• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.366-371
• /
• 1988

A parallel-plate waveguide with a slit in its upper plate is analysed. An integral equation is formulated for the equivalent magnetic current and solved by the conventional moment method. Numerical results are presented for the magnetic current, reflection and transmission coefficients, a normalized radiated power in the slit, and equivalent circuit parameters. The equivalent circuit parameters are an useful quantities in the study of the E-plane coupled microstrip antennas.

• 한국전자파학회논문지
• /
• 제17권6호
• /
• pp.501-510
• /
• 2006

본 논문에서는 플랜지된 평행 평판 도파관의 슬릿을 통한 도체 스트립과의 전자기적인 결합을 연구하였다. 슬릿의 전계와 스트립의 유기 전류에 관한 결합 적미분 방정식을 유도하고 모멘트 방법으로 풀었다. 몇 가지 슬릿을 통한 최대 결합 현상들의 특성을 도체 스트립의 위치, 동작 주파수, 스트립의 길이 등 다양한 파라미터에 대한 슬릿의 등가 어드미턴스와 결합 전력의 변화를 통해 조사하였다.

• Structural Engineering and Mechanics
• /
• 제75권2호
• /
• pp.229-237
• /
• 2020

The steel slit shear wall (SSSW), made by cutting vertical slits in a steel plate, is increasingly used for the seismic protection of building structures. In the domain of thin plate shear walls, the out-of-plane buckling together with the potential fracture developed at slit ends at large lateral deformation may result in degraded shear strength and energy dissipation, which is not desirable in view of seismic design. To address this issue, the present study proposed a new type of SSSW made by intentionally introducing initial out-of-plane folding into the originally flat slitted plate. Quasi-static cyclic tests on three SSSWs with different amplitudes of introduced out-of-plane folding were conducted to study their shear strength, elastic stiffness, energy dissipation capacity and buckling behavior. By introducing proper amplitude of out-of-plane folding into the SSSW fracture at slit ends was eliminated, plumper hysteretic behavior was obtained and there was nearly no strength degradation. A method to estimate the shear strength and elastic stiffness of the new SSSW was also proposed.

• 한국전자파학회논문지
• /
• 제25권7호
• /
• pp.767-773
• /
• 2014

본 논문에서는 무한 도체 평판의 슬릿 부근에 도체판을 부가하여 슬릿으로 침투하는 전자파의 저감 특성을 검토하였다. 이론 해석에는 FDTD 법을 사용하였으며, 부가 도체판의 형상 및 길이, 간격, 두께의 변화에 따른 침투 전계의 특성을 계산하여 부가 도체판의 구조 변화가 침투 전자파의 저감 특성 및 차폐 효과 특성에 미치는 영향을 고찰하였다. 그 결과, 부가 도체판의 구조 변화에 따라 차폐 효과, 침투 전계의 특성이 변화하는 것을 관찰할 수 있었고, 침투 전계를 최소로 하는 부가 도체판의 최적 구조가 있음을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권4호
• /
• pp.648-656
• /
• 2004

In this study, a highly efficient shell-and-tube heat exchanger with plate fins is considered to improve thermal performance of the conventional shell-and-tube heat exchanger. This type of shell-and-tube heat exchanger with plate fins of various shape is simulated three-dimensionally using a commercial thermal-fluid analysis code. CFX4.4. The effect of the shape of the plate fin on heat transfer characteristics is also investigated by the simulation. Plate fins of four different shapes. plane, plane-slit. wave. and wave-slit fins, are considered. The flow fields, pressure drop and heat transfer characteristics in the heat exchanger are calculated. It is proved that the shell-and-tube heat exchanger with plate fins is superior to the conventional shell-and-tube heat exchanger without plate fins in terms of heat transfer. The shape of the plate fin is important in the performance of a heat exchanger such as heat transfer and pressure drop.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.69-77
• /
• 2017

This paper introduces an optical encoder using the reflection in the slit. The digital optical encoder is a sensor to generate a pulse according to the displacement. An optical encoder is composed of 3 parts: light source, slit plate and light-receiving element. In a conventional encoder, one slit produces one signal. The resolution of the digital optical encoder is determined by the number of slits in the encoder plate. The small slit size is most important among the factors that determine the resolution in a generic-type optical encoder. However, a small slit has low productivity and technical difficulties, so analog optical encoders have emerged as an alternative. Nonetheless, this alternative requires additional circuitry and equipment because of the noise and drafts in the analog signals. A new sensor is presented in this paper with a high resolution and a slit of the same size using the reflection in the slit. Then, the path of the light that passes through the slit ccording to the shape was analyzed, and some paths were expressed in the mathematical expressions. In addition, the optical paths were analyzed in the rectangular, octagonal, and circular encoders, and shown the obtained number of signals per slit by using them. Thus, we confirm that this method has the best performance in circle-shaped slits.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.552-559
• /
• 2005

The resistance of a structure against an earthquake is related to its ability to absorb the seismic input energy. The development of devices for dissipating the seismically induced energy on the structure is a subject that is receiving large attentionin the field of earthquake engineering. One example of these devices is the steel plate with slits. In this paper, a connection with a slit-type steel plate damper installed at each ends of wide-flange section beam, as an energy absorption element, was proposed. A series of experiment was performed to investigate their behavior and structural characteristic. The main parameters were the aspect ratio of the struts in slit plates, thickness of the struts and height of the vertical plates. Test results indicated that most of the energy was absorbed by plastic deformation of slit plate dampers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.68-70
• /
• 1987

A parallel-plate waveguide with a slit in its upper plate is analysed. The magnetic current induced in the slit is obtained by making use of the conventional moment method. From knowledge of the magnetic current, quantities of interest such as reflection coefficient and transmission coefficient are computed.

• 한국전자파학회논문지
• /
• 제14권4호
• /
• pp.384-392
• /
• 2003

본 연구에서는 유전체 슬랩으로 덮힌 평행평판 도파관의 좁은 슬릿을 통한 유전체슬랩 위의 도체 스트립과의 전자기적인 결합을 고려하였다. 제안된 구조에서 관찰되는 두 가지의 대조적인 결합현상인 캐비티형 결합과 기생형 결합의 차이점을 도체 스트립의 길이 및 위치, 도체 스트립에 유기된 전류, 복사패턴, 대역폭, 결합슬릿 근처의 전자계분포 등을 비교하여 관찰하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.323-327
• /
• 2006

In this paper a new wire-wire discharge system with a slit dielectric harrier has been proposed, and, its corona discharge and ozone generation characteristics have been investigated experimentally. When the slit mica barrier is installed between corona wires, instead of the grounded plate electrode, a significant increase in the generation of ozone, about 2.2 times higher than that of the conventional ones without the slit harrier, could be obtained. Photographs show that this type of discharge system with a slit barrier was found to produce a corona discharge twice, once from the upper and bottom corona wires, and. again from both sides of surfaces and slits of the slit barrier. As a result, the proposed discharge system has the potential to increase significantly ozone production and it may be useful as an effective means for removing pollutant gases.