• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.67-74
• /
• 2004

Laser heat treatment is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_2$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching action to occur and the formation of matrensitic structure. In this investigation, the microstructrual features occurring in Nd:YAG laser hardening SM45C and $STD_11$ steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimisation of the processing parameters for maximum hardened depth of SM45C and $STD_11$ steel specimens of 10mm thickness by using CW:YAG laser.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.248-250
• /
• 2006

The study on a surface transformation hardening of a rod-shaped SM45C carbon steel is carried out by using CW Nd:YAG laser. Conventionally, $CO_2$ laser has been usually used as a laser source for a transformation hardening. however, it is needed to an additional absorbent coating like a colloidal graphite owing to a lower absorbtion rate. On the other hand, no cost and post-removal process of coating is required to Nd:YAG laser, due to a higher absorbtion rate relatively. Moreover, there is a merit which is capable of building up the more flexible processing system resulted from a beam delivery through a optical fiber. In this study, we were going to recognize characteristics of a transformation hardening using a optic head with a gaussian beam distribution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1898-1904
• /
• 2003

Laser heat treatment is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_{2}$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of matrensitic structure. In this investigation, the microstructrual features occurring in Nd:YAG laser hardening SM45C and $STD_{11}$ steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimisation of the processing parameters for maximum hardened depth of SM45C and $STD_{11}$ steel specimens of 10mm thickness by using CW Nd:YAG laser.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1752-1762
• /
• 2016

To achieve higher reliability in the modular multilevel converters (MMC) for HVDC transmission systems, the internal condition of the DC capacitors of the submodules (SM) needs to be monitored regularly. For an online estimation of the SM capacitance, a controlled AC current with double the fundamental frequency is injected into the circulating current loop of the MMC, which results in current and voltage ripples in the SM capacitors. The capacitor currents are calculated from the arm currents and their switching states. By processing these AC voltage and current components with digital filters, their capacitances are estimated by a recursive least square (RLS) algorithm. The validity of the proposed scheme has been verified by simulation results for a 300-MW, 300-kV HVDC system. In addition, its feasibility has been verified by experimental results obtained with a reduced-scale prototype. It has been shown that the estimation errors for both the simulation and experimental tests are 1.32% at maximum.

• 보존과학회지
• /
• 제21권
• /
• pp.89-100
• /
• 2007

경상도지역의 두동리, 백련리, 사촌리 가마터 출토 백자편 총 47점에 대하연 중성자방사화분석으로 태토의 미량성분 함량을 측정하고 주성분분석(PCA)과 판별분석(LDA)으로 통계처리하여 가마터별 산지 및 특성을 분류해보았다. 주성분분석과 판별분석에서 이용한 미량성분은 17개(Ba, Ce, Co, Cr, Cs, Dy, Eu, Hf, La, Lu, Rb, Sc, Sm, Ta, Th, V, Yb) 원소이며, 분류에 기여한 원소는 6개(Dy, Sm, La, Ce, Lu, Sc) 원소로 확인된다. 가시적 특징에 따라 구분되는 연질과 경질백자는 미량성분의 화학적 조성이 유사하여 원료의 조성 차이가 없는 것으로 확인되나, 양질(I)과 조질백자(II)는 화학적 조성에 차이가 나타남에 따라 원료의 채취 장소나 수비와 첨가제 사용의 제작 과정에 차이가 있었을 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.99-106
• /
• 2006

High velocity oxygen-fuel thermal spray coating of the WC-Co cermet material is a well-established process for modifying the surface properties of the structural components exposed to the corrosive and wear attacks, and also these coating are well-known method to improve the fatigue strength of material. In this study, HVOF coated SM490B are prepared to evaluation of the effect of coating on tension and fatigue crack growth behavior. The pre-crack of the fatigue crack growth test specimens machined at deposited material area, heat affected zone and boundary, respectively. Through these test, the following results are obtained: 1) Tensile strength was about 498 MPa, and fracture occurred on base metal area. 2) The fatigue crack of coated specimens propagated more rapidly than non-coated specimen in all specimens. 3) In the same coating thickness specimens, the specimens with pre-crack at boundary more rapidly propagated than the specimens with pre-crack at HAZ and deposited material area. These results can be used as basic data in a structural integrity evaluation of rolled SM490B weldments considering HVOF coating.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.180-181
• /
• 2006

As a rule, high temperature superconducting coated conductors have multi-layered buffers consisting of seed, diffusion barrier and cap layers. Multi-buffer layer deposition requires longer fabrication time. This is one of main reasons which increases fabrication cost Thus, single buffer layer deposition seems to be important for practical coated conductor process. In this study, a single layered buffer deposition of $CeO_2$ for low cost coated conductors has been tried using thermal evaporation technique 100nm-thick $CeO_2$ layers deposited by thermal evaporation were found to act as a diffusion layer. $0.4{\mu}m$-thick SmBCO superconducting layers were deposited by thermal co-evaporation on the $CeO_2$ buffered Ni-W substrate. Critical current of 118A/$cm^2$ was obtained for the SmBCO coated conductors.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.207-210
• /
• 1998

풋고추를 수확한 다음 신선도를 유지할 수 있도록 하기 위하여 산소와 이산화탄소의 투과도가 서로 다른 LDPE, SM250, CPP 및 MPD의 4가지 포장재를 사용하여 풋고추를 포장한 다음 1$0^{\circ}C$에서 저장하면서 품질특성을 측정하였다. LDPE로 포장한 시험구는 일반적으로 고추의 저장에 적합하다고 알려진 산소 농도 3-5%, 이산화탄소 농도 5% 이하의 공기 조성을 유지하였으며, 무게, ascorbic acid 함량 및 총균수에 있어서도 다른 포장재료에 비하여 우수한 특성을 나타내어 풋고추의 신선도를 유지하는 데에 적합한 플라스틱 포장재로 생각되었다.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.766-771
• /
• 2008

We fabricated single cells with a cathode consisting of a $LaNi_{0.6}Fe_{0.4}O_3-Ce_{0.8}Sm_{0.2}O_{1.9}$ composite (LNF-S20DC composite) active layer and an LNF current collecting layer on a ${0.89ZrO_2}-{0.10Sc_2}{O_3}-0.01{Al_2}{O_3}$ electrolyte sheet. The cathode layers were prepared by the screen-printing method. The cathode properties of these cells were measured by the AC impedance method at $800^{\circ}C$. The cathodes with the ceria-LNF composite active layer exhibited high power performance prior to current loading. We investigated the influence of the mixture ratio of LNF and S20DC on the cathodes properties. The Sm in the ceria particles of the composite cathode was substituted with other rare-earth elements. Cathodes with Pr and Gd co-doped ceria in the active layer provided the better performance than those with Sm- or Gd-doped ceria.

• 한국응용곤충학회지
• /
• 제16권4호
• /
• pp.235-239
• /
• 1977

선발에 의하여 얻은 벼 흰빛잎마름병균 Xanthomonas oryzae의 Streptomycin 내성균에 대하여 병원성, 배지내에서의 생장량 및 자외선 감수성에 대한 변이성을 조사하여 다음과 같은 결과를 얻었다. (1) SM 내성균은 Wase-Aikoku-3, Rant Emas-2 황옥 및 Kimmase의 4개 판별품종에 대한 병원성 비교에서 75-6의 내성균주가 황옥에 대하여 감수성 반응이 모균과 달리 중정도의 저항성을 나타내었다. 2) SM-내성균은 정상배지에서 모균보다 약간 높은 생장량을 보였고 100ug/ml Agrepto 첨가 배지에서는 접종후 60시간까지 생장이 조지되었으나 70시간 이후에는 모균의 생장량을 능가하였다. (3) SM-내성균은 254mu 파장의 자외선 조사에서 모균과 동일한 감수성을 나타내어 내성인자는 안정된 것으로 생각되었다.