• Journal of the Korean Institute of Navigation
• /
• v.7 no.2
• /
• pp.65-113
• /
• 1983

A lot of studies of ship's economy are on the traditional fields such asreducing propulsion resistance, raising cargo handling rates and lessening building consts, but there are few researches on the merchant ship's economy concerning their deadweights and speeds according to shipping companies managerial cercumstances. Contrary to the contemporary trend that "the bigger, the better, if the cargo handling rate could increased sufficiently to hold down port time to that rate of smmaler vessels", this paper demonstrates the existence of certain limits in ship's size and speed according to the coditions of the freight rates, voyage distances, cargo handing rates, prices of fuel oil, interst rates etc. Fom the curves of criteria contour for various ship's deadweights and speeds which are depicted from the gird search method, one can get the costs and the yearly profit rates under the conditiions of large volume with long term contracts for the transportation of bulk cargoes. In estimating ship's transportation economy, the auther takes the position that the profit rate method is properer than the cost method, and introduces the calculation table of the voyage profit rate index. The use of the criteria contours will be of help to ship owners in determining the size and speed of the ship which will be built or purchased and serve in a certain trade route.

• Clinical Nutrition Research
• /
• v.5 no.3
• /
• pp.172-179
• /
• 2016

Acid food indicators can be used as pH indicators for evaluating the quality and freshness of fermented products during the full course of distribution. Iron oxide particles are hardly suspended in water, but partially or completely agglomerated. The agglomeration degree of the iron oxide particles depends on the pH. The pH-dependent particle agglomeration or dispersion can be useful for monitoring the acidity of food. The zeta potential of iron oxide showed a decreasing trend as the pH increased from 2 to 8, while the point of zero charge (PZC) was observed around at pH 6.0-7.0. These results suggested that the size of the iron oxide particles was affected by the change in pH levels. As a result, the particle sizes of iron oxide were smaller at lower pH than at neutral pH. In addition, agglomeration of the iron oxide particles increased as the pH increased from 2 to 7. In the time-dependent aggregation test, the average particle size was 730.4 nm and 1,340.3 nm at pH 2 and 7, respectively. These properties of iron oxide particles can be used to develop an ideal acid indicator for food pH and to monitor food quality, besides a colorant or nutrient for nutrition enhancement and sensory promotion in food industry.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.513-522
• /
• 2019

Catalysts based on organic compounds, transition metal and metal-organic frameworks (MOFs) have been applied to degrade or remove organophosphorus toxic compounds (OPs). During the last 20 years, various MOFs were designed and synthesized to suit application purposes. MOFs with $Zr_6$ based metal node and organic linker were widely used as catalysts due to their tunability for the pore size, porosity, surface area, Lewis acidic sites, and thermal stability. In this review, effect on catalytic efficiency between MOFs properties according to the structure, stability, particle size, number of connected-ligand, organic functional group, and so on will be discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.40-47
• /
• 2000

The cavitation noise of a hydrofoil is measured in a cavitation tunnel. It is exhibited that the noise level sharply increases with the inception of cavitation and increase with the decrease of the cavitation number until a moderate cavitation number. Below the cavitation number, the trend is reversed, which may be resulted from the interference effect between cavities. The trajectory of bubble is predicted by using the Lagrangian method. Meanwhile the size of the bubble is predicted based on the Kirkwood-Bethe approximation. The predicted results for the bubble size are compared with the experimental results. It is shown that the numerical method predicts the time history of cavities fairly well.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.113-122
• /
• 2019

In this study, I analyzed the measurement data of the early 20s male who are emphasizing the importance of good clothes in the fashion of body-contact clothes. Through this, I tried to provide basic data necessary for making clothing for early 20s male. Using data from Size Korea's 7th Human Body Survey, 588 people aged 20-25 years were analyzed and classified into four types. Type 1 have a thick and short body, narrow ankle and calf, thin legs. And the hip is not sagged, and height is a little short. So I named it 'short & thick body with bird legs'. Type 2 have a broad shoulder, slim and long body, and no sagging shoulders. So I named it 'slim inverted triangular figure'. Type 3 have a small height, thin and short body, and a thick ankle and calf. So I named it 'short & thin body with thick legs'. Type 4 have a tall height, narrow shoulder, and sagging hip and shoulders. So I named it 'Long triangle'. In order to improve fit of body-contact clothes reflecting the trend of men's wear in recent years, it is necessary to develop clothing prototypes by body type. 20s have the most ideal body shape after completion of growth, but differences in the length, thickness, and thickness of the trunk. This is reflected in the apparel pattern system, and it can be expected to increase consumers' satisfaction if they are used to make excellent ready-to-wear patterns.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.77-83
• /
• 2020

A uniflow cyclone has simple structure with a single channel in one direction. The one directional particle removal enables the uniflow cyclone to have compact size and low pressure drop. However, it has low collection efficiency compared to conventional cyclones. In this study, the effect of primary geometry on the performance of a uniflow cyclone with swirl vane is numerically investigated for the design of high performance uniflow cyclone. It is found that as the vortex finder diameter is increased, the pressure drop and the collection efficiency are decreased. Also, the same trend is predicted when the vortex finder height is increased. The best collection efficiency is predicted to be obtained when the vortex finder height is equal to the diameter of a cyclone. Reducing the body height by half will increase the pressure drop by 41%. When the body height is decreased, the collection efficiency is first increased and then decreased. The best collection efficiency is obtained when the body height is 4~5 times the cyclone diameter. Overall, the particle collection efficiency is highest when the Dν/D is equal to 0.3. But, the pressure drop is as high as 1592 Pa. Considering both collection efficiency and pressure drop, the best design is when Dν/D, Hν/D, and Hb/D are equal to 0.5, 1, and 5, respectively.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.181-195
• /
• 2014

The game Industry has been a major leader in business world with its size and volume in terms of profit and culture contents, and ever increasing at the moment. Cloud Game has appeared as a new, combined game format, playable on smart TV and smart phone with its upgraded storage size and fast spreading N-screen. This research studies the present reality of the cloud industry by focusing on three categories which are device type, Platform, and game contents consequently in order to determine the future prospect of cloud games. First, the cloud game business will thrive as devices such as smart TV and smart phone are used widely. Second, the cloud game industry will have a new era when OS systems of Platform are united effectively. Third, the previous platform holders will have to face new challenges brought up by cloud games' service providers. Forth, the gamer, developer, and service provider need each other in order to widen the spectrum of business in cloud game industry.

• Asia-Pacific Journal of Business
• /
• v.11 no.2
• /
• pp.207-233
• /
• 2020

Purpose - The purpose of this paper analyzes the relationship between the Corporate Social Responsibility(CSR) and Corporate Value to estimate whether the characteristics of Firm can change this relationship. Design/methodology/approach - This paper utilizes the total 776 firms' data over the period 2014-2018, and develops a new ESG index which was estimated by PCA. Findings - First, the estimated ESG index implies that Large company has the highest value of CSR, while Medium sized and Small company have the relatively low one. And comparing to the case of 2014, the trend of ESG index in Large company does not decrease in 2018. Second, there is a clear and significant non linear relationship between CSR and corporate value, it implies that the U-shaped exists in the Korean Firms. Such a tendency is mush stronger in the Large company. Third, the new ESG index indicates that it takes more time to increase Firm value in the Medium sized and Small company while there is a high possibility of increasing value in Large company from the little gab between the threshold points and mean value of ESG. Research implications or Originality - The non linear tendency between the Corporate Social Responsibility and Corporate Value is strongly affected by Firm size and the relative high quintile of ESG, but it is less affected by Firm history.

• Journal of Acupuncture Research
• /
• v.40 no.1
• /
• pp.1-15
• /
• 2023

Between May 2014 and April 2022, a total of 926 articles were retrieved from the international database, and a total of 233 articles were retrieved from the Korean database. From there, 14 studies were selected, and evaluated by the published year, terminology of the acupotomy, sample size, disease type, retention time, treatment sites, insertion depth and size of the acupotomy, treatment frequency, and duration, type of acupotomy manipulation method, evaluation index, therapeutic effects, adverse effects, and assessment of the risk of bias in randomized controlled trials. This study examined the need for additional acupotomy studies to secure an objective basis for the application of clinical treatment. Furthermore, the detailed description of the study methods and results and unified terminology can provide evidence for the efficacy of acupotomy.

• The Journal of Information Systems
• /
• v.32 no.2
• /
• pp.87-108
• /
• 2023

Purpose The main purpose of this study is to improve fake news detection performance by using video information to overcome the limitations of extant text- and image-oriented studies that do not reflect the latest news consumption trend. Design/methodology/approach This study collected video clips and related information including news scripts, speakers' facial expression, and video metadata from YouTube to develop fake news detection model. Based on the collected data, seven combinations of related information (i.e. scripts, video metadata, facial expression, scripts and video metadata, scripts and facial expression, and scripts, video metadata, and facial expression) were used as an input for taining and evaluation. The input data was analyzed using six models such as support vector machine and deep neural network. The area under the curve(AUC) was used to evaluate the performance of classification model. Findings The results showed that the ACU and accuracy values of three features combination (scripts, video metadata, and facial expression) were the highest in logistic regression, naïve bayes, and deep neural network models. This result implied that the fake news detection could be improved by using video information(video metadata and facial expression). Sample size of this study was relatively small. The generalizablity of the results would be enhanced with a larger sample size.