• Food Science and Biotechnology
• /
• 제17권3호
• /
• pp.664-668
• /
• 2008

The diffusivity of aerosol sanitizers may be determined by the weight and droplet size of the aerosol. To test the effects of droplet size, 2 types of aerosol sanitizers were prepared using different ultrasonic nebulizer frequencies (1.6 and 2.4 MHz) and their reduction activities were determined against Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella typhimurium. A sodium hypochlorite aerosol was treated for 10, 30, or 60 min in a model aerosol cabinet. When the aerosol prepared by nebulizing at 1.6 MHz was treated for 30 min, a 0.2 log reduction was observed in E. coli O157:H7 and 0.3 log reductions were exhibited in L. monocytogenes and S. typhimurium, respectively. After 60 min, the 3 pathogens were reduced by 1.7, 0.6, and 0.8 log units, respectively. However, when the aerosol prepared by nubulizing at 2.4 MHz was treated, the microbes presented 1.6, 0.5, and 0.6 log reductions at 30 min, and 1.8, 0.9, and 1.1 log reductions at 60 min of treatment, respectively.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.228-234
• /
• 2016

Copper nanoparticles attract much attention as substitutes of noble metals such as silver and can help reduce the manufacturing cost of electronic products due to their lower cost and good conductivity. In the present work, the chemical reduction is examined to optimize the synthesis of nano-sized copper particles from copper sulfate. Sodium borohydride and ascorbic acid are used as reducing and antioxidant agents, respectively. Polyethylene glycol (PEG) is used as a size-control and capping agent. An appropriate dose of PEG inhibits the abnormal growth of copper nanoparticles, maintaining chemical stability. The addition of ascorbic acid prevents the oxidation of nanoparticles during synthesis and storage. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) are used to investigate the size of the synthesized nanoparticles and the coordination between copper nanoparticles and PEG. For chemical reduction, copper nanoparticles less than 100 nm in size without oxidized layers are successfully obtained by the present method.

• 여성건강간호학회지
• /
• 제9권4호
• /
• pp.457-466
• /
• 2003

Purpose: To provide the epidemiological information for developing preventive programs encourage appropriate eating and weight control behaviors. Method: 349 college students in Seoul were administered self-report question- naires to examine eating habits, trend of disordered eating, weight reduction practice and body size evaluation from September to October 2002. Data were analyzed by SAS program for frequency, t-test, ANOVA with Scheff test. Result: The mean eating score was moderate and it differed by subjects' characteristics. The mean score of EAT-26 was relatively lowered, and 3.4% of the subjects score showed disordered eating behavior. It differed significantly by subjects' general characteristics. 30.4% of total sample were currently trying to lose weight and had interested in trying to lose weight. EAT-26 was significantly different by weight reduction practices and interest. Perceived body size differed by the score of eating habit and EAT-26. Conclusion: It can be suggested weight preoccupation have a relation to eating habits, weight control practice and disordered eating. Further study is recommended educational interventions targeting at-risk subjects.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권5호
• /
• pp.377-381
• /
• 2006

A study was carried out to determine a suitable light intensity and inoculum size for the growth of Rhodopseudomonas palustris strain B1. The pollution reduction of sago effluent using free and immobilised R. palustris cells was also evaluated. The growth rate in glutamatemalate medium was highest at 4 klux compared to 2.5 and 3 klux. The optimal inoculum size was 10% (v/v). Both the COD and BOD of the sago effluent were reduced by 67% after three days of treatment. The difference in biomass production or BOD and COD removal with higher inoculum sizes of 15 and 20% was minimal. This could be attributed to limited nutrient availability in the substrate. The use of immobilised cells of R. palustris reduced the pollution load 10% less compared to pollution reduction by free cells. Hence, there was no significant difference in using free or immobilised cells for the treatment of sago effluent.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.297-302
• /
• 2016

Ag nanoparticles are extensively studied and utilized due to their excellent catalysis, antibiosis and optical properties. They can be easily synthesized by chemical reduction methods and it is possible to prepare particles of uniform size and high purity. These methods are divided into vapor methods and liquid phase reduction methods. In the present study, Ag particles are prepared and analyzed through two chemical reduction methods using solvents containing a silver nitrate precursor. When Ag ions are reduced using a reductant in the aqueous solution, it is possible to control the Ag particle size by controlling the formic acid ratio. In addition, in the Polyol process, Ag nanoparticles prepared at various temperatures and reaction time conditions have multiple twinned and anisotropic structures, and the particle size variation can be confirmed using field emissions scanning electron microscopy and by analyzing the UV-vis spectrum.

• 한국실내디자인학회논문집
• /
• 제27권3호
• /
• pp.136-144
• /
• 2018

The purpose of this study is to examined the unconscious response of the pupil in the observation toward the image in the eye-tracking experiments that target on a large complex cultural space. Twenty-five men participated in this experiment and the observation data were analyzed in seconds per minute on watching time. It could examine the unconscious response of information searching in the change of pupil size in the process of observing the space. The results could be defined as following several points. First, it was possible to outline the unconscious response characteristics of pupil by analyzing sudden changes in pupil size as total, cumulative, and individual. The response characteristics using frequency and time can be utilized as the analytical method to examine the degree of interest of spatial components according to the purpose of analysis in the future. Second, according to the over ${\pm}5%$ of cumulative variation rate on the pupil size change, during in the 60 seconds, the continuous pupil dilation was used 25.2 seconds in 8.8 rounds and the pupil reduction was used 18.0 seconds in 7.0 rounds. Third, when the variation rate of ${\pm}5%$ or more was regarded as the sudden changes on pupil size by individual variation, the pupil dilation was 7.2 rounds of 8.6 seconds and pupil reduction was 6.0 seconds in 5.0 rounds. This means that the pupil increases 9.3% in one expansion and decreases -8.5% in the reduction process. As regarding pupil changes as cumulative rate, it appeared high change rate on pupil reduction but it became higher on pupil dilation in individual.

• 대한소아치과학회지
• /
• 제46권1호
• /
• pp.64-75
• /
• 2019

이 연구의 목적은 임상에서 많이 사용되고 있는 3종의 기성 크라운 즉, 레진관, 레진피복 금속관, 지르코니아 크라운의 크기와 형태를 3차원적으로 계측하여 자연치와 비교함으로써 기성 크라운의 크기 선택과 치질 삭제량에 대한 지침을 얻고자 하는데 있다. 300개의 유전치 석고모델과 3종의 기성 크라운을 대상으로 3D 스캐너와 컴퓨터 이미지 프로그램으로 3차원적 모델을 만들었다. 3차원 모델에서 치관의 근원심 너비, 치관 높이, 치관 ratio, 순면의 곡률반경 등 4가지 평가 척도에 의해 각 기성 크라운별로 한국인 자연치 표준모형과 가장 유사한 형태를 고르고 이를 기준으로 치질 삭제량을 비교, 평가하였다. 유중절치의 경우 기성 크라운별로 레진피복 금속관은 2번, 지르코니아 크라운은 1번, 레진관은 2번이, 유측절치의 경우 레진피복 금속관은 3번, 지르코니아 크라운은 2번, 레진관은 3번이 가장 유사한 형태를 보였다. 치아 삭제량은 상악 유중절치와 유측절치에서 같은 양상을 보였다. 절단연에서는 지르코니아 크라운의 삭제량이 가장 컸다. 인접면은 지르코니아 크라운과 레진관이 비슷한 삭제량을 보였으며 레진피복 금속관에 비해서 컸다. 순면 역시 지르코니아 크라운이 유중절치와 유측절치에서 삭제량이 가장 컸다. 설면의 경우 순면에 비해 전체적으로 삭제량이 적었으며 3종류의 기성 크라운 간에 삭제량 차이도 크지 않았다. 크라운의 형태를 비교하기 위한 4가지 평가 척도 중 치관의 근원심 너비가 기성 크라운의 크기를 선택하는데 가장 중요한 척도로 나타났다.

• 열처리공학회지
• /
• 제15권1호
• /
• pp.16-20
• /
• 2002

In conventional metallothermic reduction(MR) for obtaining tantalum powder in batch-type operation, it is difficult to control morphology and location of deposits because the reaction occurs by direct physical contact between reductants and feed materials. On the other hand, a electronically mediated reaction(EMR) is capable to overcome these difficulties through the reaction by electron transfer and have a merit of continuous process. In this study an MR and EMR method has been applied to the production of a tantalum powder by sodium reduction of $K_2TaF_7$. As the reduction temperature increases, the particle size and yield of tantalum powder obtained by MR and EMR method is increased.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.240-247
• /
• 1998

Leakage vortices formed near blade tip causes an increase of total pressure loss near casing endwall region and as a result, the efficiency of rotor decreases. The reduction of rotor efficiency is related to the size of tip clearance. In this study, the three-dimensional flowfields in an axial flow rotor were calculated with varying tip clearance under various flow rates, and the numerical results were compared with experimental ones. The effects of tip clearance and attack angle on the leakage vortex and overall performance, and the less distributions were investigated through numerical calculations. In this study, tip leakage flow rate and total pressure loss by tip clearance were evaluated using numerical results and aprroximate equations were presented to evaluate the reduction of rotor efficiency by tip leakage flow.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.43-47
• /
• 2013

The extraction of metallic pure vanadium powder from raw oxide has been tried by Mg-reduction. In first stage, $V_2O_5$ powders as initial raw material was reduced by hydrogen gas into $V_2O_3$ phase. $V_2O_3$ powder was reduced in next stage by magnesium gas at 1,073K for 24 hours. After reduction reaction, the MgO component mixed with reduced vanadium powder were dissolved and removed fully in 10% HCl solution for 5 hours at room temperature. The oxygen content and particle size of finally produced vanadium powders were 0.84 wt% and 1 ${\mu}m$, respectively