Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Variation of the Fracture Resistance Curve with the Change of a Size in the CT Specimen

CT시험편의 크기 변화에 따른 파괴저항곡선의 변화

  • Published : 2000.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In order to obtain more realistic fracture resistance curve, research is currently underway to introduce new parameter and to quantify the constraint effect. The objective of this study is to investigate the relationship between the constraint effect of a size(plane size and thickness) and the fracture resistance curve. In this paper fracture toughness tests were performed with various plane size and various thickness of specimens in two materials. The test results showed that the effects of plane size in th4 J-R curve were significant and the curve was risen with an increase in plane size. However, relatively weak influence was observed form the change of the specimen thickness and size. The stress fields near the crack tip of th specimen is close to the HRR field according to increasing the plane size and Q stress appears different value according to material properties and the plane size.

Keywords

References

  1. Chao, Y. J., Lam, P.S. and Zhang, L., 1998, 'Effect of Constraint on Fracture controlled by Stress or Strain,' Theoretical and Applied Fracture Mechanics, Vol. 30, pp. 75-86 https://doi.org/10.1016/S0167-8442(98)00043-3
  2. 조연제, 장윤석, 석창성, 김영진, 1996, '동일두께의 CT 시편에서 구속효과가 파괴저항곡선에 미치는 영향,' 대한기계학회, 대한기계학회논문집(A), 제20권, 제2호, pp. 529-539
  3. 김수용, 김영진, 석창성, 1996, 'CT시편의 구속효과가 파괴저항곡선에 미치는 영향,' 대한기계학회, 96 춘계학숙대회 논문초록집(A), pp. 83-93
  4. Kirk, M. T. and Dodds, R. H., 1991, 'An Analytical and Experimental Comparison of J Values for Shallow Through and Part Through Surface Cracks,' Engineering Fracture Mechanics, Vol. 39, No. 3, pp. 535-551 https://doi.org/10.1016/0013-7944(91)90065-9
  5. Leevers, P. S. and Radon, J. C., 1982, 'Inherent Stress Biaxiality in Various Fracture Specimen Geometries,' International Journal of Fracture, Vol. 19, pp. 311-325 https://doi.org/10.1007/BF00012486
  6. Betegon, C. and Hancock, J. W., 1991, 'Two Parameter Characterization of Elastic-Plastic Crack-Tip Fields,' Journal of Applied Mechanics, Vol. 58, pp. 104-110
  7. O'Dowd, N. P. and Shih, C. F., 1992, 'Family of Crack-tip Fields Characterized by a Triaxiality Parameter,' Journal of Mechanics and Physis of Solids, Vol. 40, No. 5, pp. 939-963 https://doi.org/10.1016/0022-5096(92)90057-9
  8. Williams, M. L., 1958, 'On the Stress Distribution at the Base of Stationary Crack,' International Journal of Applied Mechanics, Vol. 24, pp. 111-114
  9. 1995, 'Standard Test Methods for Tension Testing of Metallie Materials,' Annual Book of ASTM Standards ASTM E8-95, pp. 56-76
  10. 1995, 'Standard Test Method for $J_{IC}$, a Measure of Fracture Toughness,' Annual Book of ASTM Standards ASTM E813-89, pp. 646-660
  11. 1995, 'Standard Test Method for Determining J-R Curves,' Annual Book of ASTM Standards ASTM E1152-95, pp. 763-773
  12. Seok C. S. and Kim, S. Y., 1999, 'A Study on the Characteristics of Fracture Resistance Curve of Ferritie Steels,' KSME International Journal, Vol. 13, No. 11, pp. 827-835
  13. Link, R. E. and Lander, J. D., 1991, 'Something New on Size and Constraint Effects for J-R Curves,' Mechanical Engineering Pulications, pp. 707-721
  14. Lai, M. O., and Ferguson, W. G., 1986, 'Effect of Specimen Thickness on Fracture Toughness,' Engineering Fracture Mechanics, Vol. 23, No. 4, pp. 649-659 https://doi.org/10.1016/0013-7944(86)90112-8
  15. John, M. H. and et al., 1970, 'The Influence of Crack Length and Thickness in Plane Strain Fracture Toughness Tests,' Review of Developments in Plane Strain Fracture Toughness Testing, ASTM STP 463, pp. 160-190