• 한국재료학회지
• /
• 제12권11호
• /
• pp.850-855
• /
• 2002

Silica powders were prepared from $SiCl_4$-$H_2$O system by chemical vapor deposition process, and investigated on size control of the products with reaction conditions. The products were amorphous and nearly spherical particles with 130nm~50nm in size. The size distribution became narrow with the increase of [$H_2$O]/[SiCl$_4$] concentration ratio. The particle size decreased with the increase of reaction temperature, [$H_2$O]/[SiCl$_4$] concentration ratio and total flow rate. The specific surface area measured by BET method was about three times larger than that of electron microscope method.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.89-95
• /
• 1997

Welding technique is widely applied to general industry such as pressure vessel for chemical plant, pipe system, heavy industry, and automobile. There are some points which must be considered when robot system is used in welding automation process for productivity improvement. Welding quality is governed by heat input, and this quantity can be different according to shape, property, and thick of material . For desired heat input , weld input parameters such as welding voltage, current, and welding velocity must be determined with those consideration. Until now these parameters have been determined mainly by experience of operator. In this study, the size of welding zone was predicted by fuzzy rules were constructed from the relation between welding variables and weld pool size. Inverse model method which welding control input for welder is determined with optimum voltage and current by fuzzy controller is validatied by computer simulation.

• 한국분말재료학회지
• /
• 제20권5호
• /
• pp.371-375
• /
• 2013

ZnO nanoparticles in the size range from 5 to 15 nm were prepared by zinc-lithium-acetate system. The morphologies and structures of ZnO were characterized by TEM, XRD and FT-IR spectra. UV-visible results shows that the absorption of ZnO nanoparticles is blue shifted with decrease in particles size. Furthermore, photoluminescence spectra of the ZnO nanoparticles were also investigated. The ZnO nanoparticles have strong visible-emission intensity and their intensities depend upon size of ZnO nanoparticles.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2401-2404
• /
• 2007

Particle size of silicones can be controlled by changing the reaction conditions such as temperature and concentrations of water and tetramethoxysilane (TMOS). Alternatively, the use of ultrasound radiation is also an elegant technique to decrease the particle size. Small silicone particles can be obtained at low temperature from diluted reagent containing TMOS, especially under the powerful ultrasound radiation. The size control may be explained by the rate of particle growth rather than that of nucleation.

• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1320-1326
• /
• 1999

Since it is not possible to generate spatially uniform particle distribution at low pressures in which in-situ particle monitors(ISPMs) are normally operated, it is of interest to investigate the response of an ISPM to particle beams at low pressures. The purpose of this study is to develop technique that can control the size of particle beams. In this study, particle beams were generated at low pressures by using identical aerodynamic lenses, and their shape and size were visualized by collecting uniform sized methylene blue aerosol particles on a filter media. It was found that the size of particle beams depends on the number of lens, the distance between lenses, and the downstream distance from the final lens. The size of particle beams decreases with increasing distance between lenses, and increases with increasing downstream distance from the final lens. The experimental results obtained in this work will be used to investigate performance of an ISPM at low pressures.

• Journal of Mechanical Science and Technology
• /
• 제18권2호
• /
• pp.253-261
• /
• 2004

A simple and effective filtering method to control the member size of an optimized structure is proposed for topology optimization. In the present approach, the original objective sensitivities are replaced with their relative values evaluated within a filtering area. By adjusting the size of the filtering area, the member size of an optimized structure or the level of its topological complexity can be controlled even within a given finite element mesh. In contrast to the checkerboard-free filter, the present filter focuses on high-frequency components of the sensitivities. Since the present filtering method does not add a penalty term to the objective function nor require additional constraints, it is not only efficient but also simple to implement. Mean compliance minimization and eigenfrequency maximization problems are considered to verify the effectiveness of the present approach.

• 전자공학회논문지C
• /
• 제36C권1호
• /
• pp.66-72
• /
• 1999

본 논문은 개체군 변환 알고리즘의 새로운 수명할당방식(allocation method)을 제안한다. 이 방법으로 개체군의 크기를 적합도(fitness)에 따라서 조절할 수 있다. 개체군(population)의 크기는 최적해(optimal value) 근처로 갈수록 안정된 상태로 가게 된다. 유전자 코딩에 있어서는 이배체(diploidy) 방식을 사용하였다. 시뮬레이션을 통하여 새로운 수명 할당 방식이 개체군의 크기를 조절할 수 있음을 확인한다.

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.52-58
• /
• 2015

In this paper, The ET-MBEF algorithm is presented for CCD imaging seeker. At the imaging seeker, target size information is important factor for accurate tracking. The MBEF algorithm was proposed to estimate target size at IIR seeker. However, the MBEF algorithm can't be applied at CCD imaginary target size estimation. In order to overcome the problem, we propose ET-MBEF algorithm which based on ET (Edge Template) and MBEF algorithm. The performance of proposed method is tested at target intercept scenario. The experiment results show that the proposed algorithm has the accurate target intercept performance.

• Journal of applied mathematics & informatics
• /
• 제7권3호
• /
• pp.861-873
• /
• 2000

Rate-based flow control plays an important role for efficient traffic management of Available Bit Rate(ABR) services. We deal with the problem of the buffer dimension for rate-based ABR control. In this paper, we analyze the Allowed Cell Rate(ACR) of a source and the queue size in a steady state. First, we investigate the effect of the number of active sources on the behavior of the ACR and the maximum queue size. Reflecting the effect of this real scenes, we determine the optimal buffer size and buffer threshold. Furthermore, our analytic results are compared with the case when the effect of the number of active sources is disregarded.

• Journal of Electrical Engineering and information Science
• /
• 제2권6호
• /
• pp.138-145
• /
• 1997

This paper proposes an adaptive algorithm for the quantization step size control of MPEG-2, using the information obtained from the previously encoded picture. Before quantizing the DCT coefficients, the properties of reconstruction error of each macro block (MB) is predicted from the previous frame. For the prediction of the error of current MB, a block with the size of MB in the previous frame are chosen by use of the motion vector. Since the original and reconstructed images of the previous frame are available in the encoder, we can calculate the reconstruction error of this block. This error is considered as the expected error of the current MB if it is quantized with the same step size and bit rate. Comparing the error of the MB with the average of overall MBs, if it is larger than the average, small step size is given for this MB, and vice versa. As a result, the error distribution of the MB is more concentrated to the average, giving low variance and improved image quality. Especially for the low bit application, the proposed algorithm gives much smaller error variance and higher PSNR compared to TM5 (test model 5).