• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.3
• /
• pp.110-116
• /
• 1981

Soil surface charge which manipulates some important soil physico-chemical properties such as nutrient and water holding abilities, colloidal stability and soil erosion was investigated in wide range of soil pH, using soils developed originally from same volcanic ash deposit but under different rainfall condition in Hawaii. The results can be summarized as follows : 1. Ustollic Camorthid (Kawaihae soil) which was developed under the lowest rainfall (less than 500 mm/yr) revealed low Z.P.C. (4.5-5.0) and less dependence of net charge on concentration of indifferent electrolytes. 2. Typic Hydrandepts (Akaka and Hilo soils) which were developed under the high rainfall (3050-7600 mm/yr) showed the Z.P.C. in between 5.5-7.0 and high dependence of net charge on concentration of indifferent electroytes. 3. It was found by X-ray diffraction together with total chemical analysis that amorphous materials were dominant (above 6.0%) in Typic Hydrandepts while dehydrated halloy-site (1 : 1 clay minerals) was dominant (45-50%) in Ustollic Camorthid. 4. In spite of little difference in particle size distribution of the soils, the difference of specific surface area was remarkable showing the order of Akaka (289) > Hilo (268) > Kawaihae (93). 5. It was evident, taking account of apparent field pH values, 5.2 of Akaka, 5.5 of Hilo and 7.0 of Kawaihae soil, respectively, that Akaka, and Hilo soils would show either positive or near zero (+ or 0) of ${\Delta}pH$ while Kawaihae soil would exhibit negative (-) of ${\Delta}pH$ at natural field condition.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.3
• /
• pp.61-68
• /
• 2010

Phytoextraction, one type of phytoremediation processes, has been widely used in the removal of heavy metals from polluted soil. This paper reviewed literature on metal uptake by plants and characterized the metal uptake by types of metals (Zn, Cu, Pb, Cd, and As), plant species, initial metal concentrations in soil and the distribution of metals in different parts of plants. The potential of metal accumulation and transport by plants was closely related to plants species, types of metals, and initial metal concentrations in soil. The plants belonging to Brassicaceae, Solanaceae, Poaceae, and Convolvulaceae families have shown the high potential capacity of Cd accumulation. The Gentianaceae, Euphorbiaceae, and Polygonaceae families have exhibited relatively high Pb uptake potential while the Pteridaceae and Cyperaceae families have shown relatively high Zn uptake potential. The Pteridaceae family could uptake a remarkably high amount of As compared with other plant families. The potential metal accumulation per plant biomass has increased with increasing initial metal concentration in soil up to a certain level and then decreased for Cd and Zn. For As, only Pteris vittata had a linear relationship between initial concentration in soil and potential of metal uptake. However, a meaningful relationship for Pb was not found in this study. Generally, the plants having high metal uptake potential for Cd or Pb mainly accumulated the metal in their roots. However, the Euphorbiaceae family has accumulated more than 80% of Pb in shoot. Zn has evenly accumulated in roots and stems except for the plants belonging to the Polygonaceae and Rosaceae families which accumulated Zn in their leaves. The Pteridaceae family has accumulated a higher amount of As in leaves than roots. The types of metals, plant species, and initial metal concentration in soil influence the metal uptake by plants. It is important to select site-specific plant species for effective removal of metals in soil. Therefore, this study may provide useful and beneficial information on metal accumulation by plants for the in situ phytoremediation.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.4
• /
• pp.45-53
• /
• 2012

Ground drilling is a common method to conduct site investigation, soil improvement, and pile installation. In the point of construction ground drilling requires electrical energy to drill a hole in ground in which the energy exerts into the motor located on the head of auger and generates rotational power. In this paper it is verified that the exerted electrical energy is closely related to the strength characteristics of ground. Measurement sensors, recording system, and drilling system were developed to obtain exerted motor current and drilling depth and laboratory soil box tests were carried out. The measured motor current and boring depth were applied to predict SPT N-value and the prediction results were compared to SPT N-value of laboratory tests. The test results show that the exerted electrical energy to bore ground be a good index to estimate SPT N-value.

• The Plant Pathology Journal
• /
• v.25 no.1
• /
• pp.70-76
• /
• 2009

The rhizobacteria of Panax notoginseng were isolated from six sites in Yanshan, Maguan and Wenshan Counties, Yunnan Province of China, and their antagonistic activity against P. notoginseng root-rot fungal pathogens was determined. Of the 574 rhizobacteria isolated, 5.8% isolates were antagonistic in vitro to at least one of the five pathogens, Cylindrocarpon didynum, Fusarium solani, Phytophthora cactorum, Phoma herbarum, and Rhizoctonia solani. The number of rhizo bacteria and the number that inhibited fungi differed depending on sampling sites and isolation methods. Rhizobacteria isolated from the site in Yanshan and Maguan showed more antagonistic effect than them in Wenshan. Heat treatment of rhizosphere soil at $80^{\circ}C$ for 20 min scaled the antagonists up to 14.0%. Antagonistic bacteria in the roots proportioned 3.9% of the total isolates. The most antagonistic isolates 79-9 and 81-4 are Bacillus subtilis based on their 168 rDNA sequence and biochemical and physiological characteristics. Identification and evaluation of antagonistic bacteria against P. notoginseng root-rot pathogens in the main planting areas improved our understanding of their distribution in rhizosphere soil. Furthermore these results indicated that the interactions between biocontrol agent and soil microbes should be seriously considered for the successful survival and biocontrol efficacy of the agents in soil.

• The Korean Journal of Mycology
• /
• v.19 no.3
• /
• pp.203-213
• /
• 1991

From 1986 to 1990, the fifty-three sites (shiros) of the five places known as an areas of the pine-mushroom production in Kyoung Sang Do were visited, investigating the biology or ecology of pine-mushrooms. Physical or ecological characteristics of the areas producing pine-mush­rooms was similar to those reported in Japan, but not similar to in this regardings; The ages of pine trees, the understory plant flora of the places producing the pine-mushrooms and the soil types. The areas of pine-mushroom productions are divided to two typical areas, the inland and coastal areas. Ecological differences between two areas were found, The understory plant flora and different soil types. Three kinds of soil were, by the naked eyes, were found from our observa­tions of Kyoung Sang Do, but not based on soil analysis. The pine-mushrooms observed in Kyoung Sang Do were related to the root of the pine trees, but not confirmed to be ectomycorrhizally related to the pine trees. The mycelia isolated form the different places were compared with the degradation of phenolic compounds and culture methods, but were not clearly distinguished. The productions of pine-mushroom and several methods for the pine mushroom were suggested under four years' observations.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.

• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.267-272
• /
• 2007

Microorganisms capable of degrading poly(butylene succinate-co-butylene adipate) (PBSA) were isolated from 40 soil samples such as landfill site soil, cultivating soil and activated sludge soil from 20 different sites in Korea by using the enrichment culture and the clear zone test at $37^{\circ}C$. Based on the 16S rDNA sequences, the isolated bacterium was identified to be Streptomyces sp. PBSA-1. Morphological and cultural characteristics were employed for the identification of the isolated fungi and they were proved to be Aspergillus fumigatus PBSA-2 and Aspergillus fumigatus PBSA-3. The PBSA degradation activity of the isolated microorganisms was enhanced through the serial acclimation in PBSA plate medium. The PBSA degrading microorganisms appeared to be highly active for the PBSA degradation in that 83% of PBSA was degraded by Streptomyces sp. PBSA-l, and 65% and 75% of PBSA was mineralized by A. fumigatus PBSA2 and A. fumigatus PBSA-3 respectively during 40 days of the modified Sturm test.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.11
• /
• pp.47-54
• /
• 2010

Nowadays, geosynthetics for reinforcement and protection are widely applied to the waste landfill site. Current research indicates the potential for progressive failure in geosynthetic-soil system depends on the interface shear strength governed by several intrinsic factors such as moisture, normal stress, chemical, etc. In particular, the effect of the acidity and basicity from the leachate is intensively reviewed to assess the chemical reaction mechanism of interface shear strength under the cyclic loading condition. New multi-purpose interface apparatus(M-PIA) has been manufactured and the cyclic direct shear tests using submerged geosynthetics and soils under the different chemical conditions have been performed, consequently, the thickness of interface and shear stress degradation are verified. The basic schematic of the Disturbed State Concept(DSC) is employed to estimate the shear stress degradation in the interface, then, normalized disturbed function is obtained and analyzed to describe the shear stress degradation of geosynthetic-soil interface with chemical influence factors under dynamic condition.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.10
• /
• pp.151-161
• /
• 2007

EPS provides a superb self-sufficient stability. Studies on the process of EPS construction method focus on the inchoate phase of general construction, which is increasingly applied to construction sites throughout the world. Unfortunately, there has been little study on the durability and long-term soil behavior involving EPS materials. In this study, the boring, in-site and laboratory tests were conducted to examine the long-term soil behavior in the back-filling of alternating behind the side to which EPS was applied. And results of finite element analysis considering various test results and the soil behavior data measured during the construction show that EPS construction method is a superb process that relieves the load and consequently reduces the settlement, alleviates the stress on the abutment, and prevents lateral flow.

• Journal of Environmental Science International
• /
• v.33 no.7
• /
• pp.477-487
• /
• 2024

This study aimed to identify the growth environment of Cudrania tricuspidata by analyzing the site environment, soil characteristics, and vegetation structure of the species habitats and to provide basic data for identifying suitable cultivation sites for mass production. The study was conducted on 17 sites in five cities/counties of Gyeongnam and Jeonnam province. It was found that C. tricuspidata habitats were mainly distributed on gentle slopes in the southeast and southwest, with an average altitude of approximately 290 m. The soil of the C. tricuspidata habitats was sandy loam with a high proportion of sand, averaging 73.9%, 4.6%, and 21.5% sand, silt, and clay, respectively. The soil had a pH value of 5.41 (5.20-5.79), organic matter content of 8.2% (3.6-12.6%), total nitrogen content of 0.36% (0.19-0.54%), available phosphorus content of 3.50 ppm (0.95-7.61 ppm), and cation exchange capacity of 15.9 cmol⁺/kg (10.0-20.7 cmol⁺/kg) on average. The vegetation structure analysis showed that C. tricuspidata appeared in the tree layers of regions A (Jinju) and E (Yeosu), but the importance of C. tricuspidata was found to be high in the subtree and shrub layers in all regions. The ecological niche breadth was widest (0.874) in region B (Hadong) and narrowest (0.480) in region E (Yeosu).