• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.60-67
• /
• 2008

Treatment of adult patients with Class III malocclusion frequently requires a combined orthodontic and surgical approach. However, if for various reasons, nonsurgical orthodontic treatment is chosen, a stable outcome requires careful consideration of the patient's biologic limitation. This case presents the orthodontic treatment of an adult with a Class III malocclusion, which was treated nonsurgically using indirect skeletal anchorage.

• The korean journal of orthodontics
• /
• v.28 no.2 s.67
• /
• pp.189-201
• /
• 1998

The purpose of this study was to evaluate the characteristics of craniofacial skeleton on orthognathic surgical cases with skeletal Class III malocclusion. For this study, 74 students at the dental college of Chosun University volunteered as a normal occlusion group. They had well-balanced faces and good occlusions with acceptable Class I molar relationship. They had not received orthodontic treatment and had no signs or symptoms of temporomandibular joint dysfunction. 45 malocclusion patients enrolled for orthognathic surgical treatment with skeletal Class III malocclusion at the Department of Orthodontics, College of Dentistry, Chosun University. On the basis of this study. the results of this study were as follows: 1. Skeletal Class III malocclusion was largely due to the overgrowth of mandible in man and the undergrowth of maxilla in woman. 2. The mandible was antero-inferiorly overgrown by large MP-HP angle and large genial angle in orthognathic surgical cases with skeletal Class III malocclusion. And also, upper incisors were severely labioversioned, but on the other hand lower incisors were linguoversioned. 3. In female, lower-third facial height was characteristically shortened in comparison with middle-third facial height and also, lower facial throat angle was small in male.

• The korean journal of orthodontics
• /
• v.52 no.1
• /
• pp.66-74
• /
• 2022

Objective: To investigate demographic and skeletodental characteristics of one-jaw (1J-OGS) and two-jaw orthognathic surgery (2J-OGS) in patients with skeletal Class III malocclusion. Methods: 750 skeletal Class III patients who underwent OGS at 10 university hospitals in Korea between 2015 and 2019 were investigated; after dividing them into the 1J-OGS (n = 186) and 2J-OGS groups (n = 564), demographic and skeletodental characteristics were statistically analyzed. Results: 2J-OGS was more frequently performed than 1J-OGS (75.2 vs. 24.8%), despite regional differences (capital area vs. provinces, 86.6 vs. 30.7%, p < 0.001). Males outnumbered females, and their mean operation age was older in both groups. Regarding dental patterns, the most frequent maxillary arch length discrepancy (ALD) was crowding in the 1J-OGS group (52.7%, p < 0.001) and spacing in the 2J-OGS group (40.4%, p < 0.001). However, the distribution of skeletal pattern was not significantly different between the two groups (all p > 0.05). The most prevalent skeletal patterns in both groups were hyper-divergent pattern (50.0 and 54.4%, respectively) and left-side chin point deviation (both 49.5%). Maxillary spacing (odds ratio [OR], 3.645; p < 0.001) increased the probability of 2J-OGS, while maxillary crowding (OR, 0.672; p < 0.05) and normo-divergent pattern (OR, 0.615; p < 0.05) decreased the probability of 2J-OGS. Conclusions: In both groups, males outnumbered females, and their mean operation age was older. The most frequent ALD was crowding in the 1J-OGS group, and spacing in the 2J-OGS group, while skeletal characteristics were not significantly different between the two groups.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.91-99
• /
• 2024

In the case of skeletal class III edentulous patients, the stability of dentures can be achieved by using a crossbite by considering the residual ridge relationship when fabricating complete dentures. Forming the anterior teeth in a normal occlusal relationship in a skeletal class III ridge relationship may reduce the stability of the denture by increasing the anterior cantilever. However, when patients use complete dentures, not only functional aspects but also aesthetic aspects are important. The aesthetics of complete dentures depends on how the anterior artificial teeth are arranged, and cases of complete denture fabrication using normal occlusion or edge-to-edge bite in edentulous patients with skeletal class III ridge relationships have been reported. In this case, complete dentures were fabricated for an edentulous patient with a skeletal class III edentulous patients by forming anterior edge-to-edge bite considering neutral zone in maxillary anterior teeth, and good aesthetic and functional results were obtained.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.407-412
• /
• 2011

Purpose: The purpose of the present study was to evaluate the postoperative skeletal stability of two-jaw surgery (Le Fort I osteotomy and bilateral sagittal split ramus osteotomy) via surgery first orthodontic treatment (SFOT) in class III malocclusion. Methods: Thirty-two patients who had two-jaw surgery via SFOT were included in this study. Serial lateral cephalograms were obtained before (T0), immediately after (T1), and six months after (T2) surgery. Twelve variables were measured for horizontal and vertical skeletal stability as well as for dental change. All measurements were evaluated statistically by a paired t-test ($P$ <0.05). Results: The mean skeletal changes were $0.1{\pm}2.5$ mm at point A and $-12.0{\pm}7.4$ mm at the pogonion. The mean horizontal relapse was 11.6% at the pogonion, and the mean vertical surgical changes included an upward displacement of $2.1{\pm}7.1$ mm and a forward displacement of $1.4{\pm}4.6$ mm at the pogonion. Upper incisor inclination decreased after surgery and was maintained at T2, and lower incisors were proclined from T1 to T2 by postsurgical orthodontic treatment. Conclusion: Postoperative skeletal stability of two-jaw surgery via surgery first orthodontic treatment in class III malocclusion was clinically acceptable.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.261-266
• /
• 2013

Purpose: This study was performed to investigate the bone thickness of the infrazygomatic crest area by computed tomography (CT) for placement of a miniplate as skeletal anchorage for maxillary protraction in skeletal Class III children. Materials and Methods: CT images of skeletal Class III children (7 boys, 9 girls, mean age: 11.4 years) were taken parallel to the Frankfurt horizontal plane. The bone thickness of the infrazygomatic crest area was measured at 35 locations on the right and left sides, perpendicular to the bone surface. Results: The bone was thickest (5.0 mm) in the upper zygomatic bone and thinnest (1.1 mm) in the anterior wall of the maxillary sinus. Generally, there was a tendency for the bone to be thicker at the superior and lateral area of the zygomatic process of the maxilla. There was no clinically significant difference in bone thickness between the right and left sides; however, it was thicker in male than in female subjects. Conclusion: In the infrazygomatic crest area, the superior and lateral area of the zygomatic process of the maxilla had the most appropriate thickness for placement of a miniplate in growing skeletal Class III children with a retruded maxilla.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.47-56
• /
• 2012

As attractive lips are important component of appealing faces, the study was conducted to investigate the association of mouth-breathing and thickness of lower lips in mouth-breathers and nasal-breathers. The subjects were 436 adolescent patients aged 8~18 years who took cephalometrics. The results were as follows. The ratio of lower lip thickness to that of upper lip thickness in mouth breathing and nasal breathing groups were $1.13{\pm}0.14$, $1.02{\pm}0.14$, respectively. According to subjects' skeletal pattern, the ratio in Class I sample was $1.05{\pm}0.09$. Class II subjects showed $1.20{\pm}0.12$, and Class III showed $0.97{\pm}0.11$. Mouth - breathers had higher lower/upper lip ratio than nasal breathers meaning their lower lips were thicker. Skeletal Class II patients group showed the most thickest lower lips among Class I, II, III subgroups.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.349-357
• /
• 2010

Physical factors and intra- and extra-oral factors of a patient have to be considered in order to decide a treatment plan for the skeletal class III malocclusion patient. Most of cases, the pre-prosthodontic treatment requires the orthodontic approaches and maxillofacial surgery. However, in some cases, patients' economic or medical condition makes impracticable situation for the orthodontic or surgical intervention. For those cases, the compromised prosthetic treatment which provides more stable and persistent occlusal stabilization is recommended. In this case report, a woman patient has a skeletal class III maxillomandibular relationship and misses multiple teeth. The prosthetic treatment without orthodontic and surgical intervention is performed due to her physical problem. The functional and esthetic results are achieved by the fixed prosthesis.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.209-225
• /
• 2002

Enlow's counterpart analysis reflects the characteristics of each individual sample to find out the cause of the malocclusion and further applying them to the clinic. Enlow's counterpart analysis was performed on 100 Korean samples (50 male, 50 female) with normal occlusion and 100 skeletal class III patients (50 male, 50 female) scheduled for orthognathic surgery. The following conclusions were obtained. 1. The cause of malocclusion in skeletal class III patients were complex and interrelated : backward upward rotation of the cranial base, forward inclination of the ramus, increase in the mandibular body length, and posteriorly located maxilla. 2. Seen on R2 (male-1.68mm, female-2.33mm), in skeletal class III, the maxilla Is mote posteriorly located than the normal group. 3. The cause of malocclusion In skeletal class III patients, consists of retrognathic maxilla(A1) male $22\%$, female $26\%$, prognathic mandible(B1) male $44\%$, female $34\%$, and combination of an retrognathic maxilla and prognathic mandible were male $28\%$, female $38\%$. 4. There was no significant difference in the anterior-posterior length of the maxilla(A4) between skeletal class III males with the normal group, while in the female subjects, the skeletal class m group showed a smaller maxilla(A4) compared to the normal group. 5. In skeletal class III patients the proganthic mandible was primarily caused by the Inclination of the ramus(R3, R4) and mandibular body length(B4, B6) rather than ramus width(B3).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.350-359
• /
• 2005

Sagittal split ramus osteotomy(SSRO) has been commonly performed in the mandibular prognathism. The previous studies of the mandibular anatomy for SSRO have mostly been used in dry skull without consideration of age, sex or jaw relationship of patients. This study was performed to evaluate the location of mandibular canal and the anatomy of ramus, such as the location of mandibular lingula and the ramal bone marrow, which were associated with SSRO procedures, in the patients with mandibular prognathism and normal young adults by using computerized tomographs(CT) and 3D images. The young adults at their twenties, who were considered to complete their skeletal growth, and seen in the Department of Orthodontics and Oral and Maxillofacial Surgery in Chonnam National University Hospital between March 2000 and May 2003, were selected. This study was performed in 30 patients (15men, 15women) who were diagnosed as skeletal class I normal relationship, and another 30 patients (15men, 15women) who were diagnosed as skeletal class III relationship upon clinical examination and lateral cephalometric radiographs. The patients were divided into 2 groups : Class I group, the patients who had skeletal class Ⅰ normal relationship(n=30, 15men, 15women), and Class III group, the patients who had skeletal class III relationship(n=30, 15men, 15women). Facial CT was taken in all patients, and pure 3D mandibular model was constructed by V-works version 4.0. The occlusal plane was designed by three points, such as the mesiobuccal cusp of both mandibular 1st molar and the incisal edge of the right mandibular central incisor, and used as a reference plane. Distances between the tip of mandibular lingula and the occlusal plane, the sigmoid notch, the anterior and the posterior borders of ramus were measured. The height of ramal bone marrow from the occlusal plane and the distance between mid-point of mandibular canal and the buccal or lingual cortex of the mandible in the 1st and 2nd molars were measured by V-works version 4.0. Distance(Li-OP) between the occlusal plane and the tip of mandibular lingula of Class III Group was longer than that of Class I Group in men(p<0.01), but there was no significant difference in women between both groups. Distance(Li-SN) between the sigmoid notch and the tip of mandibular ligula of Class III group was longer than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(Li-RA) between the anterior border of ramus and the tip of mandibular lingula of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Distance(Li-RP) between the posterior border of ramus and the tip of mandibular lingula of Class III Group was slightly shorter than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(RA-RP) between the anterior and the posterior borders of ramus of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Longer the distance(SN-AN) between the sigmoid notch and the antegonial notch was, longer the vertical ramal length above occlusal plane, higher the location of mandibular lingula, and shorter the antero-posterior ramal length were observed(p<0.01). Height of ramal bone marrow of Class III Group was higher than that of Class I Group in men and women(p<0.01). Distance between mandibular canal and buccal cortex of Class III Group in 1st and 2nd lower molars was shorter than that of Class I Group in men and women (p<0.05 in 1st lower molar in men, p<0.01 in others). These results indicate that there are some anatomical differences between the normal occlusal patients and the mandibular prognathic patients, such as the anterior-posterior length of ramus, the height of ramal bone marrow, and the location of mandibular canal.