• Archives of Reconstructive Microsurgery
• /
• v.25 no.1
• /
• pp.15-18
• /
• 2016

Any types of burn injury that involve more than deep dermis often require reconstructive treatment. In gluteal region, V-Y fasciocutaneous advancement flap is frequently used to cover the defect. However, in case of large burn wounds, this kind of flap cannot provide adequate coverage because of the lack of normal surrounding tissues. We suggest V-Y adipofascial flap using the surrounding superficially damaged tissue. We present the case of a patient who was referred for full-thickness burn on gluteal region. We performed serial debridement and applied vacuum-assisted closure device to defective area as wound preparation for coverage. When healthy granulation tissue grew adequately, we covered the defect with surrounding V-Y adipofascial flap and the raw surface of the flap was then covered with split-thickness skin graft. We think the use of subcutaneous fat as an adipofascial flap to cover the deeper defect adjacent to the flap is an excellent alternative especially in huge defect with uneven depth varying from subcutaneous fat to bone exposure in terms of minimal donor site morbidity and reliability of the flap. Even if the flap was not intact, it was reuse of the adjacent tissue of the injured area, so it is relatively safe and applicable.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.1
• /
• pp.27-33
• /
• 2002

The objective of this research is to develop a new module which can reuse XML data by modifying the property of satellite images through the client's GUI at remote site. In order to implement this functionality, we used DOM interface which increases the efficiency of accessing the document structure, and loaded the developed GUI that could resort, retrieve and manage the satellite image list as converted XML data. The system was applied to the management system of satellite images in the Research Institute of SFC at Keio University which results in the confirmation of the technical functionalities.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.323-329
• /
• 2018

The municipal solid waste (MSW) management system in one of the Class II Indian cities i.e. Rishikesh was studied and analysed to identify the key issues in solid waste management in the city. A total of 329 solid waste samples from 47 households were collected to characterize the household solid waste (HSW). The average (HSW) generation rate was 0.26 kg/c/d and it was composed of organic waste (57.3%), plastics (14%), paper (10.9%), and glass and ceramic (1.3%) and other materials (16.5%). There was an inverse relationship between household waste generation rate and family size (p < 0.05). The MSW management system practiced in Rishikesh is unsound. There is no waste segregation at source, no provisions of composting and no recycling by formal sector. The collection and transportation of waste is inadequate and inappropriate. Collected waste is dumped in open dumping site without scientific management. Following are some recommendations for developing a sustainable solid waste management system in Rishikesh city: (1) sensitize people for segregation at source; (2) promote reduction, reuse and recycling of wastes; (3) promote community based composting; (4) provision for 100% door to door collection and; (5) formalize the informal sectors such as rag pickers and recycling industries.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.383-397
• /
• 1999

For sites to be investigated, the results of such an investigation can be used in determining foals for cleanup, quantifying risks, determining acceptable and unacceptable risk, and developing cleanup plans t hat do not cause unnecessary delays in the redevelopment and reuse of the property. To do this, it is essential that an appropriately detailed study of the site be performed to identify the cause, nature, and extent of contamination and the possible threats to the environment or to any people living or working nearby through the analysis of samples of soil and soil gas, groundwater, surface water, and sediment. The migration pathways of contaminants also are examined during this phase. Key aspects of cost-effective site assessment to help standardize and accelerate the evaluation of contaminated soils at sites are to provide a simple step-by-step methodology for environmental science/engineering professionals to calculate risk-based, site-specific soil levels for contaminants in soil. Its use may significantly reduce the time it takes to complete soil investigations and cleanup actions at some sites, as well as improve the consistency of these actions across the nation. To achieve the effective site assessment, it requires the criteria for choosing the type of standard and setting the magnitude of the standard come from different sources, depending on many factors including the nature of the contamination. A general scheme for site-specific assessment consists of sequential Phase I, II, and III, which is defined by workplan and soil screening levels. Phase I are conducted to identify and confirm a site's recognized environmental conditions resulting from past actions. If a Phase 1 identifies potential hazardous substances, a Phase II is usually conducted to confirm the absence, or presence and extent, of contamination. Phase II involve the collection and analysis of samples. And Phase III is to remediate the contaminated soils determined by Phase I and Phase II. However, important factors in determining whether a assessment standard is site-specific and suitable are (1) the spatial extent of the sampling and the size of the sample area; (2) the number of samples taken: (3) the strategy of taking samples: and (4) the way the data are analyzed. Although selected methods are recommended, application of quantitative methods is directed by users having prior training or experience for the dynamic site investigation process.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.850-857
• /
• 2015

This study was aimed to identify the characteristics of nest and breeding site conditions of Chinese Egret (Egretta europhotes) that breed in the uninhabited islets of the western coast of South Korea. It is expected that the information collected through this study can contribute to providing basic information required when building and managing artificial nests in their natural breeding habitats. Chinese Egrets make their nests in the shrub layers of Long Leaf Elaeagnus (Elaeagnus macrophylla), Arrow Bamboo (Pseudosasa japonica), and Baby Brier (Rosa multiflora). A total of 50 breeding nests of Chinese Egret were investigated in June and July 2013, with area-wise distribution as follows: Seomando (11 nests), Hwangseodo (14 nests), Mokdo (10 nests), and Napdaekiseom (15 nests). Vegetation coverage (cover, %), height from the ground to the top (height, cm), thickness from top to bottom of the nest (thickness, cm), reuse period, major axis (cm), minor axis (cm), and depth (cm) of each nest were measured. According to the results of the study on the nest characteristics of 4 breeding groups, the nests in Hwangseodo had the highest coverage, the nests in Mokdo were built in the highest places, the nests in Napdaekiseom showed the longest reuse period, and the nests in Mokdo had the greatest depth. The differences in height and reuse period were significant between Mokdo and Napdaekiseom. Moreover, there were significant differences in reuse period and depth between Seomando and Hwangseodo. There were significant differences in cover, minor axis, and depth between breeding groups that built nests on Arrow Bamboo (Mokdo and Napdaekiseom) and Baby Brier (Seomando and Hwangseodo). Nest characteristics of Chinese Egret were generally similar, while some variables showed different values for different breeding groups.

• Journal of the Korean GEO-environmental Society
• /
• v.1 no.1
• /
• pp.79-85
• /
• 2000

The environmental assessment on the open dumping landfill of small scale which was situated in local small city was carried out to reuse the landfill site as the residental, commercial and other purposes through the analysis of the leachate of landfill, extracted solution from landfill waste. The waste was landfilled at 5.5~8m depth and the covered layer so poor as 20~50cm thickness. The biodegradable organic matters were almost degraded and the result of the leachate of landfill showed that the BOD/COD ratio were measured as 0.079, pH 7.2~7.6, SS 47736mg/L, COD 6193.8mg/L, T-N 596mg/L, and T-P 123.9mg/L respectively. These results were higher than those of extracted solution of landfill waste as the COD and BOD were measured as low values and T-N 7.77mg/L and T-P as 0.20mg/L lower concentrations the landfill appears the maturation phase. As the result of the assessment on the open dumping landfill of small scale, if appears that this landfill is maturation phase and the formation leachate is reduced. If the treatment facility of leachate from landfill and the layer which protects the inflow/infiltration is prepared, it can be safely used as this landfill site.

• Clean Technology
• /
• v.9 no.2
• /
• pp.87-100
• /
• 2003

The aim of study was to suggest a methodology for applying cleaner production technology in dyeing & finishing process of textile materials. To accomplish cleaner production, we performed consulting activity in dyeing factory, which composed of following different procedures. First, we organized consulting team with specialists for dyeing, energy and chemicals, and visited dyeing companies for the purpose of doing basic investigation such as analysis of process, chemicals & effluents, condition of equipment and process flow of products. Environmental aspect of raw materials (dyestuff, chemicals) was assessed by TOC, COD, BOD, and effluent of that was assessed by TOC, COD, BOD, TDS and pH. Second, We find out the problems in dyeing&finishing process from the view point of dyeing process, energy, raw materials and process management by utilizing MB (material balance), LCA(Life Cycle Assessment), EB(Energy Balance). Third, we generated the solutions to achieve optimal process condition by brain storming method, and then implemented the solutions to each process. Finally, we determined their effectiveness after considering the results of repeating trials for the solutions. Cleaner production could be achieved by keeping optimal process conditions, equipment modification, improved production management, and on-site reuse or recycling.

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.201-205
• /
• 2008

The korean government started to ban the sanitary landfill of food wastes as of 2005. The radical change of policy is primarily due to the limited landfill site, but aimed to promote not only to reduce the food waste production but also to enhance the reuse and recycle. The performance of elutriated acid fermentation to evaluate the effects of elutriating ratios was investigated. The fermenters were operated with elutriating water to food waste volumetric ratio of 2, 1, 0.5 and 0.25. Initial pH of elutriating water was set for 9 based on the pH effects study. The cumulative amounts of SCOD production rate were $0.34gSCOD/gVS_i$, $0.45gSCOD/gVS_i$, $0.26gSCOD/gVS_i$ and $0.28gSCOD/gVS_i$ with the ratios of 2, 1, 0.5 and 0.25, respectively. The cumulative productions of VFAs were 0.12 gVFAs as $COD/gVS_i$, 0.28 gVFAs as $COD/gVS_i$, 0.21 gVFAs as $COD/gVS_i$ and 0.14 gVFAs as $COD/gVS_i$ with the ratios of 2, 1, 0.5 and 0.25, respectively. The volume reduction were 58%, 52%, 45% and 47% with the ratios of 2, 1, 0.5 and 0.25, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.17 no.1
• /
• pp.115-120
• /
• 2008

Recently, there has been the gradual growth of the public in rural amenities, hobby farming works, much more urbanities, and especially near-retires. However, in spite of popular preference to ruralities, little has been known about their demand on retired rural life. Therefore, this study examined urbanites' attitude to preparatory works for out-migration, preferred residential site condition and life styles in the countryside. For the purpose, data were collected from the survey with the sample of 62 urban trainees who were studying farming technology in department of training on agricultural technology of Korea National Agricultural College, RDA. We carried out the experience farming to candidate with using the abandoned sericultural facilities which are the silkworm rearing house and mulberry fields. The 71% of urban trainees, who answered in this survey, hoped to move into countryside after retirement and to make a monthly income of $1,000 from agriculture. The age distribution of sericulural farmers is about 79% more than that of 60 years old. In the experience farming works. The two candidates made 1,977$ with net income through 32 days worked in spring season. In autumn season, the couple candidates made 1,317$ with net income through 23 days worked. Knowledge of these results will be important to policy-makers and to understand the role that retirement in-migration play in stimulating economic growth of rural agricultural farmers.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.195-200
• /
• 2017

Due to the rapid development of Internet technology, qualities of Web services are steadily improving and the Web database systems are actively employed to efficiently manage proper informations in various fields. In this paper, we propose a Web database system for the efficient material management for reusing construction materials. The proposed Web-based management system is operated using the spring framework, after constructing a database based on the collected data including tag ID, Location, Material, State, and Cycle, using the RFID(: Radion Frequency IDentification) system equipped with a location estimation module. Recently, the processing problem for a large amount of the residues generated at the demolition stage of various buildings is magnified in the construction site. The proposed Web-based construction material management system is expected for improving the processing problem as increasing the reusability and for reducing the construction cost as efficiently managing the construction materials for the reuse.