• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1069-1078
• /
• 2001

Pattern grading is a technique used to increase or decrease the size of a garment pattern according to the measurements in a given size chart. The original pattern is graded and laid out for cutting before mass production. This study tried to classify body types for pattern grading of jacket by applying a concept of "drop"defined as the difference between chest girth and waist girth and the difference between hip girth and waist girth for pants. Data were collected through the stratified sampling method. 138 subjects were selected out of 1,290 subjects of our sample population. Findings were as follows : 1) For pattern grading of jacket, the cell with the chest girth of 96cm and the waist girth of 87cm had the highest frequency rate and body type was 87H type and the coverage of this type was 9.52%. Then, the size specification 87-96 was the center of distribution. H type had seven ones such as 72H, 75H, 78H, 81H, 84H. 87H and 90H. H type had 33 observations and frequency ratio of 26.19%. Same types could be graded up and down from the reference size for the age group. And this reference size became to the starting point for developing the grading system. 2) For pattern grading of pants, fatty types, H10 type had six ones such as 80H10. 82H10, 84H10, 86H10, 88H10 and 90H10. H10 type had 28 observations and frequency ratio of 20.29%. H6 type had 6 ones such as 84H6, 86H6, 88H6, 90H6. 92H6 and 94H6. H6 type had 27 observations and frequency ratio of 19.57%. If lower body types were classified as same ones, these types could be graded up and down proportionately.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.863-877
• /
• 2008

The purpose of this study is to investigate the effect of dot pattern size(0.8, 1.8, 2.5, 5, 8), color combination (BG/R, Y/B), value tone(lt/dk, p/g), area-ratio on image information. Sets of stimulus and response scales(7 point semantic) were used as experimental materials. The stimuli were 20 color pictures manipulated with the combination of dot pattern size, color combination, value tone and area-ratio using computer simulation. The subjects were 240 female undergraduates living in Gyeongsangnam-do. Image factor of the stimulus was composed of 4 different components, visibility, chastity.feminity, cuteness and attractiveness. In the visibility, color combination, value tone, area-ratio, dot pattern size showed independent effect. In the chastity feminity, color combination, value tone, showed independent effect. In the cuteness, value tone, area-ratio, dot pattern size showed independent effect. Significant interaction effects of color and area-ratio combination on visibility and cuteness were found. Interaction efforts of color and value tone combination, value tone and area-ratio was significant on cuteness. For visibility image, BG/R combination of color and yellow background/blue dots were effective. For cuteness image, pale/grayish tone and background/dots area-ratio were effective.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.799-809
• /
• 2000

This study was designed for automated pattern drawing and grading a man's Durumagi, Korean traditional coat in order to reestablished and grade the pattern by Apparel CAD SYSTEM. For the study, AM-250 systems of Gerber as the computer and Macro program as the automated drawing were used. Also, PDS(Pattern Design System) was used for the grading of the original Durumagi pattern. Results were followings; First, the size data that could be standardized by reestablishing the pattern of a man's Durumagi by each size was presented. Second, The pattern was developed by each size. Third, new design was propose for mass production with the traditional design of the DURUMAGI Fourth, The time for making DURUMAGI pattern and the cost through the automated drawings by using the Macro program were reduced. Moreover, was presented the basic data for a ready to made garment like the Western garment. Five, A man's DURUMAGI by CAD System was graded that could be applied to ready to made Hanbok

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.117-127
• /
• 2019

Simultaneous pattern measurement system is new research subject for OLED panel inspection. It is defect inspection of OLED panel after deposition. This research suggests the system that calculates the size and center point of each patterns after obtaining standard and deposition pattern as one image. This system could be applied to OLED manufacturing process. The research result shows that the size and center point of each patterns could be obtained by displaying the standard pattern and deposition pattern in one image.

• The Research Journal of the Costume Culture
• /
• v.5 no.3
• /
• pp.176-183
• /
• 1997

To develop the bodice pattern of the master size of the established size chart which was suggested in the former studies, the wearing experiment was practiced. According to the result, developed pattern design in this study boys\` bodily characteristics were reflected fully. And especially, New pattern design method was suggested at chest circumference, neck circumference, arm circumference, chest breadth, and center front line. The study results were put into the database in order to apply apparel CAD system, and they could be easily used in standardization work of design pattern.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.157-164
• /
• 2023

The purpose of this study is to compare and analyze bust point information presented in literature and the 8th Korean Anthropometric Survey (Size Korea 2021) as a basis for pattern making for Korean adult women. Therefore, the the bust point position was analyzed through the length from the side neckline to the bust point and the horizontal length from the bust point to the chest. The results are as follows. First, Size Korea's population shows an increase in bust circumference and Side Neck Point to Bust Point with age, with the largest Bust-Point Breadth in the 30s, followed by the 20s, 40s, 60s, and 50s. Second, the Bust-Point Breadth in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created from the bust circumference measurements of Size Korea's population, was wider than the measurements, and the difference was verified as a highly significant. Third, in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee created with the bust circumference dimensions of Size Korea's population, the length of Neck Point to Bust Point was shorter than the measured value, and the difference was highly significant. Fourth, the Bust-Point Breadth and Neck Point to Bust Point in the female Basic Bodice pattern of Kang Soon-hee, and Oh Sun-hee, which were created with the bust circumference of the population of Size Korea by age, were analyzed in different age groups and showed significant differences from the measurements of Size Korea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.1
• /
• pp.48-59
• /
• 2003

The purposes of this research lie in developing dress shirts pattern targeting adult males between 25-34 years of age and presenting the rules of grading according to the real circumstances of dress shirts industry. The findings of this research are as follows: 1. The surveyed companies kept different size systems ranged from 5 to 18. They kept different size systems each other, and the pattern making was conducted by modification of the collar size, chest size, etc of the pattern developed through each company's know-how. All the surveyed companies were using point method of grading. 2. The method of the research pattern was to adopt N/6+1(cm) for the width of the back of the neck. N/6 for the front neck, N/6+2 for the depth of the front neck, B/6+7 for the shoulder width, B/6+5.5 for the breast width, B/4+5 for the whole width (back), B/4+4 for the whole width (front), B/4+3.5 for the depth, AH/2+0.5 for the back arm hole, AH2+1 for the front arm hole. 3. The grading rule was made after classifying the sizes into 14 centered on the standard size 40. Through the wearing test of research grading rule, 1 found the suitability of grading size 36 and 43 satisfiable.

• Human Ecology Research
• /
• v.58 no.2
• /
• pp.215-228
• /
• 2020

Underlying dress forms for high coverage patterns are very important in the dress industry. Size 9 from brand D was chosen according to the analysis that it was the best option because a dress should have a large allowable range in one size. The criteria for selection were the dress form with a waist circumference of 63.50 centimeters, which is close to the standard size of women in Korea. Brassieres for dresses were included to enhance the aesthetic value of the correction process in producing a basic dress pattern. An experimental torso pattern was applied to evaluate the fit and suitability of the dress form that was also later verified in the process of the dress works. Three dresses were produced and presented on the chosen study dress form. The research procedures are as follows. First, the sell-through rates and feedbacks were collected from the dress form vendor. Second, a literature survey on dresses and a dress company investigation were conducted. Third, the amount of body dimension changes due to the use of a bra in the dresses were examined. Fourth, after the correction of the dress form, the torso pattern was made by draping. Fifth, the torso experimental clothing made of muslin material was evaluated. Sixth, the dress works of the top design were presented using the size 9 basic pattern developed by brand D.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.523-527
• /
• 2011

Polycarbonate (PC) polymer is an engineering plastic which has large tensile strength and impact resistance and is wildly used as functional parts like micro mold. Direct machining of PC materials produces lots of burrs and rough surface due to large ductility and weak heat resistance and hence it is very difficult to machine PC materials using cutting tool to make micro-parts. In this study, elliptical vibration cutting (EVC) or 2-dimensional vibration cutting was performed to minimize the size of micro V-grooves on PC material. From the experimental results, it was observed that as the cutting depth and pattern size become smaller, the better machining quality was obtained, which is attributed to the positive effect of EVC that is dependent on the ratio of vibration amplitude to cutting depth. As the height of V-groove becomes less than $1.8{\mu}m$, however, the machining quality becomes lower as the pattern size decreases.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1537-1541
• /
• 2007

We injection molded a wedge type of plate with micro prizm patterns on its surface and investigated the fidelity of replication of the micro pattern depending on the process parameter such as mold temperature, melt temperature, injection rate or packing pressure. The size of the size of the $90^{\circ}$ prizm pattern is $50{\mu}m$ and the size of the plate is about 300㎜${\times}$200㎜. The thicknesses are 2.6㎜. and 0.7mm at each edge of the wedge type of plate. The fidelity of the replication turned out quite different according to the process parameters and location of the patterns on the plate. We measured the cavity pressure and temperature in real-time during the molding to analyze the effect of the local melt pressure and temperature on the micro pattern replication.