• Animal cells and systems
• /
• v.14 no.3
• /
• pp.169-174
• /
• 2010

Cutlassfish (Trichiurus lepturus Linnaeus 1758) is a commercially important fish in Korea. In recent years, the catch of cutlassfish in the coastal waters of Korea has significantly declined. Its genetic characterization has been little studied. To assist conservation and management efforts, we isolated and characterized 10 microsatellite loci using an enrichment method based on magnetic/biotin capture of microsatellite sequences from a size-selected genomic library. To characterize each locus, 30 individuals from a natural T. lepturus population in the coastal waters of Jeju Island, Korea, were genotyped. All loci except two, KTh9B and KTh22A, were polymorphic, with an average of 14.3 alleles per locus (range, 10 22). The mean observed and expected heterozygosities were 0.80 (range, 0.50 0.97) a 0.82 (range, 0.68 0.95), respectively. A significant deviation from Hardy-Weinberg equilibrium was observed at three loci (KTh6B, KTh10, and KTh16). This high variability indicates that these microsatellites may be useful for high-resolution studies of population genetics.

• Korean Journal of Materials Research
• /
• v.31 no.9
• /
• pp.532-538
• /
• 2021

In this study, a spray dryer is used to make granules of Y₂O₃ and YF₃, and then Y₅O₄F₇ is synthesized following heat treatment of them under Ar gas atmosphere at 600 ℃. Single and binary monomer mixtures are compared and analyzed to optimize photocurable monomer system for DLP 3D printing. The mixture of HEA and TMPTA at 8:2 ratio exhibits the highest photocuring properties and low viscosity with shear thinning behavior. The optimized photocurable monomer and synthesized Y₅O₄F₇ are therefore mixed and applied to printing process at variable solid contents (60, 70, 80, & 85 wt.%) and light exposure times. Under optimal light exposure conditions (initial exposure time: 1.2 s, basic exposure time: 5 s), YOF composites at 60, 70 & 80 wt.% solid contents are successfully printed. As a result of measuring the size of the printed samples compared to the dimensions of the designed bar type specimen, the deviation is found to increase as the YOF solid content increases. This shows that it is necessary to maximize the photocuring activity of the monomer system and to optimize the exposure time when printing using a high-solids ceramic slurry.

• Archives of Craniofacial Surgery
• /
• v.22 no.5
• /
• pp.260-267
• /
• 2021

Background: Elastic ear cartilage is a good source of tissue for support or augmentation in plastic and reconstructive surgery. However, the amount of ear cartilage is limited and excessive use of cartilage can cause deformation of the auricular framework. This animal study investigated the potential of periosteal chondrogenesis in an ear cartilage defect model. Methods: Twelve New Zealand white rabbits were used in the present study. Four ear cartilage defects were created in both ears of each rabbit, between the central artery and marginal veins. The defects were covered with perichondrium (group 1), periosteum taken from the calvarium (group 2), or periosteum taken from the tibia (group 3). No coverage was performed in a control group (group 4). All animals were sacrificed 6 weeks later, and the ratio of neo-cartilage to defect size was measured. Results: Significant chondrogenesis occurred only in group 1 (cartilage regeneration ratio: mean±standard deviation, 0.97±0.60), whereas the cartilage regeneration ratio was substantially lower in group 2 (0.10±0.11), group 3 (0.08±0.09), and group 4 (0.08±0.14) (p= 0.004). Instead of chondrogenesis, osteogenesis was observed in the periosteal graft groups. No statistically significant differences were found in the amount of osteogenesis or chondrogenesis between groups 2 and 3. Group 4 showed fibrous tissue accumulation in the defect area. Conclusion: Periosteal grafts showed weak chondrogenic potential in an ear cartilage defect model of rabbits; instead, they exhibited osteogenesis, irrespective of their embryological origin.

• Clinical and Experimental Reproductive Medicine
• /
• v.48 no.4
• /
• pp.311-315
• /
• 2021

Objective: As clinicians and patients await consensus on intraovarian platelet-rich plasma (PRP) treatment, this project evaluated contemporary research trends in the literature. Methods: A PubMed/NLM search aggregated all ovarian PRP-related publications (n=54) to evaluate their scope, abstract utility, submission-to-publication interval, journal selected, article processing charge (APC), free reader access to full-text manuscripts, number and nationality of authors, and inclusion of international collaborators. The NIH Clinical Trials database was also audited. Results: Published output on intraovarian PRP has increased consistently since 2016, especially among investigators in Greece, Iran, USA, and Turkey. Between 2013 and 2021, 42 articles met the relevancy criteria, of which 40.5% reported clinical studies, small series, or case reports, 33% described experimental animal models, and 23.8% were opinion/review papers. Only two works included a placebo control group. The submission-to-publication interval (mean±standard deviation) was 130±96 days, there were 5.9±3.2 authors per project, and journals invoiced US $1,613±1,466 (range, $0-$3,860) for APCs. Conclusion: There was no correlation between APC and time to publish (Pearson's r=-0.01). Abstract content was inconsistent; sample size and patient age were often missing, yet free full-text "open access" was available for most publications (59.5%). The NIH Clinical Trials portal lists eight registered studies on "ovarian rejuvenation," of which two are actively recruiting patients, while four have been terminated or have an uncertain status. Two studies have concluded, with results from one posted to the NIH website. PRP and its derivatives for ovarian treatment show early promise, but require further investigation. Research is accelerating and should be encouraged, particularly placebo-controlled randomized clinical trials.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.79-83
• /
• 2021

In this study, hollow silica microspheres (HSM) of various sizes formed according to the concentration of surfactants using water glass as a precursor, which is advantageous for commercialization due to its lower unit cost compared to conventional silicon alkoxide (tetraethyl orthosilicate, TEOS) was synthesized. The physical properties of the silica hollow microspheres according to the concentration of surfactant were analyzed using Fourier transform infrared, contact angle measurement, Brunauer-Emmett-Teller and Barrett-Joyner-Halenda analyzers and field emission scanning electron microscopy. When porous water glass-based hollow silica spheres were prepared by adding a surfactant at an appropriate concentration, it was confirmed that excellent hollow silica spheres were formed with a specific surface area of 169 m²/g, an average particle size of 25.3 ㎛, and a standard deviation of 6.25.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.181-186
• /
• 2018

With progress in industrialization, facilities for generating, delivering, and receiving high levels of electric power are in great demand. The scale of electric power equipment is increasing in both size and complexity. This has contributed to the development of our modern, high-tech and information-based society. However, if the generation of electric power is suspended due to unexpected accidents at power facilities or power stations, a range of equipment the operations of which are dependent on electric power can be damaged, causing substantial socioeconomic losses in an industrial society. A great deal of time and money would be expended to repair damaged facilities at a power station, causing enormous economic loss. In order to detect the deterioration processes of power cables, and to prevent the destruction of power cables, the operation status of power cables should be monitored on a regular basis. We studied the method in order to improve accuracy and reliability for diagnosising the junction where accident occurs frequently. We present the method of data acquisition and statistical processing.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.5
• /
• pp.308-315
• /
• 2019

Objectives: Estimating influenza-associated mortality is important since seasonal influenza affects persons of all ages, causing severe illness or death. This study aimed to estimate influenza-associated mortality, considering both periodic changes and age-specific mortality by influenza subtypes. Methods: Using the Microdata Integrated Service from Statistics Korea, we collected weekly mortality data including cause of death. Laboratory surveillance data of respiratory viruses from 2009 to 2016 were obtained from the Korea Centers for Disease Control and Prevention. After adjusting for the annual age-specific population size, we used a negative binomial regression model by age group and influenza subtype. Results: Overall, 1 859 890 deaths were observed and the average rate of influenza virus positivity was 14.7% (standard deviation [SD], 5.8), with the following subtype distribution: A(H1N1), 5.0% (SD, 5.8); A(H3N2), 4.4% (SD, 3.4); and B, 5.3% (SD, 3.7). As a result, among individuals under 65 years old, 6774 (0.51%) all-cause deaths, 2521 (3.05%) respiratory or circulatory deaths, and 1048 (18.23%) influenza or pneumonia deaths were estimated. Among those 65 years of age or older, 30 414 (2.27%) all-cause deaths, 16 411 (3.42%) respiratory or circulatory deaths, and 4906 (6.87%) influenza or pneumonia deaths were estimated. Influenza A(H3N2) virus was the major contributor to influenza-associated all-cause and respiratory or circulatory deaths in both age groups. However, influenza A(H1N1) virus-associated influenza or pneumonia deaths were more common in those under 65 years old. Conclusions: Influenza-associated mortality was substantial during this period, especially in the elderly. By subtype, influenza A(H3N2) virus made the largest contribution to influenza-associated mortality.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.476-484
• /
• 2019

RFID yoking proof proves that a pair of tags is scanned at the same time. Since the tags scanned simultaneously by a single reader are adjacent to each other, the yoking proof is used in applications that need to check the physical proximity of tagged objects. Most of the yoking proof schemes require pre-knowledge on adjacent tags. If an error occurs in the process of collecting information about adjacent tags, all subsequent proofs will fail verification. However, there is no research that suggests specific methods for obtaining information about adjacent tags. In this study, I propose a tag proximity information acquisition scheme for a yoking proof. The proposed method consists of two steps: scanning area determination and scanning area verification. In the first step, the size and position of the area to scan tags is determined in consideration of position and transmission range of the tags. In the next step, whether tag scanning is performed within the scanning area or not is verified through reference tags of the fixed position. In analysis, I show that the determined scanning area assures acquisition of adjacent tag information and the scanning area verification detects deformation and deviation of the scanning area.

• Journal of Technologic Dentistry
• /
• v.41 no.3
• /
• pp.211-217
• /
• 2019

Purpose: The purpose of this study is to evaluate the repeated measurement stability of scans related to dentition type. Methods: A normal model and the crowding and diastema models are also duplicated using duplicating silicon. After that, a plaster model is made using a plaster-type plaster on the duplicate mold, and each model is scanned 5 times by using an extraoral scanner. The gingival part and molar part were deleted from the 3D STL file data obtained through scanning. Using the 3D stl file obtained in this way, data is nested between model groups. Thereafter, RMS values obtained were compared and evaluated. The normality test of the data was performed for the statistical application of repeated measurements with dentition type, and the normality was satisfied. Therefore, the one-way ANOVA test, which is a parametric statistical method, was applied, and post-tests were processed by the Scheffe method. Results: The average size of each RMS in the Normal, Diastema, and Crowding groups was Normal> Crowding> Diastema. However, the standard deviation was in the order of Crowding> Normal> Diastema. The average value of each data is as follows. Diastema model was the smallest ($5.51{\pm}0.55{\mu}m$), followed by the crowding model ($12.30{\pm}2.50{\mu}m$). The normal model showed the maximum error ($13.23{\pm}1.06{\mu}m$). Conclusion: There was a statistically significant difference in the repeatability of the scanning measurements according to the dentition type. Therefore, you should be more careful when scanning the normal intense or crowded dentition than scanning the interdental lining. However, this error value was within the range of applicable errors for all clinical cases.

• Journal of Korean Society of Forest Science
• /
• v.108 no.1
• /
• pp.59-66
• /
• 2019

This study was conducted to evaluate the effect of the synthetic forest road network by calculating the optimal road density and layout of the forest road network in order to construct the systematic road network in the forested area. For this, five comparative routes were additionally planed and compared through evaluation indicators. As a result, the optimum road density of the study site was estimated to be 18.4 m/ha, and the synthetic forest road network was the best in the four indicators such as average skidding distance, standard deviation of skidding distance, development index, and circuity factor. In addition, the synthetic forest road network was comparable to the main road network by about 4 %p in the timber volume available and potential area size for logging, but the construction cost of the road was about 20 %p lower. It showed a synthetic forest road network was better in terms of economy.