• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.204-210
• /
• 1995

The characteristics of the internal circuits and the load capacitance should be included to optimize the size of BiCMOS buffer. In order to get the optimum size and delay time of the BiCMOS buffer, new size plane is suggested. By using the size plane, the optimum characteristics of CMOS buffer according to the number of stages can be obtained. From this method, delaytime, .tau.$_{D}$, is obtained 2.39 nsec with $V_{\var}$=5V, $C_{L}$=5pF, W=30.mu.m and $A_{e}$=135.mu. $m^{2}$.>..>...>.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.2963-2971
• /
• 2000

In order to obtain more realistic fracture resistance curve, research is currently underway to introduce new parameter and to quantify the constraint effect. The objective of this study is to investigate the relationship between the constraint effect of a size(plane size and thickness) and the fracture resistance curve. In this paper fracture toughness tests were performed with various plane size and various thickness of specimens in two materials. The test results showed that the effects of plane size in th4 J-R curve were significant and the curve was risen with an increase in plane size. However, relatively weak influence was observed form the change of the specimen thickness and size. The stress fields near the crack tip of th specimen is close to the HRR field according to increasing the plane size and Q stress appears different value according to material properties and the plane size.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.314.1-314.1
• /
• 2014

The properties of Ni/Au Ohmic contacts formed on nonpolar a-plane GaN grown on r-plane sapphire substrate with different tilt angles are investigated using current-voltage (I-V) measurements. To investigate the effects of pattern direction and size on Ohmic contact properties of a-plane GaN, transmission line method (TLM) patterns are formed either along c-axis and m-axis on nonpolar GaN surface with different size. I-V measurement results show that the size of TLM pattern and formation direction of electrode have an effect on the electrical properties of a-plane GaN. The large sized patterns show the relatively lower sheet resistance compared to the small sized patterns. In addition, the sheet resistance of a-plane GaN along m-axis shows lower values than that along the c-axis. Finally, the effects of miscut angle of r-sapphire substrate ($0.2^{\circ}$, 0.4oand $0.6^{\circ}$) on electrical properties of a-plane GaN will be discussed.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.202-207
• /
• 2004

An elastic-plastic finite element analysis of fatigue crack closure is performed for plane strain conditions. The stabilization behavior of crack opening level and the effect of mesh size on the crack opening stress are investigated. In order to obtain a stabilized crack opening level for plane strain conditions, the crack must be advanced through approximately four times the initial monotonic plastic zone. The crack opening load tends to increase with the decrease of mesh size. The mesh size nearly equal to the theoretical plane strain cyclic plastic zone size may provide reasonable numerical results comparable with experimental crack opening data. The crack opening behavior is influenced by the crack growth increment and discontinuous opening behavior is observed. A procedure to predict the most appropriate mesh size for different stress ratio is suggested. Crack opening loads predicted by the FE analysis based on the procedure suggested resulted in good agreement with experimental ones within the error of 5 %. Effect of the distance behind the crack tip on the crack opening load determined by the ASTM compliance offset method based on the load-displacement relation and by the rotational offset method based on the load-differential displacement relation is investigated. Optimal gage location and method to determine the crack opening load is suggested.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.365-370
• /
• 2000

In this dissertation, in order to analyze the ground plane size which will affect the antenna characteristic, the appropriate antenna was designed and produced in compliance with the needs that the existing antenna should be improved, and then the optimum ground plane size was calculated. It was proved it affected the radiation characteristic greatly but didn't affect the impedance characteristic nearly when ground plane size of the existing folded slot antenna was enlarged with using the copper e cut in some size. Though it require the complicate procedure by the strict design in order to calculate exactly, if it is made of the antenna of the appropriate size that the effect of ground plane can be taken no account, it can be made easily.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.987-992
• /
• 1997

Burrs always come out with the machining of ducterial with small size. Though the size of burrs is small, burrs dominate deterioration of the accuracy of the micro grooves. So the burr generation model especially side burr generation model was investigated to predict the size of the burrs at the given cutting conditions. The side shear plane is introduced to build the burr generation model and the width of side shear plane nomalized with cutting depth is defined with the shear angle. From the theoretical observation, the width of side shear plane can vary up 40% of the cutting depth. To determine the size of burr and stiffness, single groovings were carried out and it was found that there exist a critical depth of cut that the size or stiffness of the burr vary.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.4 s.247
• /
• pp.393-401
• /
• 2006

The influences of stress triaxiality on ductile fracture have been investigated for various specimens and structures. With respect to a transferability issue, recently, the interests on local approaches reflecting micromechanical specifics are increased again due to rapid progress of computational environments. In this paper, the applicability of the local approaches has been examined through a series of finite element analyses incorporating modified GTN and Rousselier models as well as fracture toughness tests. The ductile crack growth of nuclear carbon steels is assessed to verify the transferability among compact tension (CT) specimens with different in-plane size. At first, the basic material constants were calibrated for standard CT specimens and used to predict fracture resistance (J-R) curves of larger CT specimens. Then, the in-plane size effects were examined by comparing the numerically estimated J-R curves with the experimentally determined ones. The assessment results showed that the in-plane size effect should be considered for realistic engineering application and the damage models might be used as useful tool for ductile fracture evaluation.

• The korean journal of orthodontics
• /
• v.33 no.3 s.98
• /
• pp.157-167
• /
• 2003

The purpose of this study was to find whether there is a correlation between tooth size and jaw size. Dental stone models and cephalometric radiographic films of 87 untreated individuals were evaluated. Repeated measurements of the maximum mesiodistal width of the teeth were taken by means of a digital vernier caliper. Linear measurements of jaw size were assessed by means of a digitizer and Visual C++ program. All measurements were taken separately according to the subject's gender. To determine the relationship between jaw and tooth size, the Pearson correlation was used. The results were as follows: 1. Male and female subjects showed a statistical difference in regard to tooth size and jaw size 2. In contrast to the results of the male subjects, there were no statistically significant correlations between maxillary size and maxillary teeth size in female subjects 3. In male subjects, the two maxillary sizes of PTM vert-ANS vert (FH plane) and PTM vert-A yen (palatal plane) were significantly correlated with themaxillary teeth size. Especially, the size of the upper central incisor showed significant correlation with all maxillary sizes. 4. In both male and female subjects, mandibular size B vert- Point J vert (mandibular plane) showed significant correlation with mandibular teeth size. As gleaned kom the results of this study, the relationship between jaw size and tooth size was fair or little in natural occurring good occlusion.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.9
• /
• pp.15-20
• /
• 1997

Waveguide bandpass filters using E-plane or H-plane discontinuities have been used in many satellite communication systems. Since the transmitter and receiver of such systems tend to be getting smaller, components such as bandpass filters must also be reduced in size. In this paper, in order to reduce the waveguide, itself, of which bandpass filters consist, double plane step waveguide discontinuities are considered. They are analyzed using the mode matching method and the genralized scattering parameter of the cascaded structure is calculated. The characteristics of the bandpass filter which is designed using the reduced size waveguide is optimized by OSA90$^{TM}$. The bandpass filter has a good characteristics and smaller size than those made of the E-plane or H-plane step discontinuities.s.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.3
• /
• pp.39-47
• /
• 2017

The Depth Picture can be Encoded by the Plane Coding Mode that is the Method for Coding Mode by Considering a Part of the Picture as the Plane. In this Paper, we Propose the Method of Determining the Variable-sized Block for Variable Block Coding in the Plane Coding Mode for the Depth Picture. The Depth Picture Can be Encoded in the Plane Coding Through Estimating the Plane Which is Close to Pixels in the Block Using Depth Information. The Variable-sized Block Coding in the Plane Coding can be Applied as Follows. It Calculates the Prediction Error between Predicted Depths by the Plane Estimation and the Measured Depths. If Prediction Error is Below the Threshold, the Block is Encoded by Current Size. Otherwise, it Divides the Block and Repeats Above. If the Block is Divided Below the Minimum Size, the Block is not Encoded by the Plane Coding Mode. The Result of the Simulation of the Proposed Method Shows that the Number of Encoded Block is Reduced to 19% as Compared with the Method Using the Fixed-sized Block in the Depth Picture Composed of one Plane.