• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.5
• /
• pp.516-524
• /
• 1987

This paper presents experimental data of fluctuation characteristics of local void fraction of air-water two-phase flow which are associated with the flow pattern, annular gap size and radial location in vertical concentric annuli with coefficient of skewness and kurtosis. The annular gap widths are 13mm, 11mm, and 9mm for a 38m inner diameter as the lucite outer tube. A electrical conductivity probe was used to measure the local void fraction and traversed diametrically from inner wall to outer wall using radial increments of 2mm. It was shown that distribution of the coefficient of skewness and kurtosis, which is related that the one is the asymmetry and the other peakness of local void fraction distribution was influenced by flow pattern, annular gap size and radial location.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.1 no.2
• /
• pp.73-81
• /
• 1996

The construction of the health care facilities in terms of medical institutional source cost much and affect on management of another sources like, staffs for the health care delivery systems and the medical service For it is hard to amend and change the physical component of the facilities, the reasonability and the efficiency of the facilities should be the major considering point. Consequently, the purpose of this study is to represent the basic data for determining the size of general hospital by analyzing the use pattern of existing facilities and investigating annual use pattern and user's distance from the facilities.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.619-628
• /
• 2015

In this paper, we consider a method for estimating a stripe-type defect and the reconstruction of a defect-free L/S type mask used in lithography. Comparing diffraction patterns of defected and defect-free masks, we derive equations for the estimation of the location and size of the defect. We construct an analytical model for this problem and derive closed form equations to determine the location and size using phase retrieval problem solving techniques. Consequently, we develop an algorithm that determines a defect-free mask pattern. An example shows the validity of the equations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.547-550
• /
• 2003

In this paper we report the optimization method of the pattern size of the electrodes in PVA LCD for the transflective mode in order to improve the optical characteristics. Moreover, we designed the electrode of PVA LCD so as to remove the driving voltage difference between transmissive mode and reflective mode. As a result, we expect very simple manufacturing process and high optical performance even if complex process such as a multi cell gap process and multi driving method are not applied

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1013-1019
• /
• 1987

This paper proposes the four directional line segmentation method to transform the size of dot patterns such as character dot patterns, line drawings and so on, while maintaining the quality of original pattern. At the first, this method extracts three kinds of line segmentm, namely horizontal, vertical line and slant line, and then transforms dot patterns using the each rules which are appricable to each kind of extracted line segments. Our experimental results show that transformation of dot patterns can be succeed in good quality without implementing some kinds of smoothing processes, covering the continuous transforming ratio of 0.5 to N times.

• The Research Journal of the Costume Culture
• /
• v.5 no.2
• /
• pp.253-267
• /
• 1997

In this study, the comfortable as well as good-looking overall patterns were investigated. For proposing the proper ease of the overall, 9 types of experimental overall, that had the ease of different size and position, were made. The appearance of experimental overall No. 5, that had total 10.5㎝ ease in the back, was better than the others. The position of ease affected the appearance of overall. Experimental overall No. 9, that had total 12.5㎝ ease in the back, was better than any others in comfort. The position of ease was not important in comfort. From these results, it was proposed that the proper ease size increased the both comfort and appearance. The paper ease sizes, to gain the comfort and good-looking overalls pattern, were 3.5㎝ in the center-back waist and 2㎝ in the end of crotch to the outside.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1193-1202
• /
• 1996

This study investigates and analyzes the amount and shape of the front waist dart of the bodice and investigates the dart division method by bust size. Measurements at 5 arm positions were taken from 15 subjects. Clothing tests were given to 6 of the subjects. The conclusions were as follows: 1) Front Body surface changes were occurred around armpit and they were caused by the wrinkles of the armpit 2) The curved dart line was more appropriate for use with C cup, the large bust body, than the linear line. The changes of the dart amount at arm movements had different types by bust size. 3) Patterns for A & C cup body were adequate to divide the dart amount by 3 darts such as under the B.P., under the anterior armpit and side line, or to aggregate to 1 dart under the B.P. For the B cup body, however, the suitable pattern to use was the total dart amount divided by 1~2 darts and decreasing the waist line at the side line should be avoided.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.1
• /
• pp.45-50
• /
• 2001

With increasing complexity of digital logic circuits, fast and accurate verification of functional behaviour becomes most critical bottleneck in meeting time-to-market requirement. This paper presents several techniques for accelerating a cycle-based logic simulation. The acceleration techniques include parallel pattern logic evaluation, circuit size reduction, and the partition of feedback loops in sequential circuits. Among all, the circuit size reduction plays a critical role in maximizing logic simulation speedup by reducing 50% of entire circuit nodes on the average. These techniques are incorporated into a levelized table-driven logic simulation system rather than a compiled-code simulation algorithm. Finally, experimental results are given to demonstrate the effectiveness of the proposed acceleration techniques. Experimental results show more than 27 times performance improvement over single pattern levelized logic simulation.

• Journal of Korea Multimedia Society
• /
• v.8 no.11
• /
• pp.1556-1564
• /
• 2005

Various optimization techniques are deployed in the compilation process of a source program for improving the program's execution speed and reducing the size of the source code. Of the optimization pattern matching techniques, the string pattern matching technique involves finding an optimal pattern that corresponds to the intermediate code. However, it is deemed inefficient due to excessive time required for optimized pattern search. The tree matching pattern technique can result in many redundant comparisons for pattern determination, and there is also the disadvantage of high cost involved in constructing a code tree. The objective of this paper is to propose a table-driven code optimizer using the DFA(Deterministic Finite Automata) optimization table to overcome the shortcomings of existing optimization techniques. Unlike other techniques, this is an efficient method of implementing an optimizer that is constructed with the deterministic automata, which determines the final pattern, refuting the pattern selection cost and expediting the pattern search process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.368-370
• /
• 2007

AAO(Anodic Aluminum Oxidation) method has been known that it is practically useful for the fabrication of nano-structures and makes it possible to fabricate the highly ordered nano masters on large surface and even on the 2.5 or 3D surface at low cost comparing to the expensive e-beam lithography or the conventional silicon processing. In this study, by using the multi-step anodizing and etching processes, highly ordered nano patterned master with concave shapes was fabricated. By varying the processing parameters, such as initial matter and chemical conditions; electrical and thermal conditions; time scheduling; and so on, the size and the pitch of the nano pattern can be controlled. Consequently, various alumina/aluminum nano structures can be easily available in any size and shape by optimized anodic oxidation in various aqueous acids. The resulting good filled uniform nano molded structure through hot embossing molding process shows the validity of the fabricated nano pattern masters.