1 |
Bowles, J. E. (1996), Foundation Analysis and Design, 5th Ed., McGraw-Hill, pp.154-162.
|
2 |
Chai, S.-G. (2000), "Q&A: Characteristics and application of prebored pile method", Geotechnical Engineering, Korean Geotechnical Society, Vol.16, No.7, pp.83-88.
|
3 |
Choi, C., Cho, J., Chung, H., Lee, Y. (2007a), "SPT N-value Estimation from Exerted Electrical Motor Energy for Preboring Pile Installation," Proceedings of 7th Japnanese-Korean-French Seminar on Geo-Environmental Engineering, Grenoble, France, pp.293-298.
|
4 |
Choi, C., Cho, J., Lee, Y., Chung, H.-I., Park, Y.-B. (2007b), "A Study for Predicting Rotational Curtting Torque from Electrical Energy Required for Ground Drilling", Journal of Korean Geotechnical Society, Vol.23, No.7, pp.1-8.
|
5 |
Fang, H.-Y. (1991), Foundation Engineering Handbook, Van Nostrand Reinhood, New York, pp.123-456.
|
6 |
Geotechnical Engineering Research Group (2003), Plan, design, and construction of pile foundation in practice, Gunsul-JeongBo, pp.456-463.
|
7 |
Korea Nation Housing Cooperation (2004), Solutions of Structural Problems for Engineers, pp.40-48. (in Korean)
|
8 |
Lee, M. W. and Yi, C. T. (1989), Improvement of design and construction quality dontrol of pile foundation, Korea Institute of construction Technology, Research report, pp.123-456.
|
9 |
Lee, W. J. (2000), Measurement of pile load transfer using fiber-optic sensor and characteristics of bored precast pile bearing capacity, Ph. D. Thesis, Dept. of Civil and Envoronmental Engr., Korea University.
|
10 |
NI (2012), National Instrument web site, www.ni.com.
|
11 |
Oh, Y. T., Kwon, W. T. and Chu, C. N. (2001a), "Cutting Torque Control in Drilling Part 1 : Design of a Cutting Torque Controller", Journal of the Korean Society of Precision Engineering, Vol.18, No.8, pp.96-106.
|
12 |
Oh, Y. T., Kim, G. D. and Chu, C. N. (2001a), "Cutting Torque Control in Drilling Part 2 : Drilling Torque Control Using Spindle Motor Current and Its Effect on Drill Flank Wear", Journal of the Korean Society of Precision Engineering, Vol.18, No.8, pp.107-115.
|
13 |
Park, Y.-H., Kim, N.-Y. and Yook, J.-H. (2004), Design and Construction of SIP Method(II), Korea Expressway Corporation Research Report, pp.35-39.
|
14 |
Park, J.-B. (2000), Bearing Capacity of Displacement in-situ Concrete Pile, Ph. D. Thesis, Dept. of Civil Engr., Hanyang University.
|
15 |
Perko, H. A. (2000), "Energy Method for Predicting the Installation Torque of Helical Foundations and Anchors", New Technological and Design Developments in Deep Foundations, ASCE, Geotechnical Special Publication No.100, pp.123-456.
|