1 |
A. Zingales, G. Quartarone and G. Moretti, Corrosion, "Sigma phase intergranular corrosion effects in austenitic welds containing ferrite", 41 (1985) 136.
DOI
|
2 |
P. Muraleedharan, J. B. Gnanamoorthy and P. Rodriguez, Corrosion, "Comparative study: degree of sensitization and intergranular stress corrosion cracking susceptibility of type 304 stainless steel", 52 (1996) 790.
DOI
|
3 |
I. Chattoraj, A. Bhattamishra, S. Jana, S. Das, S. Chakraborty and P. De, Corr Sci,. "The association of potentiokinetic reactivation and electrochemical pitting tests on a nitrogen bearing 19 Cr-17 Mn steel with its thermal history", 38 (1996) 957.
DOI
|
4 |
P. Shankar, H. Shaikh, S. Sivakumar, S. Venugopal, D. Sundararaman and H. Khatak, J Nucl Mater, "Effect of thermal aging on the room temperature tensile properties of AISI type 316LN stainless steel", 264 (1999) 29.
DOI
|
5 |
H. Sahlaoui, K. Makhlouf, H. Sidhom and J. Philibert, Mater Sci Eng A, "Effects of ageing conditions on the precipitates evolution, chromium depletion and intergranular corrosion susceptibility of AISI 316L: experimental and modeling results", 372 (2004) 98
|
6 |
M. Sanga, N. Yukawa and T. Ishikawa, Proc. International Symposium on Designing, Toyohashi, Japan (1997).
|
7 |
K. Chandra, V. Kain and P. Ganesh, J of Mater. Eng. and Performance, "Controlling End-Grain Corrosion of Austenitic Stainless Steels", 17 (2008) 115.
DOI
|
8 |
Kim KJ, Lim SG and Pak SJ, Corrosion Science and Technology, "Effects of the solid solution heat treatment on the corrosion resistance property of SSC13 cast alloy", 14 (2015) 93.
DOI
|
9 |
K. Kim, S. Lim, H. Ju and S. Pak J. Korea Foundry Society, "Effect of austenitizing ratio on the delta ferrite volume fraction and corrosion resistance of shell mold cast SSC13 elbow fitting", 35 (2015) 109.
DOI
|
10 |
A. Padilha, R. Plaut and P. Rios, Steel Heat Treatment Handbook, 2nd ed., CRC Press, FL (2007) 695.
|
11 |
P. Gabrielson, E. Schedin and G. Ekstrand, Advanced Technology of Plasticity II, Springer, Berlin (1999) 1383.
|
12 |
N. N., Contract 248/1999, Research on corrosion behaviour of heat exchanger plates from Apaterm SA, (GALATI, 1999).
|
13 |
N. Solomon and I. Solomon, U.P.B. Sci. Bull., Series B, 72 (2010) 197.
|
14 |
Kim KJ, Ju HK, Moon YD, Hong JH and Pak SJ, Metall Trans., "Effect of the Solution Annealing and Chemical Passivation Followed by Aging on the Corrosion of Shell Mold Cast CF8 Stainless Steel", 47 (2016) 4979. Affiliated with Department of Mechanical Engineering, University of New Hampshire
DOI
|
15 |
M. Terada, M. Saiki, I. Costa and A. Padilha, J Nucl Mater, "Microstructure and intergranular corrosion of the austenitic stainless steel 1.4970", 358 (2006) 40.
DOI
|
16 |
N. Solomon and I. Solomon, Engineering Failure Analysis, "Effect of deformation-induced phase transformation on AISI 316 stainless steel corrosion resistance", 79 (2017) 865.
DOI
|
17 |
Kim YS, Lee DJ, Kang YJ and Pak SJ, Aspects in Mining & Mineral Science, "Effect of solution annealing on alpha prime martensitic microstructure of cold rolled AISI316L stainless steel" 4 (2019) 481.
|
18 |
Z. Stonawska, M. Svoboda, M. Sozanska, M. Kristkova, J. Sojka, C. Dagbert and L. Hyspecka, J Microsc, "Structural analysis and intergranular corrosion tests of AISI 316L steel", 224 (2006) 62.
DOI
|
19 |
P. M. Scott, W. Foot, L. A. Goldsmith, S. Dumbill, T. M. Williams and J. M. Perks, C. A. English and W. G. Burns, NEA/UNIPEDE specialists Mtg. on life-limiting & regulatory aspects of core internals and pressure vessels, Stockholm (1987).
|