DOI QR코드

DOI QR Code

Studies on the Recovery of Useful Materials from Disposable Diaper Waste using Pilot Stock Preparation Units

파일럿 지료 조성설비를 이용한 폐 일회용 기저귀의 유용성분 회수에 관한 연구

  • Lee, Tai Ju (Changgang Institute of Paper Science and Technology) ;
  • Nam, Yoon Seok (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Park, Jeong Eun (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Jo, Jun Hyung (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Ryu, Jeong Yong (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Lee, Ho Sun (Yuhan-Kimberly)
  • 이태주 (창강제지기술연구소) ;
  • 남윤석 (강원대학교 산림환경과학대학 제지공학과) ;
  • 박정은 (강원대학교 산림환경과학대학 제지공학과) ;
  • 조준형 (강원대학교 산림환경과학대학 제지공학과) ;
  • 류정용 (강원대학교 산림환경과학대학 제지공학과) ;
  • 이호선 (유한킴벌리)
  • Received : 2015.07.30
  • Accepted : 2015.08.22
  • Published : 2015.08.30

Abstract

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.

Keywords

References

  1. Choi, Y. Y., A comparative study of environmental aspects about between disposable diaper and service laundered cloth diaper, 2nd Collection of Environmental Papers of Graduated Students, Kyobo Foundation for Education, pp. 402-403 (2006).
  2. Lee, T. J., Choi, D. C., Nam, Y. S., Jo, J. H., Lee, H. S., and Ryu, J. Y., Studies on the pulping conditions of separating valuable components from disposable diaper waste, Journal of Korea TAPPI 47(2):1-8 (2015).
  3. Amand, F. J. S., Perrin, B., and Guillouty, J. L., Development of laboratory pulping and screening equipment for automative waste paper quality control, Revue A.T.I.P. 51(2):90-96 (1997).
  4. Zhao, Y., Su, H., Fang, L., and Tan, T., Superabsorbent hydrogels from poly (aspartic acid) with salt-, temperature-, and pH-responsiveness properties, Polymer 46(14):5368-5376 (2005). https://doi.org/10.1016/j.polymer.2005.04.015
  5. Vitori, C. M., Stock velocity and stickies removal efficiency in slotted pressure screens, Pulp Paper Canada 94(12):109-114 (1993).