• Animal Systematics, Evolution and Diversity
• /
• v.26 no.1
• /
• pp.75-78
• /
• 2010

A new marine sponge Cinachyrella unjinensis n. sp. has been collected from Jejudo Island in 2009. This new species is similar to C. kuekenthali (Uliczka, 1929) in the shape and composition of the spicules except for style. However, it differs from the latter by size of anatriaenes, protriaenes and microxeas.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.605-610
• /
• 2010

In order to design a touch interface for the elderly, human performance of input tasks on the touch screen was investigated by the laboratory experiment. Input times and input errors were measured in the experimental conditions that were changed according to age, key size, interkey space and input tool(finger or stylus pen). In the most of all experimental conditions, the task performance of the elderly was lower than that of the young. However, there were significantly different performance patterns between both groups. As the difficulty of task was getting higher, the task performance of the elderly was sharply decreased; pressing small key button by finger sharply increased input time and error rate, compared to that of the young. Therefore, the square key size suitable to the elderly may be over $8.0{\times}8.0mm$. While the interkey space did not influence to the input task performance of the young, the task performance of the elderly was influenced. The elderly showed big difference of task performance according to input tool. However, the young were less influenced by input tool.

• Journal of Powder Materials
• /
• v.17 no.2
• /
• pp.130-135
• /
• 2010

Sm-16.7wt%Co alloy powders were prepared by high energy ball milling under the conditions of various milling time and the content of process control agent (PCA), and their microstructure and magnetic properties were investigated to establish optimum processing conditions. The initial powders employed showed irregular shape and had a size ranging from 5 to $110\;{\mu}m$. After milling for 5 h, the shape of powders changed to round shape and their mean powder size was approximately $5\;{\mu}m$, which consisted of the agglomerated nano-sized particles with 15 nm in diameter. The coercivity was reduced with increasing the milling time, whereas the saturation magnetization increased. As the content of PCA increased, the powder size minutely decreased to approximately $7\;{\mu}m$ at the PCA content of 10 wt%. The XRD patterns showed that the main diffraction peaks disappeared apparently after milling, indicating the formation of amorphous structure. The measured values of coercivity were almost unchanged with increasing the content of PCA.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.968-988
• /
• 2010

Anonymous hierarchical identity based encryption (HIBE) is an extension of identity based encryption (IBE) that can use an arbitrary string like an e-mail address for a public key, and it additionally provide the anonymity of identity in ciphertexts. Using the anonymous HIBE schemes, it is possible to construct anonymous communication systems and public key encryption with keyword search. This paper presents an anonymous HIBE scheme with constant size ciphertexts under prime order symmetric bilinear groups, and shows that it is secure under the selective security model. Previous anonymous HIBE schemes were constructed to have linear size ciphertexts, to use composite order bilinear groups, or to use asymmetric bilinear groups that is a special type of bilinear groups. Our construction is the first efficient anonymous HIBE scheme that has constant size ciphertexts and that uses prime order symmetric bilinear groups. Compared to the previous scheme of composite order bilinear groups, ours is ten times faster. To achieve our construction, we first devise a novel cancelable random blinding technique. The random blinding property of our technique provides the anonymity of our construction, and the cancellation property of our technique enables decryption.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.864-868
• /
• 2010

Among LTCC material for substrate, the crystallized anorthite system was mainly studied as high strength material. However, specific factors that have affected on strength of material were studied insufficiently on anorthite system. In this study, the composition of anorthite glass was Ca-Al-Si-Zn-O. The changes of phase and microstructure were observed with the amount and the particle size of glass and the sintering temperature. It was studied that the factors affected on the strength of material. Phases of anorthite and $ZnAl_2O_4$ were formed with the increase of sintering temperature. The $Al_2O_3$ phase was increased with $Al_2O_3$ amount, acted as filler, and the strength of material is increased with $Al_2O_3$ phase. But phases of anorthite and $ZnAl_2O_4$ didn't affect on the strength of material. In the case of 60 vol% glass amounts and below $3.2\;{\mu}m$ of glass particle size, the strength of material was decreased. It is thought that the decrease of strength was due to non-homogeneous mixing between glass powder and filler.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.4
• /
• pp.64-68
• /
• 2010

Recently, MBT(Mechanical Biological Treatment) facilities were built up and operated to separate and recycle MSW(Municipal Solid Wastes)in South Korea. However, the size distribution of MSW is very rough, and it is causing operation problem because MSW would be crushed in undersize diameter by mechanical equipment before feeding each seperation process. Also, the organic material should be pre-seperated to reuse recycle material in MSW. In this research, the reactor of 1ton/batch using the super-heated steam was tested to present the separation efficiency and the size distribution of MSW by experimental factors.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.237-245
• /
• 2012

Objective: The aim of the study is to analyze female adult's body shape characteristics and to provide the basic information for clothing manufacturing. Background: The comparative study among the age groups is very fundamental to understand the body characteristics of each subjects group. Therefore, comparison of body measurements in age groups was applied in this study. Method: The study was fulfilled by the comparison between the data of the $5^{th}$ Anthropometry of Size Korea (2004) and the $6^{th}$ Anthropometry of Size Korea(2010). The subjects were 2,213 female adults aged 20~59 of the 5th Size Korea anthropometric survey and 2,025 female adults aged 20~59 of the 6th Size Korea anthropometric survey. Results: The differences indicated the decreased values in widths, depths, girths regarding the torso region and BMI. "Head height to Stature ratio" decreased significantly in the 6th data, on the other hand, "Crotch height to Stature ratio" increased in the 6th data. Through the distribution characteristic of the age groups by Stature groups, it was convinced that 160cm stature group is the most frequent among all age groups of the 6th Size Korea. Conclusion: As a summary, the meaningful differences were showed between the 5th anthropometric data and the 6th data. According to the 6th Size Korea, the distribution tendency of obesity is very similar to the 5th Size Korea data. But the percentage of obese women declined significantly. Application: These findings from the study can be utilized women's wear design and construction that reflect body characteristics.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.817-825
• /
• 2020

Over the last few decades, corporate frauds have highlighted the significance of corporate governance in deriving firm performance. By using different sample data, extensive research has examined how corporate governance structure influences firm's profitability, but limited research was undertaken on the banking sector of Pakistan. This research adds to the literature by testing how board structure derives bank's performance by using sample data of 19 banks for the period from 2010 to 2017. In addition, the study analyzes the controlling part of size on the link between board governance and bank performance. Findings reveal that banks having small board size, fewer non-executive directors and minimum activity level perform better. Analysis related to bank size illustrates that board size has value in increasing benefits in large size banks in contrast to small size one, while higher participation by board members enhances performance of small size banks more. The correlation results and findings showed that there existed no multicollinearity issue between independent variables. Board size showed positive correlation with the market variable, while board activity tended to correlated negatively with the market performance. Inverse correlation between board size and independent directors indicated that Pakistani banks with greater board size had fewer independent directors.

• Journal of ILASS-Korea
• /
• v.15 no.4
• /
• pp.170-176
• /
• 2010

This paper describes the grid-size dependency of the conventional Eulerian-Lagrangian method to spray characteristics such as spray penetration and SMD in modeling DME sprays. In addition, the reduction of the grid-size dependency of the present Gas-jet model was investigated. The calculations were performed using the KIVA code and the calculated results were compared to those of experimental result. The results showed that the conventional Eulerian-Laglangian model predicts shorter spray penetration for large cell because of inaccurate calculation of momentum exchange between liquid and gas phase. However, it was shown that the gas-jet model reduced grid-size dependency to spray penetration by calculating relative velocity between liquid and ambient gas based on gas jet velocity.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.4
• /
• pp.299-311
• /
• 2014

Objective: The aim of this study was to develop a method for measuring breast size from three-dimensional (3D) body scan image data. Background: Previous bra studies established reference points by directly contacting the subject's naked skin to determine the boundary of the breast. But some subjects were uncomfortable with these types of measurements. This study examined noncontact methods of extracting breast reference points from 3D body scan data that were collected while subjects were wearing standardized soft bras. Method: 3D body scan data of 32 Korean women were analyzed. The subjects were selected from the Size Korea 2010 study. The breast landmarks were identified by graphic analyses of slicing contour lines on 3D body scan data. Results: Three methods determining bra cup size were compared. The M1 and M2 methods determined cup size by calculating the difference between bust girth and under-bust girth. The M3 method determined bra cup size by measuring breast arc length. Conclusion: The researchers proposed an anthropometric bra cup sizing system with the breast arc length (M3 method). It was measured from the geometrically defined landmarks on the 3D body scan slicing contour lines. The new bra cup size was highly correlated with breast depth. Application: The noncontact measuring method used in this study can be applied to the ergonomic studies measuring sensitive body parts.