• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4122-4143
• /
• 2018

Because of the increment in network scale and test expenditure, simulators gradually become main tools for research on key problems of wireless networking, such as radio resource management (RRM) techniques. However, existing simulators are generally event-driven, causing unacceptably large simulation time owing to the tremendous number of events handled during a simulation. In this article, a mass-processing framework for RRM simulations is proposed for the scenarios with a massive amount of terminals of Internet of Things accessing 5G communication systems, which divides the time axis into RRM periods and each period into a number of mini-slots. Transmissions within the coverage of each access point are arranged into mini-slots based on the simulated RRM schemes, and mini-slots are almost fully occupied in dense scenarios. Because the sizes of matrices during this process are only decided by the fixed number of mini-slots in a period, the time expended for performance calculation is not affected by the number of terminals or packets. Therefore, by avoiding the event-driven process, the proposal can simulate dense scenarios in a quite limited time. By comparing with a classical event-driven simulator, NS2, we show the significant merits of our proposal on low time and memory costs.

• 한국통신학회논문지
• /
• 제40권10호
• /
• pp.1889-1899
• /
• 2015

본 논문은 위성 랜덤 액세스 채널에서 데이터의 신속한 전송을 위한 다중 슬롯 예약 기법을 제안한다. R-CRDSA(Reservation scheme with Contention Resolution Diversity Slotted ALOHA)에서는 각 단말이 하나의 프레임에서 하나의 슬롯만을 예약하여 사용하기 때문에 트래픽 부하가 낮은 상황에서 많은 슬롯이 낭비되는 문제가 발생하고, 상대적으로 크기가 큰 데이터를 전송하려는 위성 단말은 사용되지 않는 슬롯이 있다고 하더라도 여러 개의 프레임을 사용하여 데이터를 전송하기 때문에 지연시간이 증가한다. 본 논문에서 제안하는 다중 슬롯 예약 기법에서 각 단말은 자신의 패킷과 함께 데이터의 크기를 함께 전송하며 각 단말에서 발생한 데이터의 크기와 슬롯 예약 상태를 고려하여 다수의 슬롯을 예약하여 데이터를 전송한다. 따라서 각 위성단말은 다수의 슬롯을 예약하여 데이터를 전송하기 때문에 기존 슬롯 예약 기반의 위성 랜덤액세스기법에 비해 적은 수의 프레임을 사용하여 자신의 데이터를 전송할 수 있다. 또한 본 논문은 모의실험을 통해 기존 슬롯 예약 기반의 위성 랜덤 액세스 기법 대비 제안 기법의 성능 향상을 확인하였다.

• 한국전자파학회논문지
• /
• 제22권12호
• /
• pp.1184-1187
• /
• 2011

본 논문에서는 이중 대역 저지 기능을 갖는 평판형 모노폴 UWB 안테나를 제안하였다. 제안된 안테나의 대역 저지 특성은 패치 상의 1차와 3차의 힐버트 곡선 슬롯들에 의하여 구현되었다. 각 힐버트 곡선 슬롯의 크기를 조절함으로써, 3.3에서 3.7 GHz 그리고 5.3에서 6 GHz에 걸친 저지 대역을 쉽게 구현할 수 있었다. 제작된 안테나의 VSWR과 방사 패턴을 측정하였으며, 이 결과로부터 설계된 안테나가 UWB 통신에서 사용될 수 있음을 알 수 있었다.

• 한국항공운항학회지
• /
• 제26권1호
• /
• pp.25-36
• /
• 2018

This paper presents a new airport slot allocation model that uses AIP model to balance the use of airport slots within existing capacity based on the limitation of capacity expansion of airport slots. This new model is called a 'balanced airport slot allocation model', which integrates the airport facility usage system, which is applied independently without linkage, with the airport slot allocation system, introducing the market logical characteristic of 'administered incentive pricing. In this paper, we propose a new proposal to dramatically change the airport slot allocation system in the current situation where the expansion of facilities is limited in the urgent problem of the airport slot shortage, and it is necessary to balance the airport slot allocation. Airline paying for the use of an airport slot can determine the slot of the desired time slot based on the costs incurred by differentiating in the new airport slot allocation model. This is a system that allows the airlines that are willing to pay a lot of money in the market to use preferred airport slots.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.768-773
• /
• 2010

In this paper, we study on an optimal design of a triple-band PIFA (Planar Inverted-F Antenna) of 433 MHz, 912 MHz and 2.45 GHz by using evolution strategy. Generally, the resonant frequency of the PIFA is determined by the width and length of a U-type slot used. However the resonant frequencies of the multiple U slots are varied by the mutual effect of the slots. Thus the optimal width and length of U-type slots are determined by using an optimal design program based on the evolution strategy. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is constructed for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The resonant frequencies of initial model are 439.5 MHz, 981.5 MHz and 2.563 GHz. However, the resonant frequencies of the triple-band PIFA yielded by the optimal design program are 430.5 MHz, 907 MHz and 2.4515 GHz. Measured resonant frequencies are 433.5 MHz, 905.5 MHz and 2.454GHz, which show a good agreement with the simulation results.

• 한국전자파학회지:전자파기술
• /
• 제4권2호
• /
• pp.24-33
• /
• 1993

본 논문에서는 터널, 지하철 등 지하 공간에서의 무선통신을 가능하게 하는 주기적인 슬롯을 갖는 누설동축케이블의 전자파 특성을 해석하였다. 주기적인 구조를 해석하기 위해 Floquet 정리를 사용하여 동축 케이블의 표면파 특성을 해석하였고, 전파상수 및 필드의 진폭을 구하기 위하여 다변수 Newton Raphson법을 사용하여 식을 전개하였다. 이 값으로 부터 총축 케이블의 필드 분포, 표면 전송 임피던스(surface transfer impedance), 전류분포, 전파상수 등을 구하였다.

• 한국전자파학회논문지
• /
• 제19권4호
• /
• pp.411-417
• /
• 2008

본 논문에서는 UHF 대역 RFID 휴대 리더용 안테나로 원편파를 갖는 마이크로스트립 패치 안테나의 소형화를 제시한다. 제안된 안테나는 패치에 4개의 I 슬롯을 가지고 있으며, I 슬롯이 없는 같은 구조의 패치 안테나와 비교하여 안테나 크기가 감소하였다. 두께가 6.4 mm인 FR4 기판으로 제작된 안테나는 크기가 $76{\times}76\;mm$로 소형이면서, 반사 손실 -10 dB 대역폭은 $938{\sim}975\;MHz$, 대역폭 내 이득은 $-0.88{\sim}-2\;dBi$, 그리고 축비는 $3.27{\sim}13.21\;dB$를 가진다.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.793-798
• /
• 2011

Numerous methods are available for reducing the end-effect force of linear machines. Majority of these methods focus on redesigning the poles or slots. However, these methods require additional manufacturing cost and decrease the power density. The current paper introduces another approach to reduce the end-effect force. The new approach is a method of tuning the input phase current magnitudes individually. According to the proposed method, reduction of the end-effect force could be achieved without redesigning the poles/slots or attaching auxiliary poles/slots. The proposed method is especially applicable when the target motor is very expensive or will be used for a special mission, such as hauling army vehicles equipped with three single-phase inverters. The validity of the suggested method was exemplified by the finite element method with three-phase permanent-magnet linear synchronous motor.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.135-142
• /
• 2016

Generally, closed slots are adopted to reduce the water friction loss in both the stator and the rotor of water filling submersible motor due to the special environment of operation. One of the obvious differences between the traditional induction motors and water filling submersible motors is that the submersible motors only need relatively smaller starting torque. This paper aims to analyze the slot leakage reactance of water filling submersible motor during starting transient operation. An improved analytical method which considered the magnetic saturation of the slot bridge and the skin effect of rotor bars is proposed. The slot permeance factor which has a direct impact on the slot leakage reactance is calculated. Then finite element models with different stator slot types are constructed and search coils are introduced to measure the slot flux linkage. Moreover, the starting performances of the models with two typical stator slots are compared and the flux leakage characteristics are obtained. Finally, the results obtained by finite element method are very close to the results obtained by analytical method.

• Structural Engineering and Mechanics
• /
• 제62권6호
• /
• pp.739-748
• /
• 2017

Notches such as slots are typical geometric features on mechanical components that promote fatigue crack initiation. Unlike for components with open hole type notches, there are no conventional treatments to enhance fatigue behavior of components with slots. In this work we evaluate the viability of applying laser shock peening (LSP) to extend the fatigue life of 6061-T6 aluminum components with slots. The feasibility of using LSP is evaluated not only on damage free notched specimens, but also on samples with previous fatigue damage. For the LSP treatment a convergent lens was used to deliver 0.85 J and 6 ns laser pulses 1.5 mm in diameter by a Q-switch Nd: YAG laser, operating at 10 Hz with 1064 nm of wavelength. Residual stress distribution was assessed by the hole drilling method. A fatigue analysis of the notched specimens was conducted using the commercial code FE-Safe and different multiaxial fatigue criteria to predict fatigue lives of samples with and without LSP. The residual stress field produced by the LSP process was estimated by a finite element simulation of the process. A good comparison of the predicted and experimental fatigue lives was observed. The beneficial effect of LSP in extending fatigue life of notched components with and without previous damage is demonstrated.