• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.798-805
• /
• 2017

This paper presents a low profile multi circular ring with different radius, patch antenna with modified feed line and slotted ground. The size of the antenna is $15{\times}12mm^2$, having electrical dimensions of $0.14{\lambda}{\times}0.12{\lambda}$ (at lower initial frequency) and footprints of $180mm^2$. The proposed antenna covers 3.1 to 12.3 GHz, reflection coefficient up to -38 dB with Bandwidth ratio of 4.13:1 and fractional Bandwidth of 122%. Bandwidth dimension ratio has been calculated (which is 6246) as a proof for compact size. Thin slots introduced on the feed line provide good impedance matching for whole frequency band. Numerical simulations of the proposed antenna are reported in terms of reflection coefficient ${\leq}-10dB$, vswr 2:1, radiation pattern and group delay (ns). The proposed antenna has advantage of very small size along with better impedance match that provides a practical approach to realize it for BW enhancement and UWB applications.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.415-423
• /
• 2019

In this paper, a design method for a high-sensitivity microstrip patch sensor antenna (MPSA) loaded with a bent-slot was studied for the permittivity measurement. The bent-slot similar to a single-ring complementary split ring resonator was added along a radiating edge of the patch in order to enhance the sensitivity to the permittivity. The sensitivity of the proposed MPSA was compared with that of a conventional rectangular MPSA and a thin rectangular-slotted MPSA. Three MPSAs were designed and fabricated on a 0.76-mm-thick RF-35 substrate so that the input reflection coefficient would resonate at 2.5 GHz in the absence of the superstrate under test. When five different Taconic substrates with a relative permittivity ranging from 2.17 to 10.2 were used as the superstrate under test, experiment results show that the sensitivity of the proposed MPSA, which is measured by the shift in the resonant frequency of the input reflection coefficient, is 4.1 to 6.1 times higher than that of the conventional MPSA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.893-899
• /
• 2000

WDM technology has been an emerging issue for the efficient use of optical links. WDM uses a number of different wavelengths that are assigned to each channel. The minimal number of optical transcievers and receivers should be used in a node to build an economic WDM transmission system without degrading system performance. Hence, the analysis of performance parameters such as throughput and delay is important to guarantee the WDM system performance. In this paper, the performance of a MAC protocol on a slotted WDM system that has a tunable transmitter(TTX), a tunable receiver(TRX), and a fixed receiver(FRX), respectively, on each node, was statistically analyzed. The computer simulation validates the performance analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.148-154
• /
• 2005

As the exciting point of each phase is determined by the position of rotor, the rotor's accurate position-information is needed for the Switched Reluctance Motor(SRM). When using an absolute-encoder or a resolver, to detect the location of rotor the initial starting is possible, as early sensing of rotor's location is possible. However, this is not appropriate, considering the economical efficiency, and in case of using the incremental-encoder, there's a problem at initial starting as it is not easy to track down the location of rotor at the very beginning. When using Hall-ICs, there's a fault, as it needs a special ring magnet. Considering the initial starting and economical efficiency, the optical sensor technique using a slotted-disk and an opto-interrupter is appropriate, however, this method needs three opto-interrupters and a slotted-disk when using the 6/4 pole SRM. Nevertheless, in this paper, it used only two optical sensors to operate 6/4 pole SRM and made the start up and also forward and reverse operation possible. By excluding the slotted-disc md shortening a optical sensor, it improved the convenience and economical efficiency of the production. Also, as the space for slotted-disc is no more needed, it was able to reduce the size of motor.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.2
• /
• pp.55-60
• /
• 2008

Packet-switched wavelength division multiplexing (WDM) ring networks have been extensively studied as solutions to the increasing amount of traffic in metropolitan area networks, which is widely expected to be a mix of unicast and multicast traffic. In this paper we study the fairness between unicasting and multicasting in slotted packet-switched WDM ring networks that employ a tunable transmitter and fixed tuned receiver at each node and a posteriori buffer selection. We find that single-step longest queue selection algorithm generally results in unfairness between unicasting and multicasting or a lilted relative priority for multicast vs. unicast traffic. We present the various virtual output queue structures and their performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.379-388
• /
• 1998

In this paper we propose a DMR-II shared-medium access control protocol which was developed for the ATM access network users to support isochronous and non-isochronous traffics simultaneously under the bandwidth sharing environment, and describe its architecture and operation principles. The DMR-II protocol uses the slotted-ring topology, and gives the higher transmission priority to the isochronous traffic than the non-isochronous traffic. To support the isochronous traffic it uses the slot reservation mechanism, and maintains the delay variation of the isochronous traffic beyond the threshold value by using the blocking mechanism whenever the total user traffic overflows the network's bandwidth limitation. for the non-isochronous traffic the DMR-II protocol lets all the nodes to have fair transmission chances by using the reset mechanism based on the window counter scheme.

• Korean Journal of Optics and Photonics
• /
• v.5 no.4
• /
• pp.493-498
• /
• 1994

A fiber-optic matched filter with Cr/ Au film-deposited fiber-optic delay lines is fabricated for a possible application as photonic packet address detectors for an all-optical slotted ring network. Correlation waveforms for a set of 6-bit address codes with 2.5 Gb/s are produced by simulation. It is shown that the measured correlation outputs agree well with the calculated ones.d ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5B
• /
• pp.529-536
• /
• 2001

광섬유 지연선로 정합 여파기를 광 패킷 어드레스 처리기로 사용한 완전 광 패킷 교환 노드들로 구성된 슬러티드 링 통신망에서 가우시언, 2차 초가우시언, 그리고 RZ 구형파 형태의 입력 광 펄스에 대한 노드의 패킷 오율 변화에 관하여 고찰하였다. 전송속도의 증가에 따라 모든 입력 펄스 형태에 대해 패킷오율이 증가하였고, 산탄 잡음의 영향이 크게 나타났다. 패킷 오율 $10^{-9}$에서 전송속도가 같은 경우에는 가우시언 펄스, 2차 초가우시언 펄스, RZ 구형파 순으로 첨두 파워가 증가한 반면, 펄스 에너지는 모든 펄스 형태에서 거의 같게 나타났다. 넓은 펄스폭을 갖는 가우시언 펄스는 대역폭 감소로 인해 잡음 전력이 감소하는 효과보다, ISI로 인한 각 어드레스 코드의 상관 출력레벨 변동으로 발생하는 파워 패널티 효과가 더 크게 나타났다. 따라서, ISI에 의한 영향을 최소화하기 위해서는 가우시언 펄스의 rms 폭을 1/(4B)이하로 유지해야 함을 알 수 있었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.47-53
• /
• 1999

The effect of coating of liner components with oxidized starch on the properties of corrugated box was examined . Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) , and corrugated box was made from the treated corrugated board. Box was made in a regular slotted container (RSC) style, and box compression strength was determined in the direction of top-to-bottom compression. The compression strength of box coated on outside liner component showed 15.4% improvement for 1.58g㎡ coating. On the other hand, the strength of box coated on outside liner component showed only 1.45% improvement for 1.41g/㎡ coating and 3.46% improvement for 2.32g/㎡ coating. Coating on inside liner component with oxidized starch at low coating weight more significantly improved box compression strength than coating on outside liner component, and the improvement was marked at the coating weight of 1.5-2.5g/㎡. In estimating top-to-bottom box compression strength, the experimental values were closer to the calculated values from McKee's equation suing edgewise compression strength of the combined board measured by column crush test than those from Kellicutt's equation using compression strength of component paperboards measured by ring crush test.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.41-47
• /
• 2001

The paper describes SR3 (Synchronous Round Robin with Reservations), a collision-free medium access control protocol for all-optical slotted packet networks based on WDM multi-channel ring topologies where nodes are equipped with one fixed-wavelength receiver and one wavelength-tunable transmitter SR3 is derived from the SRR and MMR protocols previously proposed by the same authors for the same class of all-optical networks. SRR and MMR already achieve an efficient exploitation of the available bandwidth, while guaranteeing a throughput-fair access to each node. SR3, In addition, allows nodes to reserve slots. thereby achieving a stronger control on access delays; it is thus well suited to meet tight delay requirements, as it is the case for multimedia applications. Simulation results show that SR3 provides very good performance to guaranteed qualify traffic, but also brings signigicant performance improvements for best-effort traffic. Energy effciency is an important issue for optical network since they must rely on their batteries. We present a novel MAC protocol that achieves a good energy efficiency of optical interface of the network and provides support for diverse traffic types and QoS. The scheduler of the base station is responsible to provide the required QoS to connections on the optical link and to minimise the amount of energy spend by the High speed Network. The main principles of the MaC protocol are to avoid unsuccessful actions, minimise the number of transitions , and synchronise the mobile and the base-station. We will show that considerable amounts of energy can be saved using these principles.