• 플랜트 저널
• /
• 제16권1호
• /
• pp.38-43
• /
• 2020

본 연구에서는 무연탄용 서천화력발전소 1호기가 대기환경보전법 및 서천화력발전본부 내부 규정인 이산화황 평균 배출 규제치를 준수하며 연속운전 할 수 있는 흡수탑 내부의 석회석 슬러리 pH의 적정 운전범위를 찾고자 실험 하였다. 연소가스의 유량등 주요 운전요소를 고정한 상태에서 탈황 흡수탑으로 유입되는 연소가스 내의 이산화황 농도, C_in[ppm]을 370, 400, 460 그리고 550 ppm으로 변동시키며 운전하였을 때, 탈황 흡수탑 내부 적정 슬러리 pH는 4.4, 4.5, 4.8 그리고 5.1이었다. 따라서, 이산화 황과 적정 슬러리 pH를 이용하여 도출된 상관관계식 R_pH=0.004×C_in+2.93을 이용하여 운전하는 것을 추천한다.

• 플랜트 저널
• /
• 제15권1호
• /
• pp.38-44
• /
• 2019

본 연구에서는 1,000 MW급 석탄화력발전소용 탈황흡수탑을 대상으로 대기환경보전법 및 발전소 자체 배출규제치를 준수하면서 운전할 때, 석회석 슬러리 투입량을 조절하여 흡수탑 내부 슬러리 pH의 적정 범위를 찾고자 하였다. 배기가스 유량, 발전기 출력, 흡수탑 압력강하, 산화용 공기량을 고정한 상태에서 흡수탑 유입가스에 포함된 이산화황의 평균 농도, ${\bar{C\;in}}$ [ppm]을 500 ppm, 550 ppm, 600 ppm 그리고 635 ppm으로 변동시키며 운전하였을 때, 흡수탑 내부 적정슬러리 pH, 는 5.0, 5.2, 5.3 그리고 5.4였다. 이러한 결과로부터 흡수탑 유입가스에 포함된 이산화황의 평균 농도가 500~635 ppm의 범위일 때 상관관계식 을 이용하여 적정슬러리 pH를 산출하여 운전하는 것이 추천된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.107.2-107.2
• /
• 2012

We used the electrophoretic deposition (EPD) process to fabricate a glass composite and investigated the EPD parameters to find the optimum deposition time by understanding the relationship among the process parameters of zeta potential (ZP), pH, deposition yield and saturation point. A binder and a dispersing agent were mixed properly with glass frit ($0.2{\sim}25{\mu}m$, d50=$8.77{\mu}m$) in an ethyl alcohol medium for the preparation of the slurry. The pH and ZP were in an inverse relationship to each other due to the generation of $H_3O^+$ ions with the addition of the dispersing agent in the slurry. The acidic nature of the dispersing agent was resulted in a decrease of the pH and an increase of the ZP. Otherwise, the pH increased with the addition of the glass frit in the slurry because $H_3O^+$ ions were absorbed on the glass frit. Therefore, the $OH^-$ ions correspondingly increased. The saturation point of EPD was strongly correlated with the variation of the pH in the slurry; this is caused by a chemical reaction between the ethyl alcohol and the ions that make up the glass frit. An adjustment of the pH variation and the saturation point in the slurry can be established with respect to the optimum deposition time in the slurry.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.979-986
• /
• 2001

This paper was researched the effect of slurry stability on the mechanical and electrical property of the porcelain insulator with various raw materials such as feldspar, quartz, clay and l7wt% alumina. The slurry was fabricated after ball milling the mixed raw materials. Green compacts were made by the extrusion and were sintered at 1300$\^{C}$ for 60min in the tunnel kiln. All of the specimens were densified 96% of the theoretical density. The 3-point flexural strength($\sigma$$\_$B/) of the specimen stabilized slurry pH 7.8 was 1650 k9/㎠ and the vickers hardness(Hv) and the fracture toughness(K$\_$IC/) were 27.5 GPa and 2.2 MPa$.$m$\^$$\sfrac{1}{2}$/, respectively. The mechanical properties of the specimen stabilized slurry PH 9.3 were 1716 kg/㎠($\sigma$$\_$B/), 27.6 GPa(Hv) and 3.0 MPa$.$m$\^$$\sfrac{1}{2}$/(K$\_$IC/), respectively. The dielectric strength was increased from 8.3kV/mm to 13.2kV/mm as the increase of the slurry pH from 7.8 to 9.3. Therefore the physical properties of the specimen stabilized slurry pH 9.3 were improved.

• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.705-710
• /
• 1999

Stability and chemical durability for aqueous casting of BaTiO3 slurry with polycarylic acid(PAA) were studied. PAA was well chemisorbed on surface of BaTiO3 powder at neutral pH but did not chemically adsorbed at low pH. The amount of Ba dissolution in aqueous BaTiO3 slurry was abruptly increased at strong acid pH2 and also at high amount of PAA. Protection of Ba dissolution and stability of slurry could be obtained through the optimization of slurry conditions such as pH amount of surfactant and solid content.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1385-1390
• /
• 2010

Repeated additions of untreated slurry to soil affected ecology and caused high levels of heavy metal in soil and ground water. The objective of this study was to evaluate heavy metal from hanwoo slurry with ferrous sulfate ($FeSO_4{\cdot}7H_2O$), aluminum sulfate [$Al_2(SO_4)_3{\cdot}14H_2O$, alum] and aluminum chloride ($AlCl_3{\cdot}6H_2O$) as a way to improve environmental management in hanwoo industry. The treatment rates, which were incorporated totally within the hanwoo slurry, were 1.0 g and 1.5 g of ferrous sulfate, alum and aluminum chloride/25 g of hanwoo slurry. The various rates of chemical additives significantly increased dry matter (9.98~13.94%) and decreased pH (3.48~6.52) compared with the controls. The use of chemical additives decreased Fe (11~29%), Al (7~12%), Zn (13~36%), and Cu (4~32%) contents, except for Fe in hanwoo slurry with ferrous sulfate and Al in hanwoo slurry with alum and aluminum chloride. In addition, the reduction in heavy metal should be associated with reduction in pH. In conclusion, the results of this study suggest that alum and aluminum chloride additives at rate of 1.5 g were cost-effective management practice that significantly reduces heavy metal from hanwoo slurry, while it may be improved environmental management.

• 한국환경과학회지
• /
• 제18권7호
• /
• pp.811-817
• /
• 2009

To determine changes in nitrogen contents and optimal rates as N fertilizer, we investigated nitrogen characteristics in the slurry in the respond to the application of 0, 0.5, and 1 g of ferrous sulfate or alum /25g of dairy slurry. Additions of ferrous sulfate or alum increase total nitrogen, inorganic nitrogen, available nitrogen, and predicted available nitrogen contents in dairy slurry, resulting in reduction in pH. The best results were found in the treatment with 0.5 g of ferrous sulfate or alum /25 g of dairy slurry. In conclusion, the use of ferrous sulfate or alum as on-farm amendment to dairy slurry should be represented an alternative to improve N in dairy slurry.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.120-124
• /
• 2004

본 연구는 Diluted Ceria 입자를 사용한 $SiO_2$(Oxide) CMP 현상에 대한 내용이다. Ceria Slurry의 경우 Silica Slurry와 비교하였을 때 Oxide Wafer 표면과 축합 화학반응을 일으키며 Chemistry Dominant한 CMP Mechanism을 따르고, Wafer Center Removal Rate(RR) Fast 의 특성을 가진다. Ceria Slurry의 문제점인 연마 불균일도를 해결하기 위해 Tribological System을 이용하였다. CMP Tribology는 Pad-Slurry 유막-Wafer의 System을 가지며 윤활막에 작용하는 마찰계수(COF)가 주요 인자이다. Tribology에 적용되는 Stribeck Curve를 통해 Slurry 윤활막의 두께(h) 정도를 예상할 수 있으며, 이 윤활막의 두께를 조절함으로써 Uniformity 향상이 가능하다. 이 Ceria Slurry CMP의 연마 불균일도를 향상시킬 수 있는 방법으로 pH 조절 및 점도 증가가 있다. Ceria 입자 CMP는 분산액의 pH 변화에 강한 작용을 받게 되며 PH5 근방에서 최적화된 Uniformity가 가능하다. 점도를 증가시키는 경우 유막 h가 증가하게 되어 Ceria Slurry의 유동이 균일 분포 상태에 가까워지며 Wafer Uniformity 향상이 가능하다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권3호
• /
• pp.457-466
• /
• 2018

Objective: The present study aimed to assess the nitrogen (N) use efficiency of acidified pig slurry for regrowth yield and its environmental impacts on perennial ryegrass swards. Methods: The pH of digested pig slurry was adjusted to 5.0 or 7.0 by the addition of sulfuric acid and untreated as a control. The pig slurry urea of each treatment was labeled with $^{15}N$ urea and applied at a rate of 200 kg N/ha immediately after cutting. Soil and herbage samples were collected at 7, 14, and 56 d of regrowth. The flux of pig slurry-N to regrowth yield and soil N mineralization were analyzed, and N losses via $NH_3$, $N_2O$ emission and $NO_3{^-}$ leaching were also estimated. Results: The pH level of the applied slurry did not have a significant effect on herbage yield or N content of herbage at the end of regrowth, whereas the amount of N derived from pig slurry urea (NdfSU) was higher in both herbage and soils in pH-controlled plots. The $NH_4{^+}-N$ content and the amount of N derived from slurry urea into soil $NH_4{^+}$ fraction ($NdfSU-NH_4{^+}$) was significantly higher in in the pH 5 plot, whereas $NO_3{^-}$ and $NdfSU-NO_3{^-}$ were lower than in control plots over the entire regrowth period. Nitrification of $NH_4{^+}-N$ was delayed in soil amended with acidified slurry. Compared to non-pH-controlled pig slurry (i.e. control plots), application of acidified slurry reduced $NH_3$ emissions by 78.1%, $N_2O$ emissions by 78.9% and $NO_3{^-}$ leaching by 17.81% over the course of the experiment. Conclusion: Our results suggest that pig slurry acidification may represent an effective means of minimizing hazardous environmental impacts without depressing regrowth yield.

• 한국초지조사료학회지
• /
• 제18권3호
• /
• pp.243-250
• /
• 1998

This study was conducted to evaluate mineral content of Winter Rye, Nitrogen Balance, Soil chemical characteristics and NO,-N level in infiltration water as affected by different slurry application on the basis of N contents respectively and was arranged as a randomized complete block design with seven treatments (chemical fertilizer 160kg Nha, cattle slurry 160 . 320 - 480kg Nha, swine slurry 160 - 320 - 480kg Nha) and conducted at National Livestock Research Institute, RDA, in Suweon fiom Sep. 1996. to Apr. 1997. The results obtained are summarized as follows : Nirogen, Phosphorous, Calcium and Potassium of Winter Rye slightly increased as slurry application level was increased (p$NO_3$-N content ($\mu$g/g) of Winter Rye was shown fiom 780 to 1,462 in all treatments, especially , the swine slurry plots were significantly higher than that of cattle sluny plots (p < 0.05). As slurry application increased, show a marked trend toward surplus N input in all treatment. The pH of the topsoil (0~IOcm) was shown 6om 5.1 to 5.4 except the plot of chemical fertilizer before experiment pH of 5.1, but the pH of the subsoil (10~20cm) tended not to be regular. The content of available ,TEX>$P_2O_5$ inaeased with the increased application of slurry, particularly, the topsoil (O- 1Ocm) were much higher than the subsoil (10~20cm). The $NO_3$-N content of infiltration water (depth:lm) was increased as affected by sluny application.