• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2622-2624
• /
• 2001

In this thesis, speaker separation is employed when speech from two talkers has been summed into one signal and it is desirable to recover one or both of the speech signals from the composite signal. This paper proposed the method that separated the summed speeches and proved the similarity between the signals by the cross correlation between the signals for exact between original signal and separated signal. This paper uses frequency sampling method based on sinusoidal model to separate the composite signal with vocalic speech and vocalic speech and noise masking method based on psycoacoustics model to separate the composite signal with vocalic speech and nonvocalic speech.

• Tunnel and Underground Space
• /
• v.13 no.5
• /
• pp.389-396
• /
• 2003

It is shown that the cubic law can be modified regarding the steady-state Navier-Stokes equations by using perturbation approximation method for a sinusoidal aperture variation. In order to adopt the perturbation theory, the sinusoidal function needs to be non-dimensionalized for the amplitude and wavelength. Then, the steady-state Navier-Stokes equations can be solved by expanding the non-dimensionalized stream function with respect to the small value of the parameter (the ratio of the mean aperture to the wavelength), together with the continuity equation. From the approximate solution of the Navier-Stokes equations, the basic cubic law is successfully modified for the steady-state condition and a sinusoidal aperture variation. A finite difference method is adopted to calculate the pressure within a fracture model, and the results of numerical experiments show the accuracy and applicability of the modified cubic law. As a result, it is noted that the modified cubic law, suggested in this study, will be used for the analysis of fluid flow through aperture geometry of sinusoidal distributions.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.123-126
• /
• 2000

STC(Sinusoidal Transform Coding) 방식은 음성신호의 주파수 영역에서 스펙트럼 피크치들을 정현파로 모델링하여 합성하는 방식을 말한다. 저전송률 STC 방식에서는 전송되는 정보량을 줄이기 위해 스펙트럼 피크를 대신해 음성신호의 스펙트럼 포락선 정보와, 피치정보를 이용하여 얻어지는 고조파 성분들을 정현파로 모델링하여 음성을 합성한다. 본 논문에서는 음성신호의 정현파 모델에 기반하여 2.4kbps 전송속도를 갖는 음성부호화 알고리즘을 제안하였으며, 실험결과로 합성음의 파형과 스펙트럼 특성, 위상특성, 그리고 MOS(Mean Opinion Score) 테스트를 이용한 합성음의 음질을 비교/분석 하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.107-109
• /
• 2005

This paper presents the development of the magnetic position sensor for servo motor. The magnetization system is designed for the sinusoidal magnetic flux density distribution from permanent magnet using 2D finite element method and Preisach model. The magnetic position sensor is composed of the permanent magnet and two Hall elements. And the algorithm calculating the rotating position is suggested by the phase difference of outputs of Hall elements.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.758_759
• /
• 2009

In the design and analysis of electric machines the precise calculation of iron loss has incredible significance. It is tough to foresee iron losses precisely in machines due to distribution of non sinusoidal flux density. It is necessary to approximate the iron losses for the precise computation of efficiency. This paper presents a novel approach for the prediction of iron losses of the brushless dc (BLDC) motors by considering the effects of minor hysteresis loops in the simplified model. The novel iron loss model results are compared with the simplified model and with finite element method (FEM).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.3
• /
• pp.33-38
• /
• 2010

In this paper, the nature of iron loss in electrical steel during alternating field excitation is investigated more precisely. The exact definition of AC iron loss is cleared by accurately measuring the iron loss for conditions of both the sinusoidal magnetic field and sinusoidal magnetic flux density. The results of this approach to iron loss calculations in electrical steel are compared to experimentally-measured losses. In addition, an inverse hysteresis model considering eddy current loss was developed to analyze the iron loss when the input is the voltage source. With this model, the inrush current in the inductor or transformer as well as the iron loss can be calculated.

• Communications for Statistical Applications and Methods
• /
• v.10 no.3
• /
• pp.955-969
• /
• 2003

The classical Fourier analysis, which is the typical frequency domain approach, is used to detect periodic trends that are of the sinusoidal shape in time series data. In this article, using a sequence of periodic step functions, describes an adaptive Fourier series where the patterns may take general periodic shapes that include sinusoidal as a special case. The results, which extend both Fourier analysis and Walsh-Fourier analysis, are applies to investigate the shape of the periodic component. Through the real data, compare the goodness-of-fit of the model using two methods, the adaptive Fourier method which is proposed method in this paper and classical Fourier method.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.928-933
• /
• 1998

This paper presents a novel current control system to eliminate the steady state control error and to improve the transient characteristics for PWM AC-DC converter. A general mathematical model of the converter that is represented as a state-space model is first established. The state-space model is used for the simulation of PWM switching converter with the proposed current control system. The proposed sinusoidal tracking control system that does not require coordinate transformations using principle of the integral controller is described. It is proved that the steady state deviation reduces to zero through a transfer function of source current control system. Finally, it is seen that simulations agree with the experimental results in source current and reference of controlled ac current loop.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.6
• /
• pp.573-578
• /
• 2013

In the case of the Back EMF voltage contains the harmonics, the motor torque ripple and vibration is occurred by the current pulsation, because IPMSM control algorithm is the model which is assumed that it contains a sinusoidal Back EMF voltage. To improve ride quality, in the case of IPMSM for EV, improving the torque control characteristics is necessary. Therefore, there is a need to minimize the influence of the harmonics. In this paper, the investigation to decrease the current distortion factor has been performed for improving torque control characteristics by applying the non-sinusoidal Back EMF to IPMSM model.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.17-20
• /
• 1999

본 논문에서는 중첩 가산 Sinusoidal 합성방식에서 위상계승에 의한 단위음 연결법과 다프레임간 정현파 크기의 보간법을 제안한다. 그리고 합성 프레임의 중심이 pitch onset time이라고 가정하고, 음성에서 분리한 성도 모델의 위상을 음성 전체의 위상으로 사용하는 방법을 제안한다. 제안한 방법으로 문서-음성 변환 시스템 (Text-to-Speech System, TTS System)을 구현한 결과 단위음 연결시 연결부분의 파형 왜곡이 감소함을 알 수 있었고, 부드럽게 연결된 합성음을 얻을 수 있었다.