, and derives the calculation formula for the shear bearing capacity of high-strength steel reinforced RPC beams; Based on the Strut and Tie Theory, considering the softening phenomenon of RPC, a failure criterion is established, and the balance equation and deformation coordination condition of the combined force are combined to derive the calculation formula for the shear bearing capacity of high-strength reinforced RPC beams; Based on the Rankine theory and Rankine failure criterion, taking into account the influence of size effects, a calculation formula for the shear bearing capacity of high-strength reinforced RPC beams is derived. Experimental data is used for verification, and the results are in good agreement with a small coefficient of variation.

• Korean small business review
• /
• v.42 no.2
• /
• pp.69-92
• /
• 2020

This study is aimed at the growth and development of family businesses that greatly contribute to Korea's economic development, but the specific research purpose is to firstly examine the research trends and current status of Korean family businesses and compare them with those of developed countries such as the United States. Second, I would like to look at the future research for revitalizing Korean family business research. In addition, we intend to contribute to increasing the interest in this field and the number of researchers involved. The research target of this paper is 212 papers published in professional academic journals for 13 years from 2006 to 2018 when family businesses began to be fully researched in Korea, 112 master's and doctoral dissertations (graduate schools), and 324 totals. As a result of empirical analysis, the number of published papers is increasing more than the initial ones, but it has been on the decline recently. In addition, 57.5% of the journals are papers that do not have specific definitions or simply list the claims of several scholars by analyzing content. Thesis was 33.9%. As for the type of research, qualitative research, which is a conceptual research, is a small number, and empirical research occupies most of the research topics. Research topics and academic dissertations also have a large proportion of management, management strategy, succession, financial accounting, and business performance. In other words, it can be said that the research on family business in Korea corresponds to the early childhood of the United States. First of all, in the future, we need to put more effort into increasing the qualitative research, starting with the definition of a family business, which is an essential problem, in addition to the theory building of family business. Second, as an analysis level of research, we should make family an important level of analysis for existing individuals, groups, and organizations. Third, the research subject and research area should be expanded. It is desperately necessary to study large companies including chaebols, mainly from small and medium-sized companies, which are the existing research areas of family business. In addition, it is considered that it is necessary to appropriately introduce various theories suitable for the interdisciplinary study, which is the characteristic of the family business, for example, theories of family science, psychology, and sociology. Fourth, it should build the research infrastructure.