• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.313-336
• /
• 1997

Nineteen stimulus photograghs varied in hue and color scheme of one clothing style of Korean dress worn by a female were used to investigate the effect of color color scheme and structure on impression formation for Korean dress. Subjects were 77 male and 86 female undergraduate and graduate students. The stimuli c9onsisted of two sets(cool and warm) of four similar color schemes two sets (cool and warm in Chima color) of five contrasting color schemes and one extra stimulus triad 3 hue base. Structures were de-fined by color schemes of Kit.Korum toward the color schemes of Jokori and Chima. Stimu-lus photogragh selected from Korean dress fashion magazines was managed and varied in hues and color schemes to Kit Korum Jokori and Chima according to Korean Standard Color through scanning and Adobe photoshop 3.0 program and then pictured through slide printer(HR-6000). Each subject assessed 19 stimulus color photographs with incorporated 7 point semantic differential response scale. The data were analyzed by frequency mean factor analysis t-test ANOVA and Scheffe test. Results indicate impression ofrmations are af-fected by clothing cues. 1) Four factors emerged to account for dimensional structure of impressions of female features on Korean dress. These four factors were titled as(1) preference.evaluation (2) individuality.attention (3) youth and (4) friendshio. The preference.evaluation factor was the largest including eleven adjectives and accounting for 29.62% of the variances. 2) Almost every clothing cue(color, color scheme, structure) had some effects on im-pressions formed But the color of Chima did not form the effects on impression of prefer-ence.evaluation factor. The effect of related color scheme was the most influential clothing cue on impressions of preference.evalation factor and friendship factor whereas the ef-fect of contrasting color scheme was the most influential clothing cue on impressions of indi-viduality.attention factor and youth factor. The effect of cool color of Chima was the most influential clothing cue on impression of indi-viduality.attention factor whereas the effect of warm color of Chima was the most influen-tial clothing cue on impressions of youth factor and friendship factor. The effect of Jokori/Chima.Kit.Korum structure was the most influential clothing cue on impressions of pref-erence.evaluation factor and youth factor whereas the effect of Kit.Korum/Jokori.Chima structure was the most influential clothing cue on impressions of individuality.attention factor and friendship factor. 3) The interaction effects were appeared among clothing cues. Significant interaction effects between color schemes(similar and contrasting) and colors of Chima(cool and warm were appeared on impressions of prefer-ence.evaluation factor imdividuality.atten-tion factor and friendship factor, Significant interaction effects between color schemes (similar and contrasting) and structures (Jokori.Chima.Kit.Korum; Jokori.Kit.Koru-m/Chima;Jokori/Chima.Kit.Korum;Kit.Korum/Jokori.Chima) were appeared on impressions of preference.evaluation factor youth factor and friendship factor. Signifi-cant interaction effects between colors(cool and warm) and structures were appeared on impressions of individuality.attention factor youth factor and friendship factor. Sighifi-cant interaction effects between colors(cool and warm) and structures were appeared on impressions of individuality.attention factor youth factor and friendship factor. Significant interaction effects among clothing cues(color color schemes and structures) were appeared on all impression factors. The friendship factor was the most friquently affected impression factor by interaction effects among clothing cues. In summary the clothing was used as nonverbal cues in the effect on impression for-mation of female dressed in Korean dress. it concluded that color schemes worked as cen-tral traits and colors of Chima and structures worked as peripheral traits in the formation of impression of the female clothed in Korean dress. hence organizing our impressions with respect to the parts of the Korean dress in re-lation to the whole holistic perceptual pro-cess Gestalt approach was used and supported.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.179-192
• /
• 2014

Keeping in line with the recent changes in the information technology environment, the online learning environment that supports multiple users' participation such as MOOC (Massive Open Online Courses) has become important. One of the largest professional associations in Information Technology, IEEE Computer Society, announced that "Supporting New Learning Styles" is a crucial trend in 2014. Popular MOOC services, CourseRa and edX, have continued to build active learning environment with a large number of lectures accessible anywhere using smart devices, and have been used by an increasing number of users. In addition, collaborative web services (e.g., blogs and Wikipedia) also support the creation of various user-uploaded learning materials, resulting in a vast amount of new lectures and learning materials being created every day in the online space. However, it is difficult for an online educational system to keep a learner' motivation as learning occurs remotely, with limited capability to share knowledge among the learners. Thus, it is essential to understand which materials are needed for each learner and how to motivate learners to actively participate in online learning system. To overcome these issues, leveraging the constructivism theory and collective intelligence, we have developed a social bookmarking system called WeStudy, which supports learning material sharing among the users and provides personalized learning material recommendations. Constructivism theory argues that knowledge is being constructed while learners interact with the world. Collective intelligence can be separated into two types: (1) collaborative collective intelligence, which can be built on the basis of direct collaboration among the participants (e.g., Wikipedia), and (2) integrative collective intelligence, which produces new forms of knowledge by combining independent and distributed information through highly advanced technologies and algorithms (e.g., Google PageRank, Recommender systems). Recommender system, one of the examples of integrative collective intelligence, is to utilize online activities of the users and recommend what users may be interested in. Our system included both collaborative collective intelligence functions and integrative collective intelligence functions. We analyzed well-known Web services based on collective intelligence such as Wikipedia, Slideshare, and Videolectures to identify main design factors that support collective intelligence. Based on this analysis, in addition to sharing online resources through social bookmarking, we selected three essential functions for our system: 1) multimodal visualization of learning materials through two forms (e.g., list and graph), 2) personalized recommendation of learning materials, and 3) explicit designation of learners of their interest. After developing web-based WeStudy system, we conducted usability testing through the heuristic evaluation method that included seven heuristic indices: features and functionality, cognitive page, navigation, search and filtering, control and feedback, forms, context and text. We recruited 10 experts who majored in Human Computer Interaction and worked in the same field, and requested both quantitative and qualitative evaluation of the system. The evaluation results show that, relative to the other functions evaluated, the list/graph page produced higher scores on all indices except for contexts & text. In case of contexts & text, learning material page produced the best score, compared with the other functions. In general, the explicit designation of learners of their interests, one of the distinctive functions, received lower scores on all usability indices because of its unfamiliar functionality to the users. In summary, the evaluation results show that our system has achieved high usability with good performance with some minor issues, which need to be fully addressed before the public release of the system to large-scale users. The study findings provide practical guidelines for the design and development of various systems that utilize collective intelligence.

• The Korean Journal of Blood Transfusion
• /
• v.23 no.2
• /
• pp.127-135
• /
• 2012

Background: Despite modern advances in laboratory automated medicine, work-process in the blood bank is still handled manually. Several automated immunohematological instruments have been developed and are available in the market. The IH-1000 (Bio-Rad Laboratories, Hercules, CA, USA), a fully automated instrument for immunohematology, was recently introduced. In this study, we evaluated the performance of the IH-1000 for ABO/Rh typing and irregular antibody screening. Methods: In October 2011, a total of 373 blood samples for ABO/Rh typing and 303 cases for unexpected antibody screening were collected. The IH-1000 was compared to the manual tube and slide methods for ABO/Rh typing and to the microcolumn agglutination method (DiaMed-ID system) for antibody screening. Results: For ABO/Rh typing, concordance rate was 100%. For unexpected antibody screening, positive results for both column agglutination and IH-1000 were observed in 10 cases (four cases of anti-E and c, three of anti-E, one of anti-D, one of anti-M, and one of anti-Xg) and negative results for both were observed in 289 cases. The concordance rate between IH-1000 and column agglutination was 98.7%. Sensitivity and specificity were 90.9% and 99.3%, respectively. Conclusion: The automated IH-1000 showed good correlation with the manual tube and slide methods and the microcolumn agglutination method for ABO-RhD typing and irregular antibody screening. The IH-1000 can be used for routine pre-transfusion testing in the blood bank.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.27-30
• /
• 2008

Purpose: This research is that $V_2O_5$ cathode's composition is possible in low temperature. Methods: Transparent in visible spectra range and crystallographically amorphous $V_2O_5$ thin films were prepared by simple vacuum thermal evaporation on soda-lime-silica slide glass substrate. After annealing at 100$^{\circ}C$, 150$^{\circ}C$ and 200$^{\circ}C$ for 10 minutes in air, the surface morphology and the fracture-cross section of the films were investigated by field emission - scanning electron microscope. Transmittance in visible spectra range and surface roughness of the films were analyzed by ultra violet - visible spectrophotometer and scanning probe microscope, respectively. Results: As the increase of annealing temperature from 100$^{\circ}C$ to 150$^{\circ}C$ and 200$^{\circ}C$, transmittance of the $V_2O_5$ films decreased. Optical properties will be fully discussed on the basis of the surface morphological results. Conclusions: Optical transmissivity was superior in case of 100$^{\circ}C$, and could make amorphous $V_2O_5$ thin film that surface quality of thin film did homogeneity.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.235-241
• /
• 2002

The detection of tubercle bacilli (TB) from sputum smear is one of the fast and inexpensive methods for diagnosis of tuberculosis. For this method. sputum smears are usually flexed by heating and stained by acid-fast staining method, and then examined under an optical microscope. Two Procedures are commonly used fur TB staining. One is hot staining and the other is cold staining method. The Ziehl-Neelsen method which is a hot staining method is widely used in Korea because its stained color is more vivid However, the conventional automated stainer has to fix the sputum smear on a slide manually and the stain is not so vivid because it has not heating function. In an effort to save labor and minimize variations in manual staining Procedure. we developed an automated stainer with heating function. The entire staining process is fully automated. from fixation to final washing and drying. With the automated methods, five slides can be flexed and stained in 21 minutes at consistent high quality We compared the concordance rate between the two methods for 91 sputum samples to validate the stain quality of the developed automated stainer. As the results, the concordant rate between the two methods was 95% and there was no significant difference (p>0.05)

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.21-28
• /
• 2003

This study was aimed at suggest a proper planning method to select a optimal forest road network in mountains forest using GIS(Geographic Information System). To examine the field applicability, the method was applied to the National Forest at Mt. Kumsan in Namhae-gun, Gyungsangnam-do. The main results from altogether six alternative road route plans were derived from these criteria obtained the alternative route plan No.2 has two layout criteria, longitudinal gradient and earth work volume, and it showed similar pattern of existing forest road network which was designed mainly ground slope and longitudinal gradient. The alternative route plan No.6 has four criteria, longitudinal gradient, earth work volume, investment effect and landscape impact. It was different for the lowest forest road density among the alternatives and the pattern of the forest road layout was radial form, which was also quite different to other alternatives. For optimal forest road network planning, GIS provide the efficient and resonable solutions for decision making to provide the support for evaluation about various alternative road networks. If detailed inventory and relevant data are provided and also clear and objective indicators for evaluations are set up, it could be applied to preliminary analysis and detail planning stage to prevent undesirable effect such the land slide and soil erosion due to inadequate planning for forest road network.

• Journal of the Korean Geographical Society
• /
• v.46 no.6
• /
• pp.707-723
• /
• 2011

The purpose of this study was to quantitatively evaluate the effectiveness of learning management systems (LMS) in the physical geography class. The study adopted the experimental design and three classes participated in this study. The first class was controlled using only classroom lectures, the second class used PPT slides along with the classroom lectures, and the third class used online video clips along with the lectures. The experiments were conducted from the Spring Semester 2007 to the Spring Semester 2008 for the introductory physical geography course. The study results showed that online learning tools help students improve academic performance and their attitudes towards the class and the instructor. Compared to simple PowerPoint slides, voice recording attached to the visual lecture slide materials enhanced students' motivation. Class lectures with lecture slides did not improve students' scores. However, when the visual materials were combined with voice recording, the number of internet access to online class materials increased, and class attendance and students' final grades were improved. Based on the results, the instructional design model that combines classroom and online learning was suggested.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.119-124
• /
• 2011

Objectives: The purpose of this experiment was to evaluate four different polishing systems of their polishability and polishing time. Materials and Methods: 4 mm diameter and 2 mm thickness Teflon mold was made. Z-250 (3M ESPE) hybrid composite resin was slightly overfilled and pressed with slide glass and cured with Optilux 501 for 40 sec each side. Then the surface roughness (glass pressed: control group) was measured with profilometer. One surface of the specimen was roughened by #320 grit sand paper and polished with one of the following polishing systems; Sof-Lex (3M ESPE), Jiffy (Ultradent), Enhance (Dentsply/Caulk), or Pogo (Dentsply/Caulk). The surface roughness and the total polishing time were measured. The results were analyzed with one-way ANOVA and Duncan's multiple range test. Results: The surface roughness was lowest in Pogo, and highest in Sof-Lex. Polishing times were shortest with Pogo, and followed by the Sof-Lex, Enhance and Jiffy. Conclusions: One-step polishing system (Pogo) is very effective to get the smooth surface in a short time, therefore it can be recommended for final polishing system of the restoration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.417-424
• /
• 2019

Despite its superior ability to show distinct cellular morphology and for long-term storage, conventional tissue fixation by formalin has many drawback, including slower fixation, the exposure to harmful chemicals and extensive protein modification. Herein, we assessed the effects of rapid microwave-assisted tissue fixation on histological examination and on protein integrity by comparing these microwave irradiation fixated tissues with the formalin-fixed tissues. One of the paired mouse tissues (liver and kidney) was fixed in formalin and the other was fixed by using microwave irradiation in phosphate buffered saline. Each slide from the paraffin-embedded tissues was examined by H & E staining for the adequacy of fixation and by immunohistochemical staining for antigenicity in a blinded fashion. Evaluation of protein recovery and the protein quality from the fixed tissues were analyzed by the BCA method and Western blotting, respectively. The results from H & E staining and immunohistochemical staining showed that the sections obtained from microwave-fixed tissues under our experimental conditions were comparable to those of the formalin-fixed tissues except for the integrity of RBCs. Furthermore, proteins were effectively extracted from the microwave-fixed tissues with acceptable preservation of the proteins' quality. Taken together, this microwave-assisted tissue processing yields a quick fixation and better protein recovery in higher amounts, as well as the adequacy of fixation and the antigenicity being comparable to formalin-fixed tissues, and this all suggests that this new fixation technique can be applied in an environment where rapid tissue fixation is required.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.613-623
• /
• 2000

The purpose of this study was to amount of the frictional forces with the brackets and wires, ligation methods, dry/wet, offsets, interbracket distances, velocity and to compare them each other by different conditions. This study tested 0.018'x0.025' slot sized 8 types of orthodontic bracket systems and 0.016', 0.016'x0.022' sized stainless steel, NiTi, Cu-NiTi orthodontic wires. One cuspid bracket were positioned on the slide glass and archwire was engaged into bracket and ligated with elastomeric modules. The values of frictional forces were measured with the instron universal testing machine. The results were as follows; 1. Polycrystalline ceramic bracket had the highest mean frictional forces and followed and by ceramic reinforced plastic bracket, metal bracket, plastic bracket with metal slot, monocrystalline ceramic bracket, single bracket, self-ligating bracket, friction free bracket in descending order. The self-ligating bracket showed low frictional forces in the round wires and high frictional forces in the rectangular wires. 2. Stainless steel wires had the least frictional forces and followed by NiTi, Cu-NiTi wires in descending order. Round wires had lower frictional forces then that of rectangular wires. 3. The stainless steel ligation method had significantly greater mean frictional forces them the elastomeric module ligation method. 4. Artificial saliva statistically increased the frictional forces in stainless steel wire, NiTi wire and Cu-NiTi wire. 5. There was a statistically significant difference with offset change 6. There was no statistically significant difference with interbracket distance in stainless steel wires but a significant difference in NiTi wires as the interbracket was decreased. 7 There was no statistically significant difference with velocity change. From the above findings, self-ligating bracket, stainless steel wires and the elastomeric module ligation method might be effective than any other materials to reduce the frictional forces in the orthodontic treatment and can be correlated to clinical situations seen in orthodontic patient care.