• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.375-384
• /
• 2022

The variation of the undrained shear strength (c_u) is an important consideration for assessing slope stability in engineering practice. Previous studies focused on the three-dimensional (3D) stability of slopes in normally consolidated clays generally assume the undrained shear strength increases linearly with depth but does not vary in the horizontal direction. To assess the 3D stability of slopes with spatially varying undrained shear strength, the kinematic approach of limit analysis was adopted to obtain the upper bound solution to the stability number based on a modified failure mechanism. Three types failure mechanism: the toe failure, face failure and below-toe failure were considered. A serious of charts was then presented to illustrate the effect of key parameters on the slope stability and failure geometry. It was found that the stability and failure geometry of slopes are significantly influenced by the gradient of c_u in the depth direction. The influence of c_u profile inclination on the slope stability was found to be pronounced when the increasing gradient of c_u in the depth direction is large. Slopes with larger width-to-height ratio B/H are more sensitive to the variation of c_u profile inclination.

• Geomechanics and Engineering
• /
• 제37권1호
• /
• pp.1-8
• /
• 2024

Buckling failure is one of the classical types of catastrophic landslides developing on inclination-paralleled rock slopes, which is mainly governed by its self-weight, earthquake and ground water. However, nearly none of the existing studies fully consider the influence of slope self-weight, earthquake and ground water on the mechanical model of buckling failure. In this paper, based on energy equilibrium principle and elastoplastic slab theory, a thorough mechanical analysis on bucking slopes has been carried out. Furthermore, an analytical solution for slip bucking failure of rock slopes has been proposed, which fully considers the effect of slope self-weight, seismic force and hydrostatic pressure. Finally, the methodology is used to conduct comparative analysis with other analytical solutions for three practical buckling studies. The results show that the proposed approach is capable of providing a more accurate and reasonable evaluation for stability of rock slopes with potential buckling failure.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.47-78
• /
• 1999

About 440,000 $\textrm{km}^2$, about twice the size of the Korean Peninsula is covered by loess deposits in China. Along the middle reaches of the Huanghe River, mainly in Shaanxi and in Gansu province loess plateau covers vast area amounting to 273,000 $\textrm{km}^2$ Chinese studies on loess and loessial slopes are summarized. And some of the U. S. study and others are also presented for comparison.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.411-418
• /
• 2000

With the limited amount of budget and time, it is required to determine the priority of investment when there are a large number of hazardous slopes. In this paper, the Rock Slope Risk Rating System is developed based on the combination of the hazard of failure and the damage potential. By applying the proposed rating system to 253 rock slopes in Korean National Highway, it was possible to determine the priority of investment on road cut slopes.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.150-157
• /
• 1997

Various analytical, empirical and theoretical methods for slope stability assessment were applied on slopes to develop aggregate quarry optimally. Among them are block theory, stereographic analysis, RMR, SMR, limit equilibrium method and maximum likelihood. Test site was estimated that slopes were apt to fail although rock quality was good. Modified direction and dip angle was suggested for stability. To reduce the overbreak and to improve the stability, the vertical blasting was recommended for new subground level.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.129-144
• /
• 2003

Generally, investigation methods of cut slope are conducted only geological surface survey to gain engineering geological data of cut slopes. These methods have many problems such as limitations of investigation for a special area. So geophysical investigations such as geotomography, seismic and electrical resistivity methods have been used to search for failure surface in potential failure slopes or failed slopes. But investigation method using the borehole camera is recently a used method and it is thought that this method is more reliable method than other investigation methods because of being able to see by the eyes. Therefore, this paper was conducted investigations of borings and BIPS(Borehole Image Processing System) to search for potential sliding surfaces and was applied to obtain information of discontinuity on failed and potential failure slope in highway. As the results of BIPS, we could decide potential sliding surface in the slope, conducted to check slope stability and decided slope stability measures.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 학술발표집 신소재, 신기술에 의한 사면안정이론과 시공사례
• /
• pp.25-48
• /
• 1994

산이 많은 우리나라에서는 산지를 절개하여 주택단지나 도로를 개설하는 경우가 많이 있다. 일반적으로 절취사면은 얄은 토충과'그 아래 풍화도가 다른 암반으로 구성된다. 이러한 절취사면이 강우로 인해 붕괴되는 일이 가끔 발생하므로, 강우시의 유출과 지반 침투로 인해 활동가능성이 중대되는 원인을 이 논문에서 자세히 기술하였다. 또한 지질 공학적인 측면에서 불연속면의 발달을 상세히 조사하여 이것을 설계에 반영함으로서 더욱 합리적인 설계가 될 수 있다는 것을 강조하였다.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.61-66
• /
• 2016

Many cut slopes are located along national roads, there were the collapse of cut slopes. In this study, the weights for condition evaluation of rock slopes was calculated using the entropy method and analytic hierachy process(AHP) method. The entropy analysis was performed using 95 cut slope data, and the AHP analysis was performed by a questionnaire to several expert. The weights based on analysis results were compared with evaluation weights of existing standard. As a result of this study, there was the difference of weights among the analytical methods. Later on, if this study's results is used to improvement current evaluation weights, it will be possible to perform the reliable condition evaluation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.348-351
• /
• 2006

Initial results of processing data from an experiment performed in November, 2005 are given. A microwave Doppler radar with a knife-like beam ($1.5^0$ - $24.5^0$) was installed on a helicopter. Measurements were made during a flight above the Gorky water storage basin. Power and Doppler spectra of the radar reflected signal were analyzed. The processing has shown that the algorithm developed for the retrieval of the slopes of rough water surface enables one to determine the direction of wave propagation and retrieve the variance of the wave slopes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.151-158
• /
• 2000

A database program, named SLOPMAN, was developed to collect all the information on the slopes with potential hazard around railroad and to setup the effective management system. SLOPMAN is composed of three modules: data control, search and analysis. The program is able to store both text and image data and operated with tabs for the users' ability and convenience. Drop-down menu is equipped to reduce errors and the number of key strokes when inputting data. Searching data is made by codes automatically given to slopes or key words. In the analysis module, RMR and SMR values can be obtained to estimate the stability of slopes.