본 연구는 강제진동으로 인해 교량에 발생되는 휨 변위를 효과적으로 완화하는 것이 목적이다. 단순보의 휨거동 제어를 위하여 스프링과 mass의 관계를 결합한 CTMD(Combine Tuned Mass Damper)를 개발하였다. 개발한 CTMD는 교량의 특성에 따라 질량비의 조절이 가능하도록 CTMD 내부의 Mass를 가감할 수 있는 Mass slot과 Mass block을 설계 제작하였다. CTMD에 적용된 Spring의 최대하중은 33.15N으로 고정하였다. 개발된 CTMD의 성능을 평가하기 위하여 길이 10m, 폭 0.6m, 높이 0.74m인 단순보를 제작하였다. 단순보의 지점조건은 한단 힌지, 한단 롤러로 구성하였다. 실험 방법은 단순보의 중앙에 CTMD를 설치하고 Mass를 조절하여 질량비에 변화를 주어 실험하였다. 이때 질량비에 따른 휨 거동 제어효과는 단순보의 중앙에 설치한 LVDT를 이용하여 측정하였다. 가진 조건은 단순보의 최대 휨 거동을 유발시키기 위하여 단순보의 힌지단에서 1.25m 떨어진 곳에 관성형가진기를 설치하여 3Hz로 흔들었다. 실험 결과 최적의 질량비가 2.1일 때 휨 거동 변위의 감쇠율이 약 71.2%로 최상의 제어효과를 나타내는 것으로 확인되었다.
교정용 브라켓과 강선 사이의 마찰저항력에 영향을 미치는 요소들 중 브라켓 슬롯의 표면조도에 대한 연구가 그동안 많이 시행되어 왔는데 기존 연구는 주로 주사전자현미경(SEM)이나 Prophylometer를 사용하여 이루어졌다. 이 연구는 원자현미경(AFM)을 사용하여 다섯 종류의 브라켓 슬롯의 표면조도를 정량적으로 측정하여 세라믹 브라켓이 스테인리스 스틸 브라켓보다 더 거칠고 다결정 알루미나 브라켓이 단결정 알루미나 브라켓보다 더 거친지 규명하는데 목적이 있다. 대조군인 스테인리스 스틸 브라켓($Succes^{(R)}$)과 두 종류의 단결정 알루미나(Inspire $Ice^{(R)}$, $Perfect^{(R)}$)와 두 종류의 다결정 알루미나(Crystalline $V^{(R)}$, $Invu^{(R)}$)를 슬라이드 글라스에 접착하고 슬롯을 노출시키기 위해 치과용 하이스피드 핸드피스와 샴퍼버를 이용해 윙을 연마하였다. 원자현미경 이미지는 Nanostation $II^{TM}$를 사용하여 관찰하였다. Sa, Sq, Sz 모두 $Invu^{(R)}$와 Inspire $Ice^{(R)}$는 대조군인 $Succes^{(R)}$와 유의미한 차이가 없었으며 $Perfect^{(R)}$와 Crystalline $V^{(R)}$는 $Succes^{(R)}$보다 컸다. $Perfect^{(R)}$와 Crystalline $V^{(R)}$ 사이에서는 Sa, Sq, Sz 모두 유의미한 차이가 없었으며 $Invu^{(R)}$와 Inspire $Ice^{(R)}$ 사이에서도 Sa, Sq, Sz 모두 유의미한 차이가 없었다. 따라서, 대조군인 $Succes^{(R)}$와 단결정 브라켓인 Inspire $Ice^{(R)}$, 다결정 브라켓인 $Invu^{(R)}$가 낮은 조도의 슬롯 표면을 가지고 다결정 브라켓인 Crystalline $V^{(R)}$와 단결정 브라켓인 $Perfect^{(R)}$가 거친 슬롯 표면을 가진 것으로 판단된다. 따라서, 유사한 재질의 브라켓이라도 제조사에 따라 다양한 슬롯 표면조도를 나타낸다고 할 수 있다.
본 논문에서는 차기 군 위성통신망 체계에서 서로 다른 통신 능력을 갖는 이기종 단말을 동일 중계기 대역폭내에서 효과적으로 통합하여 운용하기 위해 전력제어를 적용한 MF-TDMA 자원할당기법을 제안한다. 제안하는 알고리즘은 burst 크기 결정 단계와 burst 구조 결정단계의 2단계로 수행된다. 먼저 burst 크기 결정 단계에서는 각 단말의 채널 상태를 기반으로 링크 버짓을 분석하여 적용 가능한 ACM 레벨과 이에 따른 burst 크기를 결정한다. 다음으로 burst 구조 결정단계에서는 앞서 도출된 각 단말 별 burst 크기를 기반으로 시간-주파수 축 상에서 할당 가능한 burst 구조를 도출하고 각 구조 별 가용 Power spectral density(PSD) 구간을 계산한다. 이기종 단말을 단일 중계기로 통합하기 위해 각 burst의 가용 PSD 구간 내에서 전력제어를 수행하며, 동일 PSD 구간을 갖는 burst를 그룹화하여 MF-TDMA 프레임 내에 할당한다. 추가적으로 할당되지 못하고 남는 슬롯에 대한 자원할당 효율을 향상시키기 위해 설정된 PSD 구간 내에서 ACM 레벨을 조절하여 빈 슬롯을 활용할 수 있는 방안을 적용하였다. 제안하는 알고리즘은 주파수 사용효율, 슬롯할당 거부율 및 burst packing 효율 측면에서 기존 방식과 비교하였으며, 기존 방식에 비해 우수한 성능을 제공함을 확인하였다.
콘텐츠의 디지털화와 네트워크의 광대역화로 인한 다매체 다채널 환경은 광고시장에도 많은 변화를 초래하고 있다. 콘텐츠 유통 윈도우로서의 플랫폼은 증가하고 있지만 이를 장악하는 미디어는 제작능력과 자본능력을 보유한 소수의 매체라는 점에서 증가하는 플랫폼을 통한 추가 광고의 수익은 대부분 이들 거대 독점 미디어에 쏠려 있는 것이 현실이다. 여기에 미디어렙 법안이 국회 본회의를 통과하면서 일부 미디어에 편중된 광고시장의 쏠림현상이 가속화될 전망이다. 이와 같은 현실에서 다양한 장르와 실험적인 도전으로 새로운 콘텐츠 제작과 유통의 성장이 예견되고 있는 유료방송시장이 직접적인 영향권에 놓일 전망이다. 따라서 본 연구는 유료방송광고시장의 확대를 위한 방법론과 대안을 제시하고자 한다. 연구의 결과, 간접광고와 가상광고, 광고금지 품목에 대한 개선방안이 제시되었고, 기업과 정부 차원에서 광고시장 확대를 위한 방법론이 제시되었다.
Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.
본 논문에서는 체스판 형태를 갖는 주파수 선택구조를 설계하였다. 주파수 선택구조의 주파수 응답 특성을 변화시키는 변수로서 단위셀을 구성하는 개구면 및 패치의 크기, 간격, 두께의 변화에 따른 주파수 응답 특성 변화를 관찰하였다. 변수의 변화에 따라서 대역 저지 및 대역 통과 특성을 얻을 수 있었으며, 공진 주파수 및 대역폭을 제어할 수 있는 설계 변수를 얻을 수 있었다. 설계 결과를 바탕으로 X-band 공진특성을 갖는 패치 타입의 주파수 선택구조를 두께 1mm의 FR4 기판으로 제작 및 측정하여 설계 결과를 검증하였다. 본 논문에서 제안하는 체스판 형태를 갖는 주파수 선택구조를 사용하게 되면, 원하는 주파수 대역에 따라 주파수를 선택적으로 제어할 수 있는 레이돔과 같은 전자기구조 설계에 유용하게 사용될 것으로 예상된다.
Pile-to-pilecap connection performance is important as Integral abutment bridges (IABs) have no expansion joints and their flexible weak-axis oriented supporting piles take the role of the expansion joint. This connection may govern the bridge strength and the performance against various lateral loads. The intention of this study is to identify crack propagation patterns when the pile-to-pilecap connection is subjected to lateral loadings and to propose novel connections for improved performance under lateral loadings. In this study, eight different types of connections were developed and modeled, using Abaqus 6.12 to evaluate performances. Three types were developed by strengthening the connections using rebar or steel tube: (i) PennDOT specification; (ii) Spiral rebar; and (iii) HSS tube. Other types were developed by softening the connections using shape modifications: (i) cylindrical hole; (ii) reduced flange; (iii) removed flange; (iv) extended hole; and (v) slot hole connection types. The connections using the PennDOT specification, HSS tube, and cylindrical hole were shown to be ineffective in the prevention of cracks, resulting in lower structural capacities under the lateral load compared to other types. The other developed connections successfully delayed or arrested the concrete crack initiations and propagations. Among the successful connection types, the spiral rebar connection allowed a relatively larger reaction force, which can damage the superstructure of the IABs. Other softened connections performed better in terms of minimized reaction forces and crack prevention.
이 논문에서는 수동 성형 구조를 이용한 파장 분할 다중화 방식 (Wavelength division multiplexing:WDM) 기반의 근거리 망에서 가변 길이의 메시지를 효율적으로 전송할 수 있는 동기 예약 프로토콜을 제안한다. 제어 채널은 데이터 채널 상의 메시지 전송을 조절하기 위하여 사용되며, 시간은 고정 길이의 슬롯으로 동기화 되어 있다. 망은 가변 수의 노트를 수용할 수 있으며, 또한 노트의 수의 변화에 무관하게 동작한다. 따라서 어떠한 '새로운' 노드도 망의 초기화 없이 언제든지 망에 접속할 수 있다. 제안된 프로토콜을 이용하면 데이터 채널과 목적지 주소 충돌 현상도 피할 수 있다. 제안된 프로토콜의 성능은 한 슬롯 시간에 대한 여러 가지 종단간 전파 지연의 경우에 대하여 균형점 분석 (EPA) 방식을 이용하여 분석하고 모의 시험을 통하여 분석 결과를 검증한다. 분석 결과에 따르면, 전파 지연이 성능에 상당한 영향을 미치는 것을 알 수 있다.
AIS(Automatic Identification System)는 지난 10년간 해상에서 선박의 안전운항을 위해 광범위하게 사용되어 왔다. 이에 따라 AIS에서 사용하는 VHF 대역의 데이터 링크에서 통신량도 꾸준하게 증가하고 있다. AIS 디이터 트래픽의 증가는 AIS 서비스 통신품질의 저하를 야기할 수 있다. 국내 주요항만에서 AIS 통신량의 현황분석을 통하여 통신증가의 문제점을 지적한 바는 있지만 이에 대한 대책을 제시한 연구결과는 없다. 본 연구에서는 해상에서 AIS 기지국 장치에서 제공하는 메시지를 이용하여 AIS 기지국의 통신슬롯의 점유율을 분석하는 분석방법과 그 분석정보를 이용한 AIS 기지국의 자동 제어방안을 제시하고자 한다.
This study was conducted to develop a large-scale rice polisher with double polishing stages for producing clean rice with high quality in rice processing complexs. The performance of the developed rice polisher was evaluated and improved. The results obtained from this study were as followings : 1. A large-scale rice polisher with double polishing stages was developed, which consisted of two polishing chambers(polishing part I and II), two spraying parts, a feeding part, power of 37kW, control panel, etc. Especially, the purpose of polishing part Iwere to uniformly mix white rice sprayed with water and to remove bran particles from the rice. the roller surface of the polishing part I was coated with chromium. 2. The capacity of the developed rice polisher was 4t/h. The broken rice rate of the polisher was less than 0.2%, compared with about 1% of others. 3. The whiteness increment of the developed polisher was 2.6~3.0% compared with about 2.3~2.5% of others. 4. The energy consumption of the developed polisher was 0.5kWh/100kg. 5. The developed polisher was improved with the angle change of screen slot of the polishing chamber I. The broken rice rate was reduced from about 0.5% to about 0.2% as the max. internal pressure of the polishing chamber II decreased by 0.4kg/$\textrm{cm}^2$ due to the increase of resistance in the polishing chamber I. The whiteness of the polisher showed more than 38~39. 6. The developed rice polisher showed high performance, compared with other domestic and foreign polishers.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.