• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.267-276
• /
• 2019

The purpose of this study was to examine the influence of conditions for quenching and/or tempering on the corrosion and hydrogen diffusion behavior of ultra-strong automotive steel in terms of the localized plastic strain related to the dislocation density, and the precipitation of iron carbide. In this study, a range of analytical and experimental methods were deployed, such as field emission-scanning electron microscopy, electron back scatter diffraction, electrochemical permeation technique, slow-strain rate test (SSRT), and electrochemical polarization test. The results showed that the hydrogen diffusion parameters involving the diffusion kinetics and hydrogen solubility, obtained from the permeation experiment, could not be directly indicative of the resistance to hydrogen embrittlement (HE) occurring under the condition with low hydrogen concentration. The SSRT results showed that the partitioning process, leading to decrease in localized plastic strain and dislocation density in the sample, results in a high resistance to HE-induced by aqueous corrosion. Conversely, coarse iron carbide, precipitated during heat treatment, weakened the long-term corrosion resistance. This can also be a controlling factor for the development of ultra-strong steel with superior corrosion and HE resistance.

• 한국표면공학회지
• /
• 제27권4호
• /
• pp.215-222
• /
• 1994

The role dispersoids has been studied in a number of researches as a key point for the high strength application of dispersion strengthened aluminum alloy. The mechanical alloying(MA) process with high mechanical properties of dispersion strengthened MA Al-8Ti-1B alloys were invested in order to evaluate their stress corrosion cracking(SCC) application. SCC properties of the mechanically alloyed Al-8Ti-1B were studied using slow strain rate test(SSRT). In this study Al-8Ti-1B alloy were more susceptible to SCC in solutions of pH=2.01 and 13.2 than pH=6.81 solution. In this study Al-8Ti-1B alloys by MA had more SCC resistance than Al-8Ti alloys or Al 7075-T73 alloys. So Al-8Ti-1B alloys by MA had more resistance in SSRT SCC susceptinility test than any other above alloying metals.

• 한국가축번식학회지
• /
• 제8권1호
• /
• pp.22-28
• /
• 1984

This experiment was carried out to investigate effects of DMSO or ethylene glycol as a cryopotectant and of freezing methods on survival rate of forozen-thawed rat 2-cell embryos by morphological observation. 2-cell embryos were recovered from oviducts of Sprague Dawley females mated with males of same strain on day 2 of pregnancy after inducing superovulation by intrapertioneal injection of PMSG and HCG. In slow freezing and thawing groups, embryos were frozen to -79$^{\circ}C$ or -196$^{\circ}C$ in a glass test tube containing 0.2ml PBI with 1.5M DMSO or 1.2M ethylene glycol at a rate of 0.3-1.0C/min. and thawed slowly. When samples were frozen to -79$^{\circ}C$, higher survival rate was obtained in the medium containing DMSO (43.9%) than ethylene glycol (41%). And similar result was obtained (32.5% in DMSO vs. 31.4% in ethylene glycol) when samples were frozen. In rapid freezing and thawing groups, embryos were frozen to -79 or -196$^{\circ}C$ in a glass test tube containing 0.2ml of PBI with 1.5M DMSO or 1.2M ethylene glycol by rapid cooling, and thawed rapidly. When samples were frozen to -79$^{\circ}C$, 1.5M DMSO (13.2%) was more effective than 1.2M ethylene glycol (6.1%). When the storage temperature was -196$^{\circ}C$, survival rates were 9.8% in 1.5M and 5.4% in 1.2M ethylene glycol.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.460-469
• /
• 2000

A study on the corrosion behavior of RE36 steel for marine structure was investigated with parameters such as micro-Vickers hardness, corrosion potential and corrosion current density measurement of weld metal(WM), base metal (BM) and heat affected zone(HAZ), Al anode generating current and Al anode weight loss quantity in case of cathodic protection. And we carried out slow strain rate test(SSRT) in order to research mechanical properties such as stress at maximum load, percent strain, time to fracture and strain to failure ratio etc and to find out limiting cathodic polarization potential for hydrogen embrittlement with applied cathodic polarization potential. Hardness of HAZ part was the highest among those three parts and also galvanic corrosion susceptibility was the highest in HAZ part among those three parts due to the lowest corrosion potential than other parts. However corrosion current density was the highest in WM part among those three parts. And the optimum cathodic polarization potential showing the best mechanical properties obtained by SSRT method with applied constant cathodic potential was from - 770mV to - 875mV(SCE). However it is suggested that limiting cathodic polarization potential indicating hydrogen embrittlement on the mechanical properties was under - 900mV(SCE).

• Nuclear Engineering and Technology
• /
• 제17권3호
• /
• pp.211-215
• /
• 1985

온도 및 연신율 변촤가 Zircaloy-4의 요드 응력부식 거동에 미치는 영향을 30$0^{\circ}C$에서 일정 하중법과 300, 350, 40$0^{\circ}C$에서 일정 연신율법으로 ($10^{-5}$sec~$10^{-6}$ sec) 3.34mg $I_2$/㎤의 요드분위기에서 연구하였다. 요드 응력부식균열에 대한 저항성은 온도가 상승하거나 변형속도가 감소하면 감소했고 파손 시간과 응력과의 관계는1/tｆ∝exp (0.3$\sigma$/$\sigma$uTs-31.5)로 표시할 수 있었다. 30$0^{\circ}C$에서 요드 응력 부식 균열에 대한 저항성을 불활성 분위기에서의 파손에너지에 대한 요드분위기에서의 파손 에너지의 비율로 표시할 때 변형속도가 7.6$\times$$10^{-6}$ sec 부근에서 저항성이 가장 낮았고 온도가 35$0^{\circ}C$, 40$0^{\circ}C$ 로 증가함에 따라 보다 높은 변형속도에서 최저 저항성을 나타내는 경향을 보였다. 요드 응력부식 균열의 파단면에서 준-벽계 파면(quasi-cleavage fracture)을 관찰했다. 전술한 결과에 의하면 Zircaloy-4의 요드 응력부식균열의 기구에 있어서 보호 피막파손단계 (film rupture step)가 중요한 과정으로 추정된다.

• Corrosion Science and Technology
• /
• 제15권5호
• /
• pp.237-244
• /
• 2016

2205 duplex stainless steels have been used for the construction of the marine environment, because of their excellent corrosion resistance and high strength. However, the resistance to hydrogen embrittlement (HE) may be less than that of 316L austenitic stainless steel. The reason why 316L stainless steels have better resistance to HE is associated with crystal structure (FCC, face centered cubic) and the higher stacking faults energy than 2205 duplex stainless steels. Furthermore 2205 stainless steels with or without tungsten were also examined in terms of HE. 2205 stainless steels containing tungsten is less resistible to HE. It is because dislocation tangle was formed in 2205 duplex stainless steels. Slow strain-rate tensile test (SSRT) was conducted to measure the resistance to HE under the cathodic applied potential. Hydrogen embrittlement index (HEI) was used to evaluate HE resistance through the quantitative calculation.

• 한국주조공학회지
• /
• 제40권5호
• /
• pp.129-133
• /
• 2020

The outcomes of solution annealing and stress corrosion cracking in cold-worked 316L austenitic stainless steel have been studied using x-ray diffraction (XRD) and the slow strain rate test (SSRT) technique. The good compatibility with a high-temperature water environment allows 316L austenitic stainless steel to be widely adopted as an internal structural material in light water reactors. However, stress corrosion cracking (SCC) has recently been highlighted in the stainless steels used in commercial pressurized water reactor (PWR) plants. In this paper, SCC and inter granular cracking (IGC) are discussed on the basis of solution annealing in a chloride environment. It was found that the martensitic contents of cold-worked 316L stainless steel decreased as the solution annealing time was increased at a high temperature. Moreover, mode of SCC was closely related to use of a chloride environment. The results here provide evidence of the vital role of a chloride environment during the SCC of cold-worked 316L.

• 한국식품위생안전성학회지
• /
• 제12권1호
• /
• pp.9-14
• /
• 1997

Vibrio mimicus is a closely related species with V. cholerae, and has been reported to be associated with gastrointestinal infections. Although extraintestinal infections of these vibrios have also been reported in Japan and Southeast Asia. But little research papers on V. mimicus was reported in Korea. Therefore, we tried to isolate V. mimicus from the environmental sea water from April to July in Pusan, Korea. Among the isolated strains, we selected the strongest hemolytic strain and then named V. mimicus SM-9. In this paper, we checked the antibiotic susceptibility and psychrotrophic characteristics of the isolated strain. Hemolytic activity of the hemolysin produced by the isolated strain was also measured. V. mimicus was not detected from the sea water samples in April and May, but its detection rate was relatively high in June and July in Pusan, Korea. The bacteriological characteristics of V. mimicus SM-9 were Gram-negative rods, motile, oxidase positive, Voges-Proskauer negative and sucrose negative. In 23 kinds of antibiotics susceptibility test, V. mimicus SM-9 showed susceptibility to the most of antibiotics submitted while it was resistive against lincomycin, oxacillin, rifampin and vancomycin. Hemolytic activity of the hemolysin produced by V. mimicus SM-9 was highest in stationary phase of the growth curve in BHI broth at 37$^{\circ}C$ and its activity was reached 18 HU per $m\ell$ of culture supernatant. For checking the psychrotrophic property of V. mimicus SM-9, the decreasing rate of the strain in phosphate buffer solution and yellowtail flesh homogenate was examined during the storage at 4, 0, -4 and -2$0^{\circ}C$. The decreasing rates of the selected strain stored in phosphate buffer solution were greater than those in fish homogenate. Decreasing rates of V. mimicus SM-9 stored in phosphate buffer solution were not significantly different by the storage temperatures. The viable cell counts of the strain were decreased as 5 log cycles after 120 hours at all the tested temperatures. While decreasing numbers of the strain in fish homogenates were 2*4 log cycles after 120 hours. The decreasing pattern of the strain numbers were very slow after 200 hours at all the stored temperatures.

• Corrosion Science and Technology
• /
• 제22권5호
• /
• pp.341-350
• /
• 2023

In the present study, effects of a thin Zn-flash coating on hydrogen evolution, infusion, and embrittlement of advanced high strength steel during electro-galvanizing were examined. The electrochemical permeation technique in conjunction with impedance spectroscopy was employed under applied cathodic polarization. Moreover, a slow-strain rate test was conducted to evaluate loss of elongation (i.e., indicative of hydrogen embrittlement (HE)) and examine fracture surfaces. Results showed that the presence of a thin Zn-flash coating, even when it was not distributed uniformly, reduced hydrogen evolution rate and substantially impeded infusion of hydrogen into the steel substrate. This was primarily due to a hydrogen overvoltage on Zn coating and trapping of hydrogen at the interface of Zn coating/flash coating/steel substrate. Consequently, the sample with flash coating had a smaller HE index than the sample without flash coating. These results suggest that a thin Zn-flash coating could be an effective technical strategy for mitigating HE in advanced high-strength steels.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.454-460
• /
• 2015

Acoustic emission (AE) is one of the promising methods for detecting the formation of stress corrosion cracks (SCCs) in laboratory tests. This method has the advantage of online inspection. Some studies have been conducted to investigate the characteristics of AE parameters during SCC propagation. However, it is difficult to classify the distinct features of SCC behavior. Because the previous studies were performed on slow strain rate test or compact tension specimens, it is difficult to make certain correlations between AE signals and actual SCC behavior in real tube-type specimens. In this study, the specimen was a AISI 304 stainless steel tube widely applied in the nuclear industry, and an accelerated test was conducted at high temperature and pressure with a corrosive environmental condition. The study result indicated that intense AE signals were mainly detected in the elastic deformation region, and a good correlation was observed between AE activity and crack growth. By contrast, the behavior of accumulated counts was divided into four regions. According to the waveform analysis, a specific waveform pattern was observed during SCC development. It is suggested that AE can be used to detect and monitor SCC initiation and propagation in actual tubes.