• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.493-496
• /
• 2000

This paper presents a slotted leaky waveguide antenna using a rectangular waveguide for mobile reception of DBS (Direct Broadcasting Satellite). A slotted rectangular waveguide in leaky-wave operation can obtain a large beam-tilting angle of 45$^{\circ}$, which is an attractive candidate of mobile DBS receiving antennas because it can be installed horizontally. SNM is used to solve arbitrary shape and materials constant, derived from maxwell's equations. In this paper, analyze cross slot waveguide antenna using SNM. and verify by HFSS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.353-359
• /
• 2004

In this paper, the single-layer slotted waveguide array antenna is designed, which consists of two par the slot plate and the structure of waveguide. The key difficulty in mass production is the realization of perfect electrical contact between the two parts. Therefore the single-layer slotted waveguide array antenna is presented with a dumbbell patch and a choke. The choke can prevent from the leakage between the slot plate and waveguide, while the choke in the adjacent waveguide incurs space dissipation. To reduce the spacing of antennas about a dumbbell patch is utilized. the 16${\times}$16 array antenna gain of 27.2 ㏈ with 45 % aperture efficiency is obtained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.135-138
• /
• 2000

This paper presents design for radiation element of slotted waveguide by the method of moment. The piecewise sinusoidal function as the basis function is used for the Moment Method. From the analytically results based on the Galerkin's moment method, frequency characteristics and radiation power is investigated for the design parameter such as the slot length, offset and angle. This paper also discusses that the radiation power is controled by the slot offset and angle. The thickness of the waveguide wall is also discusses in the analysis.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.10
• /
• pp.799-805
• /
• 1991

In this paper, the analysis and design of a spirally slotted array antenna with high efficiency are presented. Electric fields in the slots are calculated by electromagnetic fields in the upper waveguide and radiation field equations are derived. Slots are arrayed spirally on the upper circular plate of twofold radial waveguide. In order to suppress grating lobes from the array, a slow wave structure is inserted in the upper waveguide. This antenna is characterized by a good circular polarization, high efficiency of 75 percent and grating lobes below -34dB.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.122-127
• /
• 2012

Post-wall waveguide structures have attracted a great deal of attention for micro- and millimeter-wave applications. One of the waveguide’s applications is a slotted waveguide array. In order to design the slotted array, the characteristics of a slot unit alone on the post-wall waveguide should be investigated. In this paper, a method for extracting the S-parameters of a unit slot is proposed. This simple method requires only two kinds of waveguides: waveguides without a slot unit and waveguides with a slot unit. Three kinds of slot units are fabricated, and the extracted results show a high level of agreement with predicted (simulated) results. With this method, the equivalent slot length can also be found.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.32-37
• /
• 1989

The design method of the center-fed resonant type slotted waveguide antenna using the Dolph-Tschebyscheff array is presented. Slot admittances are obtained by empirical and theoretical method since the effect of mutual coupling between slots is included. We design a slotted waveguide antenna which has 1.8ft. length and operates on 9.4GHz. The experimental results of the antenna show that its gain, maximum sidelobe level and half power beam-width are 25.5dB, -22dB and 3.6deg., respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.30-35
• /
• 1995

Periodically slotted dielectrically filled paralled-plate waveguide as a leaky wave antenna is analysed for E-polarization case. The homogeneous linear equation whose unknown is the surface current density over the conducting strip is formulated, from which the complex propagation constant is calculated and compared with the previous results. Good correspondence between them is observed. And a method for the radiation pattern is also considered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.59-65
• /
• 2000

This paper describes the characteristics of a one dimensional narrow-wall slotted waveguide array with a single-layer linear-to-circular polarization converter consisting of a dipole array. An external boundary value Problem of one slot and three dipoles, which approximates the mutual coupling between the dipole array and an edge slot extending over three faces of a rectangular waveguide, is formulated and analyzed by the method of moments; design of polarization conversion is conducted for this model as a unit element. If every unit element has perfect circular polarization, grating lobes appear in the array pattern due to the alternating slot angle: these are suppressed in this paper by changing the dipole angle and degrading the axial ratio of the unit element. The validity of the design is confirmed by the measurements. The dipole array has negligible effects upon slot impedance; the polarization conversion for existing narrow-wall slotted arrays is realized by add-on dipole array.

• Journal of the Optical Society of Korea
• /
• v.15 no.4
• /
• pp.398-402
• /
• 2011

In this paper, we have proposed a principle to design wideband, low dispersion and temperature stabilized slow light structure in slotted photonic crystal waveguide (SPCW). The infiltration of the silicon photonic crystal with polymer will enhance the slow light and increase the group index, whereas the different signs of thermo-optic coefficients of polymer and silicon make the proposed structure stable on temperature variation over $60^{\circ}C$ and improves the group index-bandwidth products of the designed structure. The SPCW structure is modified to maximize the slow light effect and minimize the dependence of the group index and hence the group velocity dispersion to temperature.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.535-540
• /
• 2013

We design a slotted waveguide antenna for X-band which a 1.4m length with slot depth variation. A 54 slot array is modeled and simulated by CST, and the side lobe level is suppressed effectively in a certain range of frequency. The experimental results of the antenna show that its gain, maximum sidelobe level and half power beam-width are 21.8dB, -31dB and 2.0deg, respectively.