• KIEAE Journal
• /
• v.7 no.2
• /
• pp.31-37
• /
• 2007

Despite of many supportive research to the usefulness of slide evaluation on environment of outdoor lighting, study method of using slides have provoked many discussions of its manifestation of reality of field conditions. This study aims to compare the results of slide survey with that of field survey. Distant view and short range view of nightscape of Seoul were selected. Field measurement of luminance and chromaticity were conducted and questionnaire survey were conducted. Frequency analysis, T-test, factor analysis were conducted. Results shows that distant view and short range view of field survey have better visual atmosphere than slide survey. In addition, slide survey on distant view shows lowest values. Difference between field survey and slide survey on distant view is much bigger than the results of short range view.

• Journal of Veterinary Clinics
• /
• v.13 no.2
• /
• pp.158-162
• /
• 1996

Comet assay 는 포유류 세포에서 DNA의 파괴를 측정하는데 있어 신속하고 단순하며 시각적이고 민감한 방법이다. Apoptosis에서는 세포핵의 광범위한 DNA의 붕괴가 일어나므로 comet assay는 종양세포에서 apoptosis가 발생되었는가를 알아내는데 유용하다. 본 연구는 apoptosis 연구의 결과가 변화되지 않도록 comet assay slides를 좀 더 오래 보관할 수 있는 방법을 개발하고자 시행되었다. 개의 종양세포를 가지고 alkali comet assay를 끝낸 뒤 slides를 진공 건조기에서 꺼내서 증류수로 점적하여 10-20분간 침수시키고 현광현미경하에서 육안적으로 관찰하였다. 건조후 3-4일, 1주, 2주, 3주, 4주 및 7주의 slides에서 apoptosis 회복율(%)은 각각 98.1, 98.3, 99.4, 80.8 및 35.2%이었다. 3주 이내의 slides에서 대조군과 비교하여 apoptosis 회복율에서 차이가 없었으나 4주 이상의 slides를 건조후 침수시키는 방법을 이용하였을 때 apoptosis 평가에서 건조 후 3주간까지는 처음의 결과와 차이가 없으며, 이 방법을 이용하여 comet slide의 좀 더 긴 기간이 보관과 보관후의 재평가에서 이용될 수 있는 좋은 방법이 된다.

• Journal of the Korean housing association
• /
• v.8 no.1
• /
• pp.37-48
• /
• 1997

The purpose of this study supply data that can make a living room a more comfortable space by using a plan of furniture usage, that is to say more affective to human's mental and physical character. For this purpose made experiment with slide film on 39 representative descriptions. The object of this research was female university students and to analyze the data. factor analysis. One-way ANOVA and scheffe-test were used by running SPSS PC+ program. The major results are as follows. In experiment with slide film for grasping spatial effect and evaluation on the 39 representative descriptions, three dimensions(clearness. openness. variety) extracted as the result of factor analysis. Especially the result of this study - sizes of space put independent valuables and each demotion put dependent valuables - shows differences according to space’ size.

• Transactions of Materials Processing
• /
• v.26 no.5
• /
• pp.277-285
• /
• 2017

Vehicle weight reduction is a known strategy to improve fuel efficiency and strengthen exhaust gas regulation. The use of high strength steel can satisfy safety, efficiency, emission, manufacturability, durability, and cost requirements. However, springback of high strength steel results in undesired shape defects. Springback is one of the most important issues of high strength steel for many applications in an automobile. Servo press has various capabilities to improve defects, process conditions, and productivity problems when forming a high strength steel. Especially, servo press can be set to function with variable slide motion in a single operation. In this study, the effect of servo press slide motion on 980MPa high strength steel was investigated through U-bending test.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.590-595
• /
• 2006

This paper presents the friction and anti-wear characteristics of nano-oil with a mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear using nano-oil are evaluated using the thrust bearing tester for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and orbiting speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing orbiting speed and normal force. The friction coefficient of carbon nano-oil is 0.015, while that of pure oil is 0.023 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oil enhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.180-188
• /
• 1994

Error assessment and evaluation for machine for machine tool slides have been considered as essential tools for improving accuracy. In this paper, a computer aided measurement technique is proposed using photo pin diodes of quadrant type and laser source. In thedeveloped system, three photo diodes are mounted on a sensor mounting table, and the sensored signal is processed by specially designed signal conditioner to give fine resolution with minimum noise. A micro computer inputs the processed signal, and the geometric errors of five degree of freedoms are successfully evaluated. Pitch, roll, yaw, vertical and horizontal straightness errors are thus assessed simultaneously for a machine tool slide. Calibration techniques such as optics calibration, photo diode calibration are proposed and implemented, giving precise calibration for the measurement system. The developed system has been applied to a practical machine tool slide, and has been found as one of efficient and precise technique for machine tool slide.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.176-187
• /
• 2005

This paper presents an evaluation of joint configurations of a robotic finger based on kinematic analysis. The evaluation is based on an assumption that the current control methods for the fingers require that the contact state specified by the motion planner be maintained during manipulation. Various finger-joint configurations have been evaluated for different contact motions. In the kinematic analysis, the surface of the manipulated object was represented by B-spline surface and the surface of the finger was represented by cylinders and a half ellipsoid. Three types of contact motion, namely, 1) pure rolling, 2) twist-roiling, and 3) slide-twist-rolling are assumed in this analysis. The finger-joint configuration best suited for manipulative motion is determined by the dimension of manipulation workspace. The evaluation has shown that the human-like fingers are suitable for maintaining twist-rolling and slide-twist-rolling but not for pure rolling. A finger with roll joint at its fingertip link, which is different from human fingers, proved to be better for pure rolling motion because it can accommodate sideway motions of the object. Several kinds of useful finger-joint configurations suited for manipulating objects by fingertip surface are proposed.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.121-125
• /
• 2012

This paper presents the friction and anti-wear characteristics of nano-oil with a mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the thrust bearing experimental apparatus for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and rotating speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing rotating speed and normal force. The friction coefficient of carbon nano-oil is 0.023, while that of pure oil is 0.03 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oil enhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.1219-1224
• /
• 2006

This paper presents the friction and anti-wear characteristics of nano-oil with n mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear Lising nano-oil is evaluated using the thrust bearing tester for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and orbiting speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing orbiting speed and normal force. The friction coefficient of carbon nano-oil is 0.015, while that of pure oil is 0.023 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oilenhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.312-320
• /
• 1998

The purpose of this study is to investigate and compare the validity of various visual simulation methods with or without sounds and videos of the landscapes The landscape evaluation through such media as color slide, color slide with sounds, video and video without sounds are compared with on-site evaluaton of the landscape. The results are as follows : ·Video can generally convey the feelings for the real landscapes better than traditonal mathod, i.e., slide without sounds. ·When the sources of sounds are dominant in the view, there are great differences in responses among 4 different media and video can convey the feelings for real landscapes on site most successfully. ·There are slight differences by landscape types ; in mixed landscapes, there are higher correlations between the on-site estimaton and estimations through media ; in natural landscapes, video can reflect the feelings for real landscapes on site better. ·There is little difference between two shooting methods, fixed shot and pan shot. These results suggest that traditional visual simulation, with slides or photographs, could not reflect the real landscapes in certain situations and the visual simulation method with sounds and videos should be used in such situatios to represent the real landscape better. Especially, when the whole and comprehensive evaluatio of the landscape properties is important, the visual simulation with sounds and videos should be used. And simulation techniques with sounds and videos should be further developed for practial applications.